zint/backend/tests/test_codablock.c

691 lines
54 KiB
C
Raw Permalink Normal View History

2020-03-26 08:33:20 +13:00
/*
libzint - the open source barcode library
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
Copyright (C) 2019-2024 Robin Stuart <rstuart114@gmail.com>
2020-03-26 08:33:20 +13:00
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
2020-03-26 08:33:20 +13:00
#include "testcommon.h"
static void test_large(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int option_1;
int option_2;
char *pattern;
int length;
int ret;
int expected_rows;
int expected_width;
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
char *expected_errtxt;
};
/*
é U+00E9 (\351, 233), UTF-8 C3A9, CodeB-only extended ASCII
*/
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { -1, -1, "A", 2666, 0, 44, 728, "" },
/* 1*/ { -1, -1, "A", 2725, 0, 44, 739, "" },
/* 2*/ { -1, -1, "A", 2726, 0, 44, 739, "" }, /* 4.2.1 c.3 says max 2725 but actually 44 * 62 - 2 == 2726 as mentioned later in 4.8.1 */
/* 3*/ { -1, -1, "A", 2727, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 4*/ { -1, -1, "A", ZINT_MAX_DATA_LEN, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 5*/ { -1, -1, "12", 2726 * 2, 0, 44, 739, "" },
/* 6*/ { -1, -1, "12", 2726 * 2 + 1, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 7*/ { -1, -1, "\351", 2726 / 2, 0, 44, 739, "" },
/* 8*/ { -1, -1, "\351", 2726 / 2 + 1, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 9*/ { -1, -1, "\001", 2726, 0, 44, 739, "" },
/* 10*/ { -1, -1, "\001", 2727, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 11*/ { 1, -1, "A", 99, 0, 1, 1124, "" }, /* CODE128 99 max */
/* 12*/ { 1, -1, "A", 100, ZINT_ERROR_TOO_LONG, -1, -1, "Error 341: Input too long, requires 100 symbol characters (maximum 99)" },
/* 13*/ { 2, -1, "A", 122, 0, 2, 739, "" },
/* 14*/ { 2, 10, "A", 122, 0, 2, 739, "" }, /* Cols 10 -> 67 */
/* 15*/ { 2, 67, "A", 122, 0, 2, 739, "" },
/* 16*/ { 2, -1, "A", 123, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 17*/ { 2, -1, "A", 63 * 2, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" }, /* Triggers initial testColumns > 62 */
/* 18*/ { 2, -1, "A", 2726 * 2 + 1, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 19*/ { 2, 9, "A", 2726 * 2 + 1, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 20*/ { 3, -1, "A", 184, 0, 3, 739, "" },
/* 21*/ { 3, -1, "A", 185, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 22*/ { 10, -1, "A", 618, 0, 10, 739, "" },
/* 23*/ { 10, -1, "A", 619, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 24*/ { 20, -1, "A", 1238, 0, 20, 739, "" },
/* 25*/ { 20, -1, "A", 1239, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 26*/ { 30, -1, "A", 1858, 0, 30, 739, "" },
/* 27*/ { 30, -1, "A", 1859, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 28*/ { 40, -1, "A", 2478, 0, 40, 739, "" },
/* 29*/ { 40, -1, "A", 2479, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 30*/ { 43, -1, "A", 2664, 0, 43, 739, "" },
/* 31*/ { 43, -1, "A", 2665, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 32*/ { 44, -1, "A", 2726, 0, 44, 739, "" },
/* 33*/ { 44, -1, "A", 2727, ZINT_ERROR_TOO_LONG, -1, -1, "Error 413: Input too long, requires too many symbol characters (maximum 2726)" },
/* 34*/ { 44, 60, "A", 2726, 0, 44, 739, "" }, /* Cols 60 -> 67 */
/* 35*/ { 44, 67, "A", 2726, 0, 44, 739, "" },
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
char data_buf[ZINT_MAX_DATA_LEN + 2];
testStartSymbol("test_large", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
testUtilStrCpyRepeat(data_buf, data[i].pattern, data[i].length);
assert_equal(data[i].length, (int) strlen(data_buf), "i:%d length %d != strlen(data_buf) %d\n", i, data[i].length, (int) strlen(data_buf));
length = testUtilSetSymbol(symbol, BARCODE_CODABLOCKF, -1 /*input_mode*/, -1 /*eci*/, data[i].option_1, data[i].option_2, -1, -1 /*output_options*/, data_buf, data[i].length, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data_buf, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
assert_equal(symbol->errtxt[0] == '\0', ret == 0, "i:%d symbol->errtxt not %s (%s)\n", i, ret ? "set" : "empty", symbol->errtxt);
assert_zero(strcmp(symbol->errtxt, data[i].expected_errtxt), "i:%d strcmp(%s, %s) != 0\n", i, symbol->errtxt, data[i].expected_errtxt);
if (ret < ZINT_ERROR) {
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d\n", i, symbol->rows, data[i].expected_rows);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d\n", i, symbol->width, data[i].expected_width);
}
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_options(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
