basic documentation

README.md

@@ -7,18 +7,17 @@
 </div>
 
 # **n**.eko
- This app uses Web RTC to stream a desktop inside of a docker container, I made this because [rabb.it](https://en.wikipedia.org/wiki/Rabb.it) went under and my internet can't handle streaming and discord keeps crashing. I just want to watch anime with my friends ლ(ಠ益ಠლ) so I started digging throughout the net and found a few *kinda* clones, but non of them had the virtual browser, then I found [Turtus](https://github.com/Khauri/Turtus) and I was able to figure out the rest. This is by no means a fully featured clone of rabbit, it hs only *one* room. Its stateless, so no saved user names or passwords. 
+ This app uses Web RTC to stream a desktop inside of a docker container, I made this because [rabb.it](https://en.wikipedia.org/wiki/Rabb.it) went under and my internet can't handle streaming and discord keeps crashing when my friend attempts to. I just want to watch anime with my friends ლ(ಠ益ಠლ) so I started digging throughout the internet and found a few *kinda* clones, but none of them had the virtual browser, then I found [Turtus](https://github.com/Khauri/Turtus) and I was able to figure out the rest. This is by no means a fully featured clone of rabbit, it hs only *one* room. It's stateless, so no saved user names or passwords. 
 
-### Why n.eko?
+### Why **n**.eko?
-I like cats (Neko is the Japanese word for cat), I'm a weeb/nerd
+I like cats 🐱 (`Neko` is the Japanese word for cat), I'm a weeb/nerd
 
-### Why the cat butt?
+***But why the cat butt?*** Because cats are *assholes*, but you love them anyways.
-Because cats are *assholes*, but you love them anyways...
 
 ### Super easy mode setup
-1. Deploy a Server/VPS
+1. Deploy a server or VPS
 
-    *Recommended Specs:* (Note: these may not be correct, I did a small round testing, 4c/4gb worked fine with small hickups here and there)
+    *Recommended Specs:*
     
     | Resolution | Cores | Ram   | Recommendation   |
     |------------|-------|-------|------------------|
@@ -27,7 +26,9 @@ Because cats are *assholes*, but you love them anyways...
     | **720p**   | 6     | 4-6gb | Recommended      |
     | **720p+**  | 8     | 8gb+  | Best Performance |
   
-2. [SSH into your box](https://www.digitalocean.com/docs/droplets/how-to/connect-with-ssh/)
+    ***Why are the specs so high?*** : If you think about it, you have to run a full desktop, a browser (a resource hog on its own) *and* encode/transmit the desktop, there's a lot going on and so it demands some power.
+
+2. [Login via SSH](https://www.digitalocean.com/docs/droplets/how-to/connect-with-ssh/)
 
 3. Install Docker
     ```
@@ -41,16 +42,16 @@ Because cats are *assholes*, but you love them anyways...
     ```
 5. Visit the IP address of the droplet in your browser and login, the default password is `neko`
 
-> *Protip*: Run `nano docker-compose.yaml` to edit the settings, then press *ctrl+x* to exit and save the file.
+> 💡 **Protip**: Run `nano docker-compose.yaml` to edit the settings, then press *ctrl+x* to exit and save the file.
 
 ### Running the container:
 ```
 sudo docker run -p 8080:8080 -e NEKO_PASSWORD='secret' -e NEKO_ADMIN='secret' --shm-size=1gb nurdism/neko:latest 
 ```
 
-*Note:* `--shm-size=1gb` is required, firefox-esr tabs will crash
+*Note:* `--shm-size=1gb` is required, firefox tabs will crash, not sure what it does to be honest 😅
 
-### Config
+### Docker Basic Configuration
 ```
 SCREEN_WIDTH=1280       // Display width
 SCREEN_HEIGHT=720       // Display height
@@ -63,11 +64,21 @@ NEKO_BIND=0.0.0.0:8080  // Bind
 NEKO_KEY=               // (SSL)Key, needed for clipboard sync
 NEKO_CERT=              // (SSL)Cert, needed for clipboard sync
 ```
+for full documentation on configuring the server [go here](./server/README.md)
 
 ### Development
-*Highly* recommend you use a [dev container](https://code.visualstudio.com/docs/remote/containers) for [vscode](https://code.visualstudio.com/), I've included the `.devcontainer` I've used to develop this app. To build neko run:
+*Highly* recommend you use a [dev container](https://code.visualstudio.com/docs/remote/containers) for [vscode](https://code.visualstudio.com/), I've included the `.devcontainer` I've used to develop this app. To build **n**.eko docker container run:
-`cd .docker && ./build`
+```
+cd .docker && ./build
+```
+the `.docker` folder also contains `./test` bash script which will launch a desktop with a browser for testing out any changes with the server.
+
+To run the client with hot loading (for development of new client features)
+```
+cd ./client && npm run serve
+```
 
