zint/CMakeLists.txt

195 lines
6.7 KiB
CMake
Raw Permalink Normal View History

# Copyright (C) 2008 by BogDan Vatra < bogdan@licentia.eu >
# Copyright (C) 2009-2024 Robin Stuart <rstuart114@gmail.com>
# vim: set ts=4 sw=4 et :
2008-09-19 02:44:52 +12:00
cmake_minimum_required(VERSION 3.5)
2008-09-19 02:44:52 +12:00
project(zint-package)
set(CMAKE_INCLUDE_CURRENT_DIR ON)
set(ZINT_VERSION_MAJOR 2)
2023-12-18 22:44:47 +13:00
set(ZINT_VERSION_MINOR 13)
2022-12-13 10:06:08 +13:00
set(ZINT_VERSION_RELEASE 0)
2023-12-18 23:28:14 +13:00
set(ZINT_VERSION_BUILD 9) # Set to 0 before release, set to 9 after release
set(ZINT_VERSION "${ZINT_VERSION_MAJOR}.${ZINT_VERSION_MINOR}.${ZINT_VERSION_RELEASE}.${ZINT_VERSION_BUILD}")
2008-09-19 02:44:52 +12:00
add_definitions(-DZINT_VERSION=\"${ZINT_VERSION}\")
2008-09-19 02:44:52 +12:00
option(ZINT_DEBUG "Set debug compile flags" OFF)
option(ZINT_NOOPT "Set no optimize compile flags" OFF)
option(ZINT_SANITIZE "Set sanitize compile/link flags" OFF)
option(ZINT_TEST "Set test compile flag" OFF)
option(ZINT_COVERAGE "Set code coverage flags" OFF)
option(ZINT_SHARED "Build shared library" ON)
option(ZINT_STATIC "Build static library" OFF)
option(ZINT_USE_PNG "Build with PNG support" ON)
option(ZINT_USE_QT "Build with Qt support" ON)
option(ZINT_QT6 "If ZINT_USE_QT, use Qt6" OFF)
option(ZINT_UNINSTALL "Add uninstall target" ON)
option(ZINT_FRONTEND "Build frontend" ON)
2019-09-02 07:23:15 +12:00
if(NOT ZINT_SHARED AND NOT ZINT_STATIC)
message(SEND_ERROR "Either ZINT_SHARED or ZINT_STATIC or both must be set")
endif()
include(GNUInstallDirs)
# Taken from old (2008) KDE "SetPaths.cmake"
# Set a default build type for single-configuration CMake generators if no build type is set
if(NOT CMAKE_CONFIGURATION_TYPES AND NOT CMAKE_BUILD_TYPE)
set(CMAKE_BUILD_TYPE RelWithDebInfo)
endif()
2008-09-24 21:00:44 +12:00
include(CheckCCompilerFlag)
include(CheckFunctionExists)
2009-05-22 09:00:23 +12:00
if(NOT MSVC) # Use default warnings if MSVC otherwise inundated
check_c_compiler_flag("-Wall" C_COMPILER_FLAG_WALL)
if(C_COMPILER_FLAG_WALL)
add_compile_options("-Wall")
endif()
check_c_compiler_flag("-Wextra" C_COMPILER_FLAG_WEXTRA)
if(C_COMPILER_FLAG_WEXTRA)
add_compile_options("-Wextra")
endif()
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
# gcc complains about "%n$" `errtxtf()` arguments if "-Wpedantic" used, so only use for clang
if(CMAKE_C_COMPILER_ID MATCHES "Clang")
check_c_compiler_flag("-Wpedantic" C_COMPILER_FLAG_WPEDANTIC)
if(C_COMPILER_FLAG_WPEDANTIC)
add_compile_options("-Wpedantic")
endif()
endif()
check_c_compiler_flag("-Wundef" C_COMPILER_FLAG_WUNDEF)
if(C_COMPILER_FLAG_WUNDEF)
add_compile_options("-Wundef")
endif()
endif()
if(ZINT_DEBUG)
check_c_compiler_flag("-g" C_COMPILER_FLAG_G)
if(C_COMPILER_FLAG_G)
2019-09-02 07:23:15 +12:00
add_compile_options("-g")
endif()
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
endif()
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if(ZINT_NOOPT)
check_c_compiler_flag("-O0" C_COMPILER_FLAG_O0)
if(C_COMPILER_FLAG_O0)
2019-09-02 07:23:15 +12:00
add_compile_options("-O0")
endif()
endif()
if(ZINT_SANITIZE)
if(MSVC)
if(MSVC_VERSION GREATER_EQUAL 1920)
add_compile_options(-fsanitize=address)
message(STATUS "ZINT_SANITIZE: setting -fsanitize=address for MSVC 2019")
else()
message(STATUS "ZINT_SANITIZE: ignoring for MSVC < 2019")
endif()
