zint/backend/bc412.c

153 lines
6.0 KiB
C
Raw Permalink Normal View History

2022-07-04 02:47:56 +12:00
/* bc412.c - Handles IBM BC412 (SEMI T1-95) symbology */
/*
libzint - the open source barcode library
Copyright (C) 2022-2024 Robin Stuart <rstuart114@gmail.com>
2022-07-04 02:47:56 +12:00
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
2022-07-04 02:47:56 +12:00
/* A little information about this symbology can be found at
* https://barcodeguide.seagullscientific.com/Content/Symbologies/BC412.htm
*
2022-07-04 02:47:56 +12:00
* Partial specification at
* https://www.wdfxw.net/doc80487518.htm
*
2022-07-04 02:47:56 +12:00
* Checked against the encoder at
* https://www.barcodesoft.com/en/semi/semi-t1-95-bc-412-code */
#include <stdio.h>
#include "common.h"
static const char BROMINE[] = "0R9GLVHA8EZ4NTS1J2Q6C7DYKBUIX3FWP5M";
static const char BC412Table[35][8] = {
{'1','1','1','1','1','1','1','5'}, {'1','3','1','1','1','2','1','2'},
{'1','1','1','3','1','1','1','3'}, {'1','2','1','1','1','2','1','3'},
{'1','2','1','2','1','3','1','1'}, {'1','3','1','3','1','1','1','1'},
{'1','2','1','1','1','3','1','2'}, {'1','1','1','3','1','2','1','2'},
{'1','1','1','2','1','4','1','1'}, {'1','1','1','5','1','1','1','1'},
{'1','5','1','1','1','1','1','1'}, {'1','1','1','1','1','5','1','1'},
{'1','2','1','3','1','2','1','1'}, {'1','3','1','2','1','1','1','2'},
{'1','3','1','1','1','3','1','1'}, {'1','1','1','1','1','2','1','4'},
2022-07-04 02:47:56 +12:00
{'1','2','1','2','1','1','1','3'}, {'1','1','1','1','1','3','1','3'},
{'1','3','1','1','1','1','1','3'}, {'1','1','1','2','1','2','1','3'},
{'1','1','1','4','1','1','1','2'}, {'1','1','1','2','1','3','1','2'},
{'1','1','1','4','1','2','1','1'}, {'1','4','1','2','1','1','1','1'},
{'1','2','1','2','1','2','1','2'}, {'1','1','1','3','1','3','1','1'},
{'1','3','1','2','1','2','1','1'}, {'1','2','1','1','1','4','1','1'},
{'1','4','1','1','1','2','1','1'}, {'1','1','1','1','1','4','1','2'},
{'1','2','1','1','1','1','1','4'}, {'1','4','1','1','1','1','1','2'},
{'1','2','1','4','1','1','1','1'}, {'1','1','1','2','1','1','1','4'},
{'1','2','1','3','1','1','1','2'}
};
INTERNAL int bc412(struct zint_symbol *symbol, unsigned char source[], int length) { /* IBM BC412 */
unsigned char padded_source[20];
2022-07-04 02:47:56 +12:00
int posns[35];
int i, counter_odd = 0, counter_even = 0, check_sum = 0;
char dest[293]; /* 2 + (36 * 8) + 3 */
char *d = dest;
int error_number = 0;
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
if (length > 18) {
return errtxtf(ZINT_ERROR_TOO_LONG, symbol, 790, "Input length %d too long (maximum 18)", length);
}
if (length < 7) {
return errtxtf(ZINT_ERROR_TOO_LONG, symbol, 792, "Input length %d too short (minimum 7)", length);
2022-07-04 02:47:56 +12:00
}
to_upper(source, length);
2022-07-04 02:47:56 +12:00
padded_source[0] = source[0];
padded_source[1] = '0';
2022-07-04 02:47:56 +12:00
for (i = 2; i <= length; i++) {
padded_source[i] = source[i - 1];
}
padded_source[length + 1] = 0;
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
if ((i = not_sane_lookup(BROMINE, 35, padded_source, length + 1, posns))) {
return errtxtf(ZINT_ERROR_INVALID_DATA, symbol, 791,
"Invalid character at position %d in input (alphanumerics only, excluding \"O\")", i - 1);
2022-07-04 02:47:56 +12:00
}
2022-07-04 02:47:56 +12:00
for (i = 0; i <= length; i++) {
if (i % 2) {
counter_even += posns[i];
} else {
counter_odd += posns[i];
}
}
2022-07-04 02:47:56 +12:00
counter_odd %= 35;
counter_even %= 35;
2022-07-04 02:47:56 +12:00
/* Check digit */
check_sum = counter_odd + (2 * counter_even);
check_sum %= 35;
check_sum *= 17;
check_sum %= 35;
2022-07-04 02:47:56 +12:00
if (symbol->debug & ZINT_DEBUG_PRINT) {
printf("BC412 check: %c\n", BROMINE[check_sum]);
}
2022-07-04 02:47:56 +12:00
padded_source[1] = BROMINE[check_sum];
posns[1] = check_sum;
2022-07-04 02:47:56 +12:00
/* Start character */
memcpy(d, "12", 2);
d += 2;
2022-07-04 02:47:56 +12:00
for (i = 0; i <= length; i++, d += 8) {
memcpy(d, BC412Table[posns[i]], 8);
}
2022-07-04 02:47:56 +12:00
/* Stop character */
memcpy(d, "111", 3);
d += 3;
2022-07-04 02:47:56 +12:00
expand(symbol, dest, d - dest);
ustrcpy(symbol->text, padded_source);
if (symbol->output_options & COMPLIANT_HEIGHT) {
/* SEMI T1-95 Table 1 "Module" (Character) Height 2mm ± 0.025mm, using Module Spacing 0.12mm ± 0.025mm as
X-dimension */
const float min_height = 13.6206894f; /* 1.975 / 0.145 */
const float default_height = 16.666666f; /* 2.0 / 0.12 */
const float max_height = 21.3157902f; /* 2.025 / 0.095 */
error_number = set_height(symbol, min_height, default_height, max_height, 0 /*no_errtxt*/);
} else {
/* Using compliant height as default as no backwards compatibility to consider */
const float default_height = 16.666666f; /* 2.0 / 0.12 */
(void) set_height(symbol, 0.0f, default_height, 0.0f, 1 /*no_errtxt*/);
}
2022-07-04 02:47:56 +12:00
return error_number;
}
/* vim: set ts=4 sw=4 et : */