zint/backend/tests/test_bmp.c

305 lines
12 KiB
C
Raw Permalink Normal View History

/*
libzint - the open source barcode library
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
Copyright (C) 2020-2024 Robin Stuart <rstuart114@gmail.com>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
#include "testcommon.h"
#include <sys/stat.h>
INTERNAL int bmp_pixel_plot(struct zint_symbol *symbol, unsigned char *pixelbuf);
static void test_pixel_plot(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int width;
int height;
char *pattern;
int repeat;
int ret;
};
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { 1, 1, "1", 0, 0 },
/* 1*/ { 2, 1, "11", 0, 0 },
/* 2*/ { 2, 2, "10", 1, 0 },
/* 3*/ { 3, 1, "101", 0, 0 },
/* 4*/ { 3, 2, "101010", 0, 0 },
/* 5*/ { 3, 3, "101010101", 0, 0 },
/* 6*/ { 4, 1, "1001", 0, 0 },
/* 7*/ { 4, 3, "1001", 1, 0 },
/* 8*/ { 5, 1, "10101", 0, 0 },
/* 9*/ { 8, 2, "CBMWKRYGGYRKWMBC", 0, 0 },
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, ret;
struct zint_symbol *symbol;
char *bmp = "out.bmp";
char data_buf[8 * 2 + 1];
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
const char *const have_identify = testUtilHaveIdentify();
testStart("test_pixel_plot");
for (i = 0; i < data_size; i++) {
int size;
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
strcpy(symbol->outfile, bmp);
symbol->bitmap_width = data[i].width;
symbol->bitmap_height = data[i].height;
symbol->debug |= debug;
size = data[i].width * data[i].height;
assert_nonzero(size < (int) sizeof(data_buf), "i:%d bmp_pixel_plot size %d < sizeof(data_buf) %d\n", i, size, (int) sizeof(data_buf));
if (data[i].repeat) {
testUtilStrCpyRepeat(data_buf, data[i].pattern, size);
} else {
strcpy(data_buf, data[i].pattern);
}
assert_equal(size, (int) strlen(data_buf), "i:%d bmp_pixel_plot size %d != strlen(data_buf) %d\n", i, size, (int) strlen(data_buf));
if (*data_buf > '9') {
symbol->symbology = BARCODE_ULTRA;
}
symbol->bitmap = (unsigned char *) data_buf;
ret = bmp_pixel_plot(symbol, (unsigned char *) data_buf);
assert_equal(ret, data[i].ret, "i:%d bmp_pixel_plot ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
if (ret < ZINT_ERROR) {
if (have_identify) {
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
ret = testUtilVerifyIdentify(have_identify, symbol->outfile, debug);
assert_zero(ret, "i:%d identify %s ret %d != 0\n", i, symbol->outfile, ret);
}
if (!(debug & ZINT_DEBUG_TEST_KEEP_OUTFILE)) {
assert_zero(testUtilRemove(symbol->outfile), "i:%d testUtilRemove(%s) != 0\n", i, symbol->outfile);
}
} else {
if (!(debug & ZINT_DEBUG_TEST_KEEP_OUTFILE)) {
(void) testUtilRemove(symbol->outfile);
}
}
symbol->bitmap = NULL;
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_print(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
int border_width;
int output_options;
int whitespace_width;
int whitespace_height;
int option_1;
int option_2;
char *fgcolour;
char *bgcolour;
char *data;
char *expected_file;
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_PDF417, -1, -1, 5, -1, -1, -1, "147AD0", "FC9630", "123", "pdf417_fg_bg.bmp" },
/* 1*/ { BARCODE_ULTRA, -1, -1, 5, -1, -1, -1, "147AD0", "FC9630", "123", "ultracode_fg_bg.bmp" },