else()
set(SANITIZERS address undefined)
foreach(sanitizer IN ITEMS ${SANITIZERS})
set(CMAKE_REQUIRED_LIBRARIES -fsanitize=${sanitizer})
check_c_compiler_flag(-fsanitize=${sanitizer} C_COMPILER_FLAG_FSANITIZE_${sanitizer})
if(C_COMPILER_FLAG_FSANITIZE_${sanitizer})
add_compile_options(-fsanitize=${sanitizer})
link_libraries(-fsanitize=${sanitizer})
endif()
unset(CMAKE_REQUIRED_LIBRARIES)
endforeach()
if(NOT ZINT_DEBUG AND CMAKE_C_COMPILER_ID MATCHES "GNU")
# Gives warning on MainWindow::setupUI() and retries (& takes forever) if var-tracking-assignments enabled
add_compile_options(-fno-var-tracking-assignments)
endif()
if(CMAKE_C_COMPILER_ID MATCHES "Clang")
# Recent clangs added deprecation warnings for `sprintf()` that are only triggered on sanitize - suppress
add_compile_options(-Wno-deprecated-declarations)
endif()
endif()
endif()
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if(ZINT_TEST)
enable_testing()
endif()
if(ZINT_COVERAGE)
set(CMAKE_REQUIRED_LIBRARIES -fprofile-arcs)
check_c_compiler_flag(--coverage C_COMPILER_FLAG_COVERAGE)
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
unset(CMAKE_REQUIRED_LIBRARIES)
if(C_COMPILER_FLAG_COVERAGE)
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
add_compile_options(--coverage)
link_libraries(-fprofile-arcs)
check_c_compiler_flag(-O0 C_COMPILER_FLAG_O0)
if(C_COMPILER_FLAG_O0)
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
add_compile_options(-O0)
endif()
endif()
endif()
check_function_exists(getopt_long_only HAVE_GETOPT_LONG_ONLY)
if(NOT HAVE_GETOPT_LONG_ONLY)
add_subdirectory(getopt)
endif()
2008-09-19 02:44:52 +12:00
add_subdirectory(backend)
if(ZINT_FRONTEND)
add_subdirectory(frontend)
endif()
2008-09-19 02:44:52 +12:00
if(NOT ZINT_USE_QT)
message(STATUS "Qt support was disabled for this build")
elseif(ZINT_QT6 OR ($ENV{CMAKE_PREFIX_PATH} MATCHES "6[.][0-9][.][0-9]"))
set(USE_QT6 TRUE)
message(STATUS "Using Qt6")
cmake_policy(SET CMP0012 NEW) # Recognize constants in if()
cmake_policy(SET CMP0072 NEW) # Choose OpenGL over legacy GL
find_package(Qt6Widgets)
find_package(Qt6Gui)
find_package(Qt6UiTools)
find_package(Qt6Svg)
if(Qt6Widgets_FOUND AND Qt6Gui_FOUND AND Qt6UiTools_FOUND AND Qt6Svg_FOUND)
message(STATUS "Qt version: " ${Qt6Core_VERSION_MAJOR}.${Qt6Core_VERSION_MINOR}.${Qt6Core_VERSION_PATCH})
add_subdirectory(backend_qt)
add_subdirectory(frontend_qt)
else()
message(STATUS "Could NOT find Qt6")
endif()
else()
message(STATUS "Using Qt5")
find_package(Qt5Widgets)
find_package(Qt5Gui)
find_package(Qt5UiTools)
find_package(Qt5Svg)
if(Qt5Widgets_FOUND AND Qt5Gui_FOUND AND Qt5UiTools_FOUND AND Qt5Svg_FOUND)
2021-07-07 03:35:04 +12:00
message(STATUS "Qt version: " ${Qt5Core_VERSION_STRING})
# Old Qt does not provide QT_VERSION_MAJOR
if (NOT QT_VERSION_MAJOR)
string(SUBSTRING ${Qt5Core_VERSION_STRING} 0 1 QT_VERSION_MAJOR)
endif()
add_subdirectory(backend_qt)
add_subdirectory(frontend_qt)
else()
message(STATUS "Could NOT find Qt5")
endif()
endif()
if(ZINT_UNINSTALL)
configure_file(
"${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
IMMEDIATE @ONLY)
add_custom_target(uninstall
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
endif()
2022-11-22 03:56:52 +13:00
configure_file("zint-config.cmake.in" "zint-config.cmake" @ONLY)
install(FILES "${CMAKE_CURRENT_BINARY_DIR}/zint-config.cmake" DESTINATION "${CMAKE_INSTALL_DATADIR}/zint")