2020-03-26 08:33:20 +13:00
struct item {
int input_mode;
2020-03-26 08:33:20 +13:00
int option_1;
int option_2;
char *data;
2020-03-26 08:33:20 +13:00
int ret;
int expected_rows;
int expected_width;
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
char *expected_errtxt;
char *comment;
2020-03-26 08:33:20 +13:00
};
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { UNICODE_MODE, 1, -1, "é", 0, 1, 57, "", "CODE128" },
/* 1*/ { UNICODE_MODE, -1, -1, "A", 0, 2, 101, "", "Defaults" },
/* 2*/ { UNICODE_MODE, 0, -1, "A", 0, 2, 101, "", "0 rows same as -1" },
/* 3*/ { UNICODE_MODE, 2, -1, "A", 0, 2, 101, "", "Rows 2, columns default" },
/* 4*/ { UNICODE_MODE, 3, -1, "A", 0, 3, 101, "", "Rows 3" },
/* 5*/ { UNICODE_MODE, 43, -1, "A", 0, 43, 101, "", "Rows 43" },
/* 6*/ { UNICODE_MODE, 44, -1, "A", 0, 44, 101, "", "Max rows" },
/* 7*/ { UNICODE_MODE, 45, -1, "A", ZINT_ERROR_INVALID_OPTION, -1, -1, "Error 410: Number of rows '45' out of range (0 to 44)", "" },
/* 8*/ { UNICODE_MODE, -1, -1, "abcdefg", 0, 3, 101, "", "" },
/* 9*/ { UNICODE_MODE, 2, -1, "abcdefg", 0, 2, 112, "", "Rows given so columns expanded" },
/* 10*/ { UNICODE_MODE, 3, -1, "abcdefg", 0, 3, 101, "", "" },
/* 11*/ { UNICODE_MODE, -1, 8, "A", ZINT_ERROR_INVALID_OPTION, -1, -1, "Error 411: Number of columns '8' out of range (9 to 67)", "Min columns 9 (4 data)" },
/* 12*/ { UNICODE_MODE, -1, 9, "A", 0, 2, 101, "", "Min columns 9 (4 data)" },
/* 13*/ { UNICODE_MODE, -1, 10, "A", 0, 2, 112, "", "Columns 10" },
/* 14*/ { UNICODE_MODE, -1, 66, "A", 0, 2, 728, "", "Columns 66" },
/* 15*/ { UNICODE_MODE, -1, 67, "A", 0, 2, 739, "", "Max columns 67 (62 data)" },
/* 16*/ { UNICODE_MODE, -1, 68, "A", ZINT_ERROR_INVALID_OPTION, -1, -1, "Error 411: Number of columns '68' out of range (9 to 67)", "" },
/* 17*/ { UNICODE_MODE, 2, 9, "A", 0, 2, 101, "", "Rows and columns defaults given" },
/* 18*/ { UNICODE_MODE, 2, 10, "A", 0, 2, 112, "", "Rows and columns given" },
/* 19*/ { UNICODE_MODE, 3, 11, "A", 0, 3, 123, "", "" },
/* 20*/ { UNICODE_MODE, 43, 66, "A", 0, 43, 728, "", "" },
/* 21*/ { UNICODE_MODE, 44, 67, "A", 0, 44, 739, "", "Max rows, max columns" },
/* 22*/ { GS1_MODE, -1, -1, "A", ZINT_ERROR_INVALID_OPTION, -1, -1, "Error 220: Selected symbology does not support GS1 mode", "" },
/* 23*/ { GS1_MODE, 1, -1, "A", ZINT_ERROR_INVALID_OPTION, -1, -1, "Error 220: Selected symbology does not support GS1 mode", "Check for CODE128" },
2020-03-26 08:33:20 +13:00
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
2020-03-26 08:33:20 +13:00
testStartSymbol("test_options", &symbol);
for (i = 0; i < data_size; i++) {
2020-03-26 08:33:20 +13:00
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
2020-03-26 08:33:20 +13:00
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, BARCODE_CODABLOCKF, data[i].input_mode, -1 /*eci*/, data[i].option_1, data[i].option_2, -1, -1 /*output_options*/, data[i].data, -1, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
assert_zero(strcmp(symbol->errtxt, data[i].expected_errtxt), "i:%d strcmp(%s, %s) != 0\n", i, symbol->errtxt, data[i].expected_errtxt);
assert_equal(symbol->errtxt[0] == '\0', ret == 0, "i:%d symbol->errtxt not %s (%s)\n", i, ret ? "set" : "empty", symbol->errtxt);
if (ret < ZINT_ERROR) {
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d (%s)\n", i, symbol->rows, data[i].expected_rows, data[i].data);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d (%s)\n", i, symbol->width, data[i].expected_width, data[i].data);
}
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_reader_init(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
int input_mode;
int output_options;
char *data;
int ret;
int expected_rows;
int expected_width;
char *expected;
char *comment;
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_CODABLOCKF, UNICODE_MODE, READER_INIT, "1234", 0, 2, 101, "67 64 40 60 63 0C 22 2B 6A 67 64 0B 63 64 3A 1C 29 6A", "CodeB FNC3 CodeC 12 34 / CodeB Pads" },
/* 1*/ { BARCODE_CODABLOCKF, UNICODE_MODE, READER_INIT, "\001\002", 0, 2, 101, "67 62 40 60 41 42 63 32 6A 67 64 0B 63 64 45 42 0F 6A", "FNC3 SOH STX / CodeB Pads" },
/* 2*/ { BARCODE_HIBC_BLOCKF, UNICODE_MODE, READER_INIT, "123456", 0, 3, 101, "67 64 41 60 0B 11 12 22 6A 67 63 2B 22 38 64 2A 1B 6A 67 64 0C 63 64 2B 2F 52 6A", "CodeB FNC3 + 1 2 / CodeC 34 56 CodeB J" },
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
char escaped[1024];
testStartSymbol("test_reader_init", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
symbol->debug = ZINT_DEBUG_TEST; /* Needed to get codeword dump in errtxt */