/* 2*/ { BARCODE_ULTRA, 1, BARCODE_BOX, 1, 1, -1, -1, "147AD0", "FC9630", "123", "ultracode_fg_bg_hvwsp1_box1.bmp" },
/* 3*/ { BARCODE_PDF417COMP, -1, -1, 2, 2, -1, -1, "", "", "123", "pdf417comp_hvwsp2.bmp" },
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol;
const char *data_dir = "/backend/tests/data/bmp";
const char *bmp = "out.bmp";
char expected_file[4096];
char escaped[1024];
int escaped_size = 1024;
unsigned char filebuf[32768];
int filebuf_size;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
const char *const have_identify = testUtilHaveIdentify();
testStart("test_print");
if (p_ctx->generate) {
char data_dir_path[1024];
assert_nonzero(testUtilDataPath(data_dir_path, sizeof(data_dir_path), data_dir, NULL), "testUtilDataPath(%s) == 0\n", data_dir);
if (!testUtilDirExists(data_dir_path)) {
ret = testUtilMkDir(data_dir_path);
assert_zero(ret, "testUtilMkDir(%s) ret %d != 0 (%d: %s)\n", data_dir_path, ret, errno, strerror(errno));
}
}
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, data[i].symbology, -1 /*input_mode*/, -1 /*eci*/, data[i].option_1, data[i].option_2, -1, data[i].output_options, data[i].data, -1, debug);
if (data[i].border_width != -1) {
symbol->border_width = data[i].border_width;
}
if (data[i].whitespace_width != -1) {
symbol->whitespace_width = data[i].whitespace_width;
}
if (data[i].whitespace_height != -1) {
symbol->whitespace_height = data[i].whitespace_height;
}
if (*data[i].fgcolour) {
strcpy(symbol->fgcolour, data[i].fgcolour);
}
if (*data[i].bgcolour) {
strcpy(symbol->bgcolour, data[i].bgcolour);
}
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_zero(ret, "i:%d %s ZBarcode_Encode ret %d != 0 %s\n", i, testUtilBarcodeName(data[i].symbology), ret, symbol->errtxt);
strcpy(symbol->outfile, bmp);
ret = ZBarcode_Print(symbol, 0);
assert_zero(ret, "i:%d %s ZBarcode_Print %s ret %d != 0\n", i, testUtilBarcodeName(data[i].symbology), symbol->outfile, ret);
assert_nonzero(testUtilDataPath(expected_file, sizeof(expected_file), data_dir, data[i].expected_file), "i:%d testUtilDataPath == 0\n", i);
if (p_ctx->generate) {
printf(" /*%3d*/ { %s, %d, %s, %d, %d, %d, %d, \"%s\", \"%s\", \"%s\", \"%s\"},\n",
i, testUtilBarcodeName(data[i].symbology), data[i].border_width, testUtilOutputOptionsName(data[i].output_options),
data[i].whitespace_width, data[i].whitespace_height,
data[i].option_1, data[i].option_2, data[i].fgcolour, data[i].bgcolour,
testUtilEscape(data[i].data, length, escaped, escaped_size), data[i].expected_file);
ret = testUtilRename(symbol->outfile, expected_file);
assert_zero(ret, "i:%d testUtilRename(%s, %s) ret %d != 0 (%d: %s)\n", i, symbol->outfile, expected_file, ret, errno, strerror(errno));
if (have_identify) {
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
ret = testUtilVerifyIdentify(have_identify, expected_file, debug);
assert_zero(ret, "i:%d %s identify %s ret %d != 0\n", i, testUtilBarcodeName(data[i].symbology), expected_file, ret);
}
} else {
assert_nonzero(testUtilExists(symbol->outfile), "i:%d testUtilExists(%s) == 0\n", i, symbol->outfile);
assert_nonzero(testUtilExists(expected_file), "i:%d testUtilExists(%s) == 0\n", i, expected_file);
ret = testUtilCmpBins(symbol->outfile, expected_file);
