zint/backend/2of5.c

359 lines
13 KiB
C
Raw Permalink Normal View History

2008-07-14 09:15:55 +12:00
/* 2of5.c - Handles Code 2 of 5 barcodes */
/*
libzint - the open source barcode library
Copyright (C) 2008-2022 Robin Stuart <rstuart114@gmail.com>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
2017-10-24 08:37:52 +13:00
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
2017-10-24 08:37:52 +13:00
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
2017-10-24 08:37:52 +13:00
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
2017-10-24 08:37:52 +13:00
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
2008-07-14 09:15:55 +12:00
#include <stdio.h>
#include "common.h"
#include "gs1.h"
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
static const char C25MatrixTable[10][6] = {
{'1','1','3','3','1','1'}, {'3','1','1','1','3','1'}, {'1','3','1','1','3','1'}, {'3','3','1','1','1','1'},
{'1','1','3','1','3','1'}, {'3','1','3','1','1','1'}, {'1','3','3','1','1','1'}, {'1','1','1','3','3','1'},
{'3','1','1','3','1','1'}, {'1','3','1','3','1','1'}
};
2008-07-14 09:15:55 +12:00
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
static const char C25IndustTable[10][10] = {
{'1','1','1','1','3','1','3','1','1','1'}, {'3','1','1','1','1','1','1','1','3','1'},
{'1','1','3','1','1','1','1','1','3','1'}, {'3','1','3','1','1','1','1','1','1','1'},
{'1','1','1','1','3','1','1','1','3','1'}, {'3','1','1','1','3','1','1','1','1','1'},
{'1','1','3','1','3','1','1','1','1','1'}, {'1','1','1','1','1','1','3','1','3','1'},
{'3','1','1','1','1','1','3','1','1','1'}, {'1','1','3','1','1','1','3','1','1','1'}
};
2008-07-14 09:15:55 +12:00
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
/* Note `c25_common()` assumes Stop string length one less than Start */
static const char *C25MatrixStartStop[2] = { "411111", "41111" };
static const char *C25IndustStartStop[2] = { "313111", "31113" };
static const char *C25IataLogicStartStop[2] = { "1111", "311" };
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
static const char C25InterTable[10][5] = {
{'1','1','3','3','1'}, {'3','1','1','1','3'}, {'1','3','1','1','3'}, {'3','3','1','1','1'}, {'1','1','3','1','3'},
{'3','1','3','1','1'}, {'1','3','3','1','1'}, {'1','1','1','3','3'}, {'3','1','1','3','1'}, {'1','3','1','3','1'}
};
2008-07-14 09:15:55 +12:00
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
static char c25_check_digit(const unsigned int count) {
return itoc((10 - (count % 10)) % 10);
}
/* Common to Standard (Matrix), Industrial, IATA, and Data Logic */
static int c25_common(struct zint_symbol *symbol, const unsigned char source[], int length, const int max,
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
const int is_matrix, const char *start_stop[2], const int start_length, const int error_base) {
2008-07-14 09:15:55 +12:00
int i;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
char dest[500]; /* Largest destination 6 + (80 + 1) * 6 + 5 + 1 = 498 */
char *d = dest;
unsigned char temp[80 + 1 + 1]; /* Largest maximum 80 + optional check digit */
int have_checkdigit = symbol->option_2 == 1 || symbol->option_2 == 2;
2008-07-14 09:15:55 +12:00
if (length > max) {
/* errtxt 301: 303: 305: 307: */
sprintf(symbol->errtxt, "%d: Input too long (%d character maximum)", error_base, max);
return ZINT_ERROR_TOO_LONG;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (!is_sane(NEON_F, source, length)) {
/* errtxt 302: 304: 306: 308: */
sprintf(symbol->errtxt, "%d: Invalid character in data (digits only)", error_base + 1);
return ZINT_ERROR_INVALID_DATA;
}
2012-12-30 07:37:03 +13:00
ustrcpy(temp, source);
if (have_checkdigit) {
/* Add standard GS1 check digit */
temp[length] = gs1_check_digit(source, length);
temp[++length] = '\0';
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
/* Start character */
memcpy(d, start_stop[0], start_length);
d += start_length;
2008-07-14 09:15:55 +12:00
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (is_matrix) {
for (i = 0; i < length; i++, d += 6) {
memcpy(d, C25MatrixTable[temp[i] - '0'], 6);
}
} else {
for (i = 0; i < length; i++, d += 10) {
memcpy(d, C25IndustTable[temp[i] - '0'], 10);
}
}
2008-07-14 09:15:55 +12:00
/* Stop character */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
memcpy(d, start_stop[1], start_length - 1);
d += start_length - 1;
2012-12-30 07:37:03 +13:00
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
expand(symbol, dest, d - dest);
2008-07-14 09:15:55 +12:00
ustrcpy(symbol->text, temp);
if (symbol->option_2 == 2) {