length = testUtilSetSymbol(symbol, data[i].symbology, data[i].input_mode, -1 /*eci*/, -1 /*option_1*/, -1 /*option_2*/, -1, data[i].output_options, data[i].data, -1, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
if (p_ctx->generate) {
printf(" /*%3d*/ { %s, %s, %s, \"%s\", %s, %d, %d, \"%s\", \"%s\" },\n",
i, testUtilBarcodeName(data[i].symbology), testUtilInputModeName(data[i].input_mode), testUtilOutputOptionsName(data[i].output_options),
testUtilEscape(data[i].data, length, escaped, sizeof(escaped)),
testUtilErrorName(data[i].ret), symbol->rows, symbol->width, symbol->errtxt, data[i].comment);
} else {
if (ret < ZINT_ERROR) {
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d (%s)\n", i, symbol->rows, data[i].expected_rows, data[i].data);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d (%s)\n", i, symbol->width, data[i].expected_width, data[i].data);
assert_zero(strcmp((char *) symbol->errtxt, data[i].expected), "i:%d strcmp(%s, %s) != 0\n", i, symbol->errtxt, data[i].expected);
}
}
2020-03-26 08:33:20 +13:00
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_input(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
int input_mode;
int option_1;
int option_2;
char *data;
int length;
int ret;
int expected_rows;
int expected_width;
int bwipp_cmp;
char *expected;
char *comment;
};
/*
NUL U+0000, CodeA-only
US U+001F (\037, 31), CodeA-only
a U+0061 (\141, 97), CodeB-only
DEL U+007F (\177, 127), CodeB-only
PAD U+0080 (\200, 128), UTF-8 C280 (\302\200), CodeA-only extended ASCII, not in ISO 8859-1
APC U+009F (\237, 159), UTF-8 C29F, CodeA-only extended ASCII, not in ISO 8859-1
NBSP U+00A0 (\240, 160), UTF-8 C2A0, CodeA and CodeB extended ASCII
ß U+00DF (\337, 223), UTF-8 C39F, CodeA and CodeB extended ASCII
à U+00E0 (\340, 224), UTF-8 C3A0, CodeB-only extended ASCII
á U+00E1 (\341, 225), UTF-8 C3A1, CodeB-only extended ASCII
é U+00E9 (\351, 233), UTF-8 C3A9, CodeB-only extended ASCII
ñ U+00F1 (\361, 241), UTF-8 C3B1, CodeB-only extended ASCII
ÿ U+00FF (\377, 255), UTF-8 C3BF, CodeB-only extended ASCII
*/
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "A", -1, 0, 2, 101, 1, "67 64 40 21 63 64 63 42 6A 67 64 0B 63 64 2B 40 4F 6A", "Fillings 5" },
/* 1*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "AAA", -1, 0, 2, 101, 1, "67 64 40 21 21 21 63 55 6A 67 64 0B 63 64 0E 57 48 6A", "Fillings 3" },
/* 2*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "AAAA", -1, 0, 2, 101, 1, "67 64 40 21 21 21 21 65 6A 67 64 0B 63 64 1A 0E 03 6A", "Fillings 2" },
/* 3*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "AAAAA", -1, 0, 2, 101, 1, "67 64 40 21 21 21 21 65 6A 67 64 0B 21 63 1D 30 14 6A", "Fillings 1" },
/* 4*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "AAAAAA", -1, 0, 2, 101, 1, "67 64 40 21 21 21 21 65 6A 67 64 0B 21 21 35 5D 2B 6A", "Fillings 0" },
/* 5*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "1234", -1, 0, 2, 101, 1, "67 63 00 0C 22 64 63 1A 6A 67 64 0B 63 64 3A 1C 29 6A", "Fillings 4" },
/* 6*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "12345", -1, 0, 2, 101, 1, "67 63 00 0C 22 64 15 49 6A 67 64 0B 63 64 41 44 07 6A", "Fillings 2 (not counting CodeB at end of 1st line)" },
/* 7*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "123456", -1, 0, 2, 101, 1, "67 63 00 0C 22 38 64 12 6A 67 64 0B 63 64 2D 50 52 6A", "Fillings 3" },
/* 8*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "1234567", -1, 0, 2, 101, 1, "67 63 00 0C 22 38 64 12 6A 67 64 0B 17 63 16 02 5B 6A", "Fillings 1 (not counting CodeB at end of 1st line)" },
/* 9*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "12345678", -1, 0, 2, 101, 1, "67 63 00 0C 22 38 4E 5C 6A 67 64 0B 63 64 08 1C 64 6A", "Fillings 2" },
/* 10*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "123456789", -1, 0, 2, 101, 1, "67 63 00 0C 22 38 4E 5C 6A 67 64 0B 19 63 25 4C 65 6A", "Fillings 1" },
/* 11*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "1234567890", -1, 0, 2, 101, 0, "67 63 00 0C 22 38 4E 5C 6A 67 64 0B 19 10 41 38 62 6A", "Fillings 0; BWIPP different encodation (CodeB 9 0 instead of CodeC 90" },
/* 12*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "A123ñ", -1, 0, 2, 101, 1, "67 64 40 21 11 12 13 54 6A 67 64 0B 64 51 42 28 50 6A", "K1/K2 example in Annex F" },
/* 13*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "", -1, 0, 2, 101, 1, "67 64 40 41 64 3F 63 54 6A 67 64 0B 63 64 5B 1D 06 6A", "CodeB a FNC4 ß fits 1st line" },
/* 14*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\037ß", -1, 0, 2, 101, 1, "67 62 40 5F 65 3F 63 49 6A 67 64 0B 63 64 0F 1D 26 6A", "CodeA US FNC4 ß fits 1st line" },