 ### Non Goals
-  * Turning n.eko into a service that serves multiple rooms and browsers/desktops.
+* Turning n.eko into a service that serves multiple rooms and browsers/desktops.
-  * Voice chat, use [Discord](https://discordapp.com/))
+* Supporting multiple platforms
+* Voice chat, use [Discord](https://discordapp.com/)

client/ABOUT.md

@@ -3,11 +3,10 @@
 </div>
 
 # **n**.eko
- This app uses Web RTC to stream a desktop inside of a docker container, I made this because [rabb.it](https://en.wikipedia.org/wiki/Rabb.it) went under and my internet can't handle streaming and discord keeps crashing. I just want to watch anime with my friends ლ(ಠ益ಠლ) so I started digging throughout the net and found a few *kinda* clones, but non of them had the virtual browser, then I found [Turtus](https://github.com/Khauri/Turtus) and I was able to figure out the rest. This is by no means a fully featured clone of rabbit, it hs only *one* room. Its stateless, so no saved user names or passwords.
+ This app uses Web RTC to stream a desktop inside of a docker container, I made this because [rabb.it](https://en.wikipedia.org/wiki/Rabb.it) went under and my internet can't handle streaming and discord keeps crashing when my friend attempts to. I just want to watch anime with my friends ლ(ಠ益ಠლ) so I started digging throughout the internet and found a few *kinda* clones, but none of them had the virtual browser, then I found [Turtus](https://github.com/Khauri/Turtus) and I was able to figure out the rest. This is by no means a fully featured clone of rabbit, it hs only *one* room. It's stateless, so no saved user names or passwords.
 
-### Why n.eko?
+### Why **n**.eko?
-I like cats (Neko is the Japanese word for cat), I'm a weeb/nerd
+I like cats 🐱 (`Neko` is the Japanese word for cat), I'm a weeb/nerd
 
-### Why the cat butt?
+***But why the cat butt?*** Because cats are *assholes*, but you love them anyways.
-Because cats are *assholes*, but you love them anyways...
 

client/README.md

@@ -1 +1,14 @@
-# n.eko Client
+# **n**.eko client
+Web client for n.eko
+
+### Environment
+------
+```
+VUE_APP_SERVER_PORT   // development server port
+```
+
+### Building
+------
+```
+npm install && npm run build
+```

server/README.md

@@ -1 +1,54 @@
-# n.eko Server
+# **n**.eko server
+Server for n.eko, as of right now this will *only* work on Linux systems, only tested on Debian based distros.
+
+### Configuration
+------
+```
+--debug                       // (bool) enable debug mode
+--logs                        // (bool) save logs to file
+--config ""                   // (string) configuration file path
+--bind "127.0.0.1:8080"       // (string) address/port/socket to serve neko
+--cert ""                     // (string) path to the SSL cert used to secure the neko server
+--key ""                      // (string) path to the SSL key used to secure the neko server
+--static "./www"              // (string) path to neko client files to serve
+--device "auto_null.monitor"  // (string) audio device to capture
+--display ":99.0"             // (string) XDisplay to capture
+--aduio ""                    // (string) audio codec parameters to use for streaming (unused)
+--video ""                    // (string) video codec parameters to use for streaming (unused)
+--epr "59000-59100"           // (string) limits the pool of ephemeral ports that ICE UDP connections can allocate from
+--vp8                         // (bool) use VP8 video codec
+--vp9                         // (bool) use VP9 video codec
+--h264                        // (bool) use H264 video codec
+--opus                        // (bool) use Opus audio codec
+--g722                        // (bool) use G722 audio codec
+--pcmu                        // (bool) use PCMU audio codec
+--pcma                        // (bool) use PCMA audio codec
+--password "neko"             // (string) password for connecting to stream
+--admin "admin"               // (string) admin password for connecting to stream
+```
+
+Config can be set via environment variables with the prefix `NEKO_` (I.E. NEKO_BIND="127.0.0.1:8080")
+
+### Requirements
+------
+Runtime:
+```
+gstreamer1.0-plugins-base // opus plugin
+gstreamer1.0-plugins-good // pulseaudio, ximagesrc & vpx plugins
+gstreamer1.0-plugins-bad  // openh264 plugin (build from source)
+gstreamer1.0-plugins-ugly // x264 plugin
+gstreamer1.0-pulseaudio   // pulseaudio plugin
+xclip                     // clipboard sync
+libxtst6                  // keyboard and mouse input
+```
+
+Development:
+```
+libxtst-dev
+```
+
+### Building
+------
+```
+./build
+```