/* Remove check digit from HRT */
symbol->text[length - 1] = '\0';
}
return 0;
}
/* Code 2 of 5 Standard (Code 2 of 5 Matrix) */
INTERNAL int c25standard(struct zint_symbol *symbol, unsigned char source[], int length) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
return c25_common(symbol, source, length, 80, 1 /*is_matrix*/, C25MatrixStartStop, 6, 301);
}
/* Code 2 of 5 Industrial */
INTERNAL int c25ind(struct zint_symbol *symbol, unsigned char source[], int length) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
return c25_common(symbol, source, length, 45, 0 /*is_matrix*/, C25IndustStartStop, 6, 303);
}
/* Code 2 of 5 IATA */
INTERNAL int c25iata(struct zint_symbol *symbol, unsigned char source[], int length) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
return c25_common(symbol, source, length, 45, 0 /*is_matrix*/, C25IataLogicStartStop, 4, 305);
2008-07-14 09:15:55 +12:00
}
/* Code 2 of 5 Data Logic */
INTERNAL int c25logic(struct zint_symbol *symbol, unsigned char source[], int length) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
return c25_common(symbol, source, length, 80, 1 /*is_matrix*/, C25IataLogicStartStop, 4, 307);
2008-07-14 09:15:55 +12:00
}
/* Common to Interleaved, ITF-14, DP Leitcode, DP Identcode */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
static int c25_inter_common(struct zint_symbol *symbol, unsigned char source[], int length,
const int dont_set_height) {
int i, j, error_number = 0;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
char dest[468]; /* 4 + (90 + 2) * 5 + 3 + 1 = 468 */
char *d = dest;
unsigned char temp[90 + 2 + 1];
int have_checkdigit = symbol->option_2 == 1 || symbol->option_2 == 2;
2008-07-14 09:15:55 +12:00
if (length > 90) {
strcpy(symbol->errtxt, "309: Input too long (90 character maximum)");
return ZINT_ERROR_TOO_LONG;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (!is_sane(NEON_F, source, length)) {
strcpy(symbol->errtxt, "310: Invalid character in data (digits only)");
return ZINT_ERROR_INVALID_DATA;
}
temp[0] = '\0';
/* Input must be an even number of characters for Interlaced 2 of 5 to work:
if an odd number of characters has been entered and no check digit or an even number and have check digit
then add a leading zero */
if (((length & 1) && !have_checkdigit) || (!(length & 1) && have_checkdigit)) {
ustrcpy(temp, "0");
length++;
}
ustrncat(temp, source, length);
if (have_checkdigit) {
/* Add standard GS1 check digit */
temp[length] = gs1_check_digit(temp, length);
temp[++length] = '\0';
}
/* start character */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
memcpy(d, "1111", 4);
d += 4;
for (i = 0; i < length; i += 2) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
/* look up the bars and the spaces */
const char *const bars = C25InterTable[temp[i] - '0'];
const char *const spaces = C25InterTable[temp[i + 1] - '0'];
/* then merge (interlace) the strings together */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
for (j = 0; j < 5; j++) {
*d++ = bars[j];
*d++ = spaces[j];
}
}
/* Stop character */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
memcpy(d, "311", 3);
d += 3;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
expand(symbol, dest, d - dest);
ustrcpy(symbol->text, temp);
if (symbol->option_2 == 2) {
/* Remove check digit from HRT */
symbol->text[length - 1] = '\0';
}
if (!dont_set_height) {
if (symbol->output_options & COMPLIANT_HEIGHT) {
/* ISO/IEC 16390:2007 Section 4.4 min height 5mm or 15% of symbol width whichever greater where
(P = character pairs, N = wide/narrow ratio = 3)
width = (P(4N + 6) + N + 6)X = (length / 2) * 18 + 9 */
/* Taking X = 0.330mm from Annex D.3.1 (application specification) */
const float min_height_min = stripf(5.0f / 0.33f);
float min_height = stripf((18.0f * (length / 2) + 9.0f) * 0.15f);
if (min_height < min_height_min) {
min_height = min_height_min;
}
/* Using 50 as default as none recommended */
error_number = set_height(symbol, min_height, min_height > 50.0f ? min_height : 50.0f, 0.0f,
0 /*no_errtxt*/);
} else {
(void) set_height(symbol, 0.0f, 50.0f, 0.0f, 1 /*no_errtxt*/);
}
}
return error_number;
2008-07-14 09:15:55 +12:00
}
/* Code 2 of 5 Interleaved ISO/IEC 16390:2007 */
INTERNAL int c25inter(struct zint_symbol *symbol, unsigned char source[], int length) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
return c25_inter_common(symbol, source, length, 0 /*dont_set_height*/);
}
/* Interleaved 2-of-5 (ITF-14) */
INTERNAL int itf14(struct zint_symbol *symbol, unsigned char source[], int length) {