/* 15*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "aaß", -1, 0, 2, 101, 1, "67 64 40 41 41 64 3F 10 6A 67 64 0B 63 64 4E 5B 04 6A", "CodeB a a FNC4 ß fits 1st line" },
/* 16*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\037\037ß", -1, 0, 2, 101, 1, "67 62 40 5F 5F 65 3F 17 6A 67 64 0B 63 64 34 0F 24 6A", "CodeA US US FNC4 ß fits 1st line" },
/* 17*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "aaaß", -1, 0, 2, 101, 1, "67 64 40 41 41 41 63 39 6A 67 64 0B 64 3F 4C 4E 50 6A", "CodeB a (3) / CodeB FNC4 ß fully on next line" },
/* 18*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\037\037\037ß", -1, 0, 2, 101, 1, "67 62 40 5F 5F 5F 63 03 6A 67 64 0B 64 3F 0E 34 1A 6A", "CodeA US (3) / CodeB FNC4 ß fully on next line" },
/* 19*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "", -1, 0, 2, 101, 1, "67 64 40 41 64 40 63 59 6A 67 64 0B 63 64 5D 1E 16 6A", "CodeB a FNC4 à fits 1st line" },
/* 20*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\037à", -1, 0, 2, 101, 0, "67 62 40 5F 65 62 40 26 6A 67 64 0B 63 64 1B 1E 01 6A", "CodeA US FNC4 Shift à fits 1st line; BWIPP different encodation (CodeB instead of Shift)" },
/* 21*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\037àa", -1, 0, 2, 101, 0, "67 62 40 5F 64 64 40 2C 6A 67 64 0B 41 63 52 4A 16 6A", "CodeA US LatchB FNC4 à fits 1st line / Code B a; BWIPP diffent encodation (as above)" },
/* 22*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "aaà", -1, 0, 2, 101, 1, "67 64 40 41 41 64 40 16 6A 67 64 0B 63 64 51 5D 1F 6A", "CodeB a a FNC4 à fits 1st line" },
/* 23*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\037\037à", -1, 0, 2, 101, 1, "67 62 40 5F 5F 63 64 1D 6A 67 64 0B 64 40 37 1B 55 6A", "CodeA US US / Code B FNC4 à fully on next line" },
/* 24*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "aaaà", -1, 0, 2, 101, 1, "67 64 40 41 41 41 63 39 6A 67 64 0B 64 40 50 51 13 6A", "CodeB a (3) / Code B FNC4 à fully on next line" },
/* 25*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\037\037\037à", -1, 0, 2, 101, 1, "67 62 40 5F 5F 5F 63 03 6A 67 64 0B 64 40 1C 37 0F 6A", "CodeA US (3) / CodeB FNC4 à fully on next line" },
/* 26*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, -1, "\037\200", -1, 0, 2, 101, 1, "67 62 40 5F 65 40 63 4E 6A 67 64 0B 63 64 5D 0A 05 6A", "CodeA US FNC4 PAD fits 1st line" },
/* 27*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, -1, "\141\200", -1, 0, 2, 101, 0, "67 64 40 41 64 62 40 31 6A 67 64 0B 63 64 49 0A 08 6A", "CodeB a FNC4 Shift PAD fits 1st line; BWIPP different encodation (CodeA instead of Shift)" },
/* 28*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, -1, "\141\200\037", -1, 0, 2, 101, 0, "67 64 40 41 65 65 40 44 6A 67 62 0B 5F 63 10 12 3E 6A", "CodeB a LatchA FNC4 PAD fits 1st line / CodeA US; BWIPP diffent encodation (as above)" },
/* 29*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, -1, "\037\037\200", -1, 0, 2, 101, 1, "67 62 40 5F 5F 65 40 1D 6A 67 64 0B 63 64 0F 5D 0A 6A", "CodeA US US FNC4 PAD fits 1st line" },
/* 30*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, -1, "\141\141\200", -1, 0, 2, 101, 1, "67 64 40 41 41 63 64 1B 6A 67 62 0B 65 40 33 49 21 6A", "CodeB a a / CodeA FNC4 PAD fully on next line" },
/* 31*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, -1, "\037\037\037\200", -1, 0, 2, 101, 1, "67 62 40 5F 5F 5F 63 03 6A 67 62 0B 65 40 4A 0F 06 6A", "CodeA US (3) / CodeA FNC4 PAD fully on next line" },
/* 32*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, -1, "\141\141\141\200", -1, 0, 2, 101, 1, "67 64 40 41 41 41 63 39 6A 67 62 0B 65 40 28 33 34 6A", "CodeB a (3) / CodeA FNC4 PAD fully on next line" },
/* 33*/ { BARCODE_CODABLOCKF, DATA_MODE, -1, 10, "\200\240\237\340\337\341\377", -1, 0, 4, 112, 0, "(40) 67 62 42 65 40 65 00 63 1E 6A 67 62 0B 65 5F 64 64 40 55 6A 67 64 0C 64 3F 64 41 63", "BWIPP different encodation (CodeB before FNC4 instead of after)" },
/* 34*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "\000a\037\177}12", 7, 0, 3, 101, 1, "67 62 41 40 62 41 5F 3B 6A 67 64 0B 5F 5D 11 12 2D 6A 67 64 0C 63 64 40 05 26 6A", "" },
/* 35*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "abcdéf", -1, 0, 3, 101, 1, "67 64 41 41 42 43 44 5D 6A 67 64 0B 64 49 46 63 0A 6A 67 64 0C 63 64 4F 26 02 6A", "" },
/* 36*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "a12é\000", 6, 0, 3, 101, 0, "67 64 41 41 11 12 63 2C 6A 67 64 0B 64 49 62 40 2B 6A 67 64 0C 63 64 33 34 31 6A", "BWIPP different encodation (CodeA instead of Shift)" },
/* 37*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, 11, "1234\001", -1, 0, 2, 123, 1, "67 63 00 0C 22 65 41 63 64 54 6A 67 64 0B 63 64 63 64 3F 20 24 6A", "" },