assert_zero(ret, "i:%d %s testUtilCmpBins(%s, %s) %d != 0\n", i, testUtilBarcodeName(data[i].symbology), symbol->outfile, expected_file, ret);
ret = testUtilReadFile(symbol->outfile, filebuf, sizeof(filebuf), &filebuf_size); /* For BARCODE_MEMORY_FILE */
assert_zero(ret, "i:%d %s testUtilReadFile(%s) %d != 0\n", i, testUtilBarcodeName(data[i].symbology), symbol->outfile, ret);
if (!(debug & ZINT_DEBUG_TEST_KEEP_OUTFILE)) {
assert_zero(testUtilRemove(symbol->outfile), "i:%d testUtilRemove(%s) != 0\n", i, symbol->outfile);
}
symbol->output_options |= BARCODE_MEMORY_FILE;
ret = ZBarcode_Print(symbol, 0);
assert_zero(ret, "i:%d %s ZBarcode_Print %s ret %d != 0 (%s)\n",
i, testUtilBarcodeName(data[i].symbology), symbol->outfile, ret, symbol->errtxt);
assert_nonnull(symbol->memfile, "i:%d %s memfile NULL\n", i, testUtilBarcodeName(data[i].symbology));
assert_equal(symbol->memfile_size, filebuf_size, "i:%d %s memfile_size %d != %d\n",
i, testUtilBarcodeName(data[i].symbology), symbol->memfile_size, filebuf_size);
assert_zero(memcmp(symbol->memfile, filebuf, symbol->memfile_size), "i:%d %s memcmp(memfile, filebuf) != 0\n",
i, testUtilBarcodeName(data[i].symbology));
}
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_outfile(const testCtx *const p_ctx) {
int ret;
int skip_readonly_test = 0;
struct zint_symbol symbol = {0};
unsigned char data[] = { "1" };
(void)p_ctx;
testStart("test_outfile");
symbol.symbology = BARCODE_CODE128;
symbol.bitmap = data;
symbol.bitmap_width = symbol.bitmap_height = 1;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
strcpy(symbol.outfile, "test_bmp_out.bmp");
#ifndef _WIN32
skip_readonly_test = getuid() == 0; /* Skip if running as root on Unix as can't create read-only file */
#endif
if (!skip_readonly_test) {
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static char expected_errtxt[] = "601: Could not open BMP output file ("; /* Excluding OS-dependent `errno` stuff */
(void) testUtilRmROFile(symbol.outfile); /* In case lying around from previous fail */
assert_nonzero(testUtilCreateROFile(symbol.outfile), "bmp_pixel_plot testUtilCreateROFile(%s) fail (%d: %s)\n", symbol.outfile, errno, strerror(errno));
ret = bmp_pixel_plot(&symbol, data);
assert_equal(ret, ZINT_ERROR_FILE_ACCESS, "bmp_pixel_plot ret %d != ZINT_ERROR_FILE_ACCESS (%d) (%s)\n", ret, ZINT_ERROR_FILE_ACCESS, symbol.errtxt);
assert_zero(testUtilRmROFile(symbol.outfile), "bmp_pixel_plot testUtilRmROFile(%s) != 0 (%d: %s)\n", symbol.outfile, errno, strerror(errno));
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
assert_zero(strncmp(symbol.errtxt, expected_errtxt, sizeof(expected_errtxt) - 1), "strncmp(%s, %s) != 0\n", symbol.errtxt, expected_errtxt);
}
symbol.output_options |= BARCODE_STDOUT;
ret = bmp_pixel_plot(&symbol, data);
printf(" - ignore (BMP to stdout)\n"); fflush(stdout);
assert_zero(ret, "bmp_pixel_plot ret %d != 0 (%s)\n", ret, symbol.errtxt);
testFinish();
}
int main(int argc, char *argv[]) {
testFunction funcs[] = { /* name, func */
{ "test_pixel_plot", test_pixel_plot },
{ "test_print", test_print },
{ "test_outfile", test_outfile },
};
testRun(argc, argv, funcs, ARRAY_SIZE(funcs));
testReport();
return 0;
}
/* vim: set ts=4 sw=4 et : */