int i, error_number, warn_number = 0, zeroes;
unsigned char localstr[16] = {0};
if (length > 13) {
strcpy(symbol->errtxt, "311: Input too long (13 character maximum)");
return ZINT_ERROR_TOO_LONG;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (!is_sane(NEON_F, source, length)) {
strcpy(symbol->errtxt, "312: Invalid character in data (digits only)");
return ZINT_ERROR_INVALID_DATA;
}
/* Add leading zeros as required */
zeroes = 13 - length;
for (i = 0; i < zeroes; i++) {
localstr[i] = '0';
}
ustrcpy(localstr + zeroes, source);
/* Calculate the check digit - the same method used for EAN-13 */
localstr[13] = gs1_check_digit(localstr, 13);
localstr[14] = '\0';
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
error_number = c25_inter_common(symbol, localstr, 14, 1 /*dont_set_height*/);
ustrcpy(symbol->text, localstr);
if (!((symbol->output_options & BARCODE_BOX) || (symbol->output_options & BARCODE_BIND))) {
/* If no option has been selected then uses default box option */
symbol->output_options |= BARCODE_BOX;
if (symbol->border_width == 0) { /* Allow override if non-zero */
/* GS1 General Specifications 21.0.1 Sections 5.3.2.4 & 5.3.6 (4.83 / 1.016 ~ 4.75) */
symbol->border_width = 5; /* Note change from previous value 8 */
}
}
if (error_number < ZINT_ERROR) {
if (symbol->output_options & COMPLIANT_HEIGHT) {
/* GS1 General Specifications 21.0.1 5.12.3.2 table 2, including footnote (**): (note bind/box additional
to symbol->height), same as GS1-128: "in case of further space constraints"
height 5.8mm / 1.016mm (X max) ~ 5.7; default 31.75mm / 0.495mm ~ 64.14 */
warn_number = set_height(symbol, stripf(5.8f / 1.016f), stripf(31.75f / 0.495f), 0.0f, 0 /*no_errtxt*/);
} else {
(void) set_height(symbol, 0.0f, 50.0f, 0.0f, 1 /*no_errtxt*/);
}
}
return error_number ? error_number : warn_number;
2008-07-14 09:15:55 +12:00
}
2022-08-06 10:51:24 +12:00
/* Deutsche Post Leitcode */
INTERNAL int dpleit(struct zint_symbol *symbol, unsigned char source[], int length) {
int i, error_number;
unsigned int count;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
int factor;
unsigned char localstr[16] = {0};
int zeroes;
count = 0;
if (length > 13) {
strcpy(symbol->errtxt, "313: Input wrong length (13 character maximum)");
return ZINT_ERROR_TOO_LONG;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (!is_sane(NEON_F, source, length)) {
strcpy(symbol->errtxt, "314: Invalid character in data (digits only)");
return ZINT_ERROR_INVALID_DATA;
}
zeroes = 13 - length;
for (i = 0; i < zeroes; i++)
localstr[i] = '0';
ustrcpy(localstr + zeroes, source);
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
factor = 4;
for (i = 12; i >= 0; i--) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
count += factor * ctoi(localstr[i]);
factor ^= 0x0D; /* Toggles 4 and 9 */
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
localstr[13] = c25_check_digit(count);
localstr[14] = '\0';
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
error_number = c25_inter_common(symbol, localstr, 14, 1 /*dont_set_height*/);
ustrcpy(symbol->text, localstr);
/* TODO: Find documentation on BARCODE_DPLEIT dimensions/height */
return error_number;
2008-07-14 09:15:55 +12:00
}
/* Deutsche Post Identcode */
INTERNAL int dpident(struct zint_symbol *symbol, unsigned char source[], int length) {
int i, error_number, zeroes;
unsigned int count;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
int factor;
unsigned char localstr[16] = {0};
count = 0;
if (length > 11) {
strcpy(symbol->errtxt, "315: Input wrong length (11 character maximum)");
return ZINT_ERROR_TOO_LONG;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (!is_sane(NEON_F, source, length)) {
strcpy(symbol->errtxt, "316: Invalid character in data (digits only)");
return ZINT_ERROR_INVALID_DATA;
}
zeroes = 11 - length;
for (i = 0; i < zeroes; i++)
localstr[i] = '0';
ustrcpy(localstr + zeroes, source);
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
factor = 4;
for (i = 10; i >= 0; i--) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
count += factor * ctoi(localstr[i]);
factor ^= 0x0D; /* Toggles 4 and 9 */
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
localstr[11] = c25_check_digit(count);
localstr[12] = '\0';
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
error_number = c25_inter_common(symbol, localstr, 12, 1 /*dont_set_height*/);
ustrcpy(symbol->text, localstr);
/* TODO: Find documentation on BARCODE_DPIDENT dimensions/height */
return error_number;
2008-07-14 09:15:55 +12:00
}
/* vim: set ts=4 sw=4 et : */