/* 38*/ { BARCODE_CODABLOCKF, UNICODE_MODE, 3, -1, "ÁÁÁÁÁÁ99999999999999ÁÁÁÁÁÁÁ99999999999999Á", -1, 0, 3, 244, 1, "(66) 67 64 41 64 21 64 21 64 21 64 21 64 21 64 21 63 63 63 63 63 56 6A 67 63 2B 63 63 63", "Latching to extended ASCII not used by `codablockf()` (see test_code128 Okapi)" },
/* 39*/ { BARCODE_CODABLOCKF, DATA_MODE, 2, -1, "@g(\302\302\302\302\3025555\302\302\302\302\302\302\302\302", -1, 0, 2, 255, 1, "(46) 67 64 40 20 47 08 64 22 64 22 64 22 64 22 64 22 63 37 37 64 63 4B 6A 67 64 0B 64 22", "Must allow for FNC4 when testing if enough room when switching from CodeC" },
/* 40*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "ÿ\012àa\0121\012àAà", -1, 0, 5, 101, 0, "(45) 67 64 43 64 5F 65 4A 09 6A 67 64 0B 64 40 41 63 34 6A 67 62 0C 4A 11 4A 63 25 6A 67", "BWIPP different encoding (Shift instead of CodeA)" },
/* 41*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "ÿy1234\012àa\0121\0127890àAàDà\012à", -1, 0, 7, 112, 0, "(70) 67 64 45 64 5F 59 11 12 2E 6A 67 62 0B 13 14 4A 63 64 43 6A 67 64 0C 64 40 41 65 4A", "BWIPP different encoding (Shift instead of CodeA)" },
/* 42*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "ÿ12345678\012à12345678abcdef\0121\01223456\012\0127890àAàBCDEFà\012\012à", -1, 0, 8, 134, 0, "(96) 67 64 46 64 5F 63 0C 22 38 4E 5E 6A 67 62 0B 4A 64 64 40 63 0C 22 2B 6A 67 63 2C 38", "BWIPP different encoding (CodeB before FNC4 instead of after)" },
/* 43*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "123456789012345ABCDEFGHI\012123456ÿ12345678\012à12345678abcdef\012\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890àààààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄÄÄÄÄÄÄÄÄÄ2ÄÄÄÄÄÄÄÄ4ÄÄÄÄÄÄAÄÄÄÄÄÄaÄÄÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécé123456789012345ABCDEFGHI\012123456ÿ12345678\012à12345678abcdef\012\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890àààààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄÄÄÄÄÄÄÄÄÄ2ÄÄÄÄÄÄÄÄ4ÄÄÄÄÄÄAÄÄÄÄÄÄaÄÄÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécé12345123456789012345ABCDEFGHI\012123456ÿ12345678\012à12345678abcdef\012\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890àààààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄÄÄÄÄÄÄÄÄÄ2ÄÄÄÄÄÄÄÄ4ÄÄÄÄÄÄAÄÄÄÄÄÄaÄÄÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécé123456789012345ABCDEFGHI\012123456ÿ12345678\012à12345678abcdef\012\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890àààààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2" "B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄÄÄÄÄÄÄÄÄÄ2ÄÄÄÄÄÄÄÄ4ÄÄÄÄÄÄAÄÄÄÄÄÄaÄÄÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécé6789012345ABCDEFGHI\012123456ÿ12345678\012à12345678abcdef\012\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890àààààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄÄÄÄÄÄÄÄÄÄ2ÄÄÄÄÄÄÄÄ4ÄÄÄÄÄÄAÄÄÄÄÄÄaÄÄÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécé123456789012345ABCDEFGHI\012123456ÿ12345678\012à12345678abcdef\012\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890àààààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\012123456à\012à\012à\0123Ä4Ä5Ä6AÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécéÄÄÄÄÄÄ2ÄÄÄÄÄÄÄÄ4ÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécéÄÄÄAÄÄÄÄÄÄaÄÄÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécé", -1, 0, 44, 739, 0, "(2948) 67 63 2A 0C 22 38 4E 5A 0C 22 65 15 21 22 23 24 25 26 27 28 29 4A 63 0C 22 38 64", "BWIPP gs command too long" },
/* 44*/ { BARCODE_CODABLOCKF, UNICODE_MODE, -1, -1, "ÿ12345678\012à12345678abcdef\012\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890ààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄÄÄÄÄ2ÄÄÄÄÄÄ4ÄÄÄÄÄÄaÄÄÄÄé1é2é34é56Ä78é9éAéBéCéééééaébécé123456789012345ABCDEFGHI\012123456ÿ12345678\012à12345678abcdef\012123456\012\0127890àABCDEFà\012\012ààGHIJKàLMNOPQabc\012defà1234567ghijk\012\012à901234\0122567890àààààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2B3C4a5b6c7d8e9\0120\0121\0122\0123Ä4Ä5Ä6A7a8A9a0\012Ä12345678ÄÄ2Ä4ÄaÄé1é2é34é56Ä78é9éAéBéCééaébécé123456789012345ABCDEF\012123456ÿ123456\012à12345678abcdef\012\0121234\012\0127890àABCDà\012\012ààGHIJKàLMabc\012defà1234567ghijk\012\012à901234\012\012\012\012567890ààABCDEFGààà\012\012\012HIJK\012\012\012\012à\012à\012à\01212345à\012à\012à67890ààÄ9012ÄÄ56789Ä12Ä3\0124\0125\0126A\012a\012A\012A\012a\012a\012BCD1A2", -1, 0, 33, 387, 0, "(1155) 67 64 5F 64 5F 63 0C 22 38 4E 65 4A 64 64 40 63 0C 22 38 4E 64 41 42 43 44 45 46", "BWIPP different encodation" },
/* 45*/ { BARCODE_HIBC_BLOCKF, UNICODE_MODE, -1, -1, "A99912345/$$52001510X3", -1, 0, 6, 101, 1, "(54) 67 64 44 0B 21 19 19 3A 6A 67 63 2B 5B 17 2D 64 24 6A 67 64 0C 0F 04 04 15 16 6A 67", "" },
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
/* 46*/ { BARCODE_HIBC_BLOCKF, UNICODE_MODE, -1, -1, "A99912345/$$520:1510X3", -1, ZINT_ERROR_INVALID_DATA, -1, -1, 1, "Error 203: Invalid character at position 16 in input (alphanumerics, space and \"-.$/+%\" only)", "" },
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
char escaped[16834];
char cmp_buf[32768];
char cmp_msg[32768];
int do_bwipp = (debug & ZINT_DEBUG_TEST_BWIPP) && testUtilHaveGhostscript(); /* Only do BWIPP test if asked, too slow otherwise */
int do_zxingcpp = (debug & ZINT_DEBUG_TEST_ZXINGCPP) && testUtilHaveZXingCPPDecoder(); /* Only do ZXing-C++ test if asked, too slow otherwise */
testStartSymbol("test_input", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
symbol->debug = ZINT_DEBUG_TEST; /* Needed to get codeword dump in errtxt */
length = testUtilSetSymbol(symbol, data[i].symbology, data[i].input_mode, -1 /*eci*/, data[i].option_1, data[i].option_2, -1, -1 /*output_options*/, data[i].data, data[i].length, debug);
2020-03-26 08:33:20 +13:00
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
if (p_ctx->generate) {
printf(" /*%3d*/ { %s, %s, %d, %d, \"%s\", %d, %s, %d, %d, %d, \"%s\", \"%s\" },\n",
i, testUtilBarcodeName(data[i].symbology), testUtilInputModeName(data[i].input_mode), data[i].option_1, data[i].option_2,
testUtilEscape(data[i].data, length, escaped, sizeof(escaped)), data[i].length,
testUtilErrorName(data[i].ret), symbol->rows, symbol->width, data[i].bwipp_cmp, symbol->errtxt, data[i].comment);
} else {
assert_zero(strcmp((char *) symbol->errtxt, data[i].expected), "i:%d strcmp(%s, %s) != 0\n", i, symbol->errtxt, data[i].expected);
if (ret < ZINT_ERROR) {
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d (%s)\n", i, symbol->rows, data[i].expected_rows, data[i].data);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d (%s)\n", i, symbol->width, data[i].expected_width, data[i].data);
if (do_bwipp && testUtilCanBwipp(i, symbol, data[i].option_1, data[i].option_2, -1, debug)) {
if (!data[i].bwipp_cmp) {
if (debug & ZINT_DEBUG_TEST_PRINT) printf("i:%d %s not BWIPP compatible (%s)\n", i, testUtilBarcodeName(symbol->symbology), data[i].comment);
} else {
char modules_dump[32768];
assert_notequal(testUtilModulesDump(symbol, modules_dump, sizeof(modules_dump)), -1, "i:%d testUtilModulesDump == -1\n", i);
ret = testUtilBwipp(i, symbol, data[i].option_1, data[i].option_2, -1, data[i].data, length, NULL, cmp_buf, sizeof(cmp_buf), NULL);
assert_zero(ret, "i:%d %s testUtilBwipp ret %d != 0\n", i, testUtilBarcodeName(symbol->symbology), ret);
ret = testUtilBwippCmp(symbol, cmp_msg, cmp_buf, modules_dump);
assert_zero(ret, "i:%d %s testUtilBwippCmp %d != 0 %s\n actual: %s\nexpected: %s\n",
i, testUtilBarcodeName(symbol->symbology), ret, cmp_msg, cmp_buf, modules_dump);
}
}
if (do_zxingcpp && testUtilCanZXingCPP(i, symbol, data[i].data, length, debug)) {
int cmp_len, ret_len;
char modules_dump[32768];
assert_notequal(testUtilModulesDump(symbol, modules_dump, sizeof(modules_dump)), -1, "i:%d testUtilModulesDump == -1\n", i);
ret = testUtilZXingCPP(i, symbol, data[i].data, length, modules_dump, cmp_buf, sizeof(cmp_buf), &cmp_len);
assert_zero(ret, "i:%d %s testUtilZXingCPP ret %d != 0\n", i, testUtilBarcodeName(symbol->symbology), ret);
ret = testUtilZXingCPPCmp(symbol, cmp_msg, cmp_buf, cmp_len, data[i].data, length, NULL /*primary*/, escaped, &ret_len);
assert_zero(ret, "i:%d %s testUtilZXingCPPCmp %d != 0 %s\n actual: %.*s\nexpected: %.*s\n",
i, testUtilBarcodeName(symbol->symbology), ret, cmp_msg, cmp_len, cmp_buf, ret_len, escaped);
}
}
}
2020-03-26 08:33:20 +13:00
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_encode(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
int option_1;
int option_2;
char *data;
int ret;
int expected_rows;
int expected_width;
int bwipp_cmp;
char *comment;
char *expected;
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_CODABLOCKF, 1, -1, "AIM", 0, 1, 68, 1, "Same as CODE128 (not supported by BWIPP or ZXing-C++)",
"11010010000101000110001100010001010111011000101110110001100011101011"
},
/* 1*/ { BARCODE_CODABLOCKF, -1, -1, "AAAAAAA", 0, 3, 101, 1, "Defaults to rows 3, columns 9 (4 data); verified manually against tec-it",
"11010000100101111011101001011000010100011000101000110001010001100010100011000110110011001100011101011"
"11010000100101111011101100010010010100011000101000110001010001100010111011110100100111101100011101011"
"11010000100101111011101011001110010111011110101111011101100001010011011101110111100101001100011101011"
},
/* 2*/ { BARCODE_CODABLOCKF, -1, -1, "AAAAAAAAAA", 0, 3, 101, 1, "Defaults to rows 3, columns 9 (4 data); verified manually against tec-it",
"11010000100101111011101001011000010100011000101000110001010001100010100011000110110011001100011101011"
"11010000100101111011101100010010010100011000101000110001010001100010100011000111101000101100011101011"
"11010000100101111011101011001110010100011000101000110001110110010010010110000111000101101100011101011"
},
/* 3*/ { BARCODE_CODABLOCKF, -1, -1, "AAAAAAAAAAA", 0, 4, 101, 1, "Defaults to rows 4, columns 9 (4 data); verified manually against tec-it",
"11010000100101111011101001000011010100011000101000110001010001100010100011000110011001101100011101011"
"11010000100101111011101100010010010100011000101000110001010001100010100011000111101000101100011101011"
"11010000100101111011101011001110010100011000101000110001010001100010111011110100111101001100011101011"
"11010000100101111011101001101110010111011110101111011101110101100011101100100110010111001100011101011"
},
/* 4*/ { BARCODE_CODABLOCKF, -1, -1, "AAAAAAAAAAAAAA", 0, 4, 101, 1, "Defaults to rows 4, columns 9 (4 data); verified manually against tec-it",
"11010000100101111011101001000011010100011000101000110001010001100010100011000110011001101100011101011"
"11010000100101111011101100010010010100011000101000110001010001100010100011000111101000101100011101011"
"11010000100101111011101011001110010100011000101000110001010001100010100011000101111011101100011101011"
"11010000100101111011101001101110010100011000101000110001011110100010111011000100110000101100011101011"
},
/* 5*/ { BARCODE_CODABLOCKF, -1, -1, "AAAAAAAAAAAAAAA", 0, 5, 101, 1, "Defaults to rows 5, columns 9 (4 data); verified manually against tec-it",
"11010000100101111011101000010110010100011000101000110001010001100010100011000100100011001100011101011"
"11010000100101111011101100010010010100011000101000110001010001100010100011000111101000101100011101011"
"11010000100101111011101011001110010100011000101000110001010001100010100011000101111011101100011101011"
"11010000100101111011101001101110010100011000101000110001010001100010111011110111101001001100011101011"
"11010000100101111011101001100111010111011110101111011101000110001010111101000110001010001100011101011"
},
/* 6*/ { BARCODE_CODABLOCKF, -1, 14, "AAAAAAAAAAAAAAA", 0, 2, 156, 1, "Rows 2, columns 14 (9 data); verified manually against tec-it",
"110100001001011110111010100001100101000110001010001100010100011000101000110001010001100010100011000101000110001010001100010100011000110001000101100011101011"
"110100001001011110111011000100100101000110001010001100010100011000101000110001010001100010100011000101110111101110111101011011000110111000101101100011101011"
},
/* 7*/ { BARCODE_CODABLOCKF, -1, -1, "AAAAAAAAAAAAAAAA", 0, 5, 101, 1, "Defaults to rows 5, columns 9 (4 data); verified manually against tec-it",
"11010000100101111011101000010110010100011000101000110001010001100010100011000100100011001100011101011"
"11010000100101111011101100010010010100011000101000110001010001100010100011000111101000101100011101011"
"11010000100101111011101011001110010100011000101000110001010001100010100011000101111011101100011101011"
"11010000100101111011101001101110010100011000101000110001010001100010100011000111101011101100011101011"
"11010000100101111011101001100111010111011110101111011101011100011010001100010100011101101100011101011"
},
/* 8*/ { BARCODE_CODABLOCKF, -1, -1, "AAAAAAAAAAAAAAAAAAAAAAAAA", 0, 6, 112, 1, "Defaults to rows 6, columns 10 (5 data); verified manually against tec-it",
"1101000010010111101110100001001101010001100010100011000101000110001010001100010100011000110110001101100011101011"
"1101000010010111101110110001001001010001100010100011000101000110001010001100010100011000110010011101100011101011"
"1101000010010111101110101100111001010001100010100011000101000110001010001100010100011000110011101001100011101011"
"1101000010010111101110100110111001010001100010100011000101000110001010001100010100011000111010011001100011101011"
"1101000010010111101110100110011101010001100010100011000101000110001010001100010100011000111001001101100011101011"
"1101000010010111101110101110011001011101111010111101110101110111101110100011010100001100110001010001100011101011"
},
/* 9*/ { BARCODE_CODABLOCKF, 4, -1, "CODABLOCK F 34567890123456789010040digit", 0, 4, 145, 1, "AIM ISS-X-24 Figure 1",
"1101000010010111101110100100001101000100011010001110110101100010001010001100010001011000100011011101000111011010001000110110110011001100011101011"
"1101000010010111101110110001001001011000111011011001100100011000101101100110010111011110100010110001110001011011000010100101100111001100011101011"
"1101000010010111011110100011011101101111011010110011100100010110001110001011011000010100110111101101100100010010010001100100011000101100011101011"
"1101000010010111101110100110111001001110110010000100110100001101001001101000010000110100100111101001101110111010111000110110010000101100011101011"
},
/* 10*/ { BARCODE_CODABLOCKF, 3, -1, "CODABLOCK F Symbology", 0, 3, 145, 1, "AIM ISS-X-24 Figure on front page",
"1101000010010111101110100101100001000100011010001110110101100010001010001100010001011000100011011101000111011010001000110111010111101100011101011"
"1101000010010111101110110001001001011000111011011001100100011000101101100110011011101000110110111101111011101010010000110100100111101100011101011"
"1101000010010111101110101100111001000111101011001010000100011110101001101000011011011110101110111101000011001011011101110101001111001100011101011"
},
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
/* 11*/ { BARCODE_CODABLOCKF, -1, -1, " !\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~", 0, 11, 156, 1, "Visible ASCII",
"110100001001011110111010000110100110110011001100110110011001100110100100110001001000110010001001100100110010001001100010010001100100101100011101100011101011"
"110100001001011110111011000100100110010010001100100010011000100100101100111001001101110010011001110101110011001001110110010011100110100001100101100011101011"
"110100001001011101111010001101110111011011101011101100010000101100110110111101011110111011100100110111011001001110011010011100110010100001001101100011101011"
"110100001001011110111010011011100110110110001101100011011000110110101000110001000101100010001000110101100010001000110100010001100010111100010101100011101011"
"110100001001011110111010011001110110100010001100010100011000100010101101110001011000111010001101110101110110001011100011010001110110100110111001100011101011"
"110100001001011110111010111001100111011101101101000111011000101110110111010001101110001011011101110111010110001110100011011100010110100001011001100011101011"
"110100001001011110111011100100110111011010001110110001011100011010111011110101100100001011110001010101001100001010000110010010110000100011000101100011101011"
"110100001001011110111011101100100100100001101000010110010000100110101100100001011000010010011010000100110000101000011010010000110010101011110001100011101011"
"110100001001011110111011100110100110000100101100101000011110111010110000101001000111101010100111100100101111001001001111010111100100101100011101100011101011"
"110100001001011110111011100110010100111101001001111001011110100100111100101001111001001011011011110110111101101111011011010101111000111101010001100011101011"
"110100001001011110111011011011000101000111101000101111010111011110101111011101011101111010111101110101110111101011100011011101101110101001100001100011101011"
},
/* 12*/ { BARCODE_HIBC_BLOCKF, 3, -1, "A123BJC5D6E71", 0, 3, 123, 0, "Verified manually against tec-it; differs from BWIPP (columns=6) which uses Code C for final 71 (same no. of codewords)",
"110100001001011110111010010110000110001001001010001100010011100110110011100101100101110010001011000100100001101100011101011"
"110100001001011110111011000100100101101110001000100011011011100100101100010001100111010010001101000111001001101100011101011"
"110100001001011110111010110011100111011011101001110011011010001000101110111101011100011011001110100100100110001100011101011"
},
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
/* 13*/ { BARCODE_HIBC_BLOCKF, -1, -1, "$$52001510X3G", 0, 4, 101, 1, "tec-it differs as adds unnecessary Code C at end of 1st line",
"11010000100101111011101001000011011000100100100100011001001000110011011100100101110011001100011101011"
"11010000100101110111101011000111011001001110110011011001101110100010111101110100001100101100011101011"
"11010000100101111011101011001110010011101100111000101101100101110011010001000100100011001100011101011"
"11010000100101111011101001101110010110001000101110111101101000111011000110110100011010001100011101011"
},
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
char escaped[1024];
char cmp_buf[8192];
char cmp_msg[1024];
int do_bwipp = (debug & ZINT_DEBUG_TEST_BWIPP) && testUtilHaveGhostscript(); /* Only do BWIPP test if asked, too slow otherwise */
int do_zxingcpp = (debug & ZINT_DEBUG_TEST_ZXINGCPP) && testUtilHaveZXingCPPDecoder(); /* Only do ZXing-C++ test if asked, too slow otherwise */
testStartSymbol("test_encode", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, data[i].symbology, UNICODE_MODE, -1 /*eci*/, data[i].option_1, data[i].option_2, -1, -1 /*output_options*/, data[i].data, -1, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
if (p_ctx->generate) {
printf(" /*%3d*/ { %s, %d, %d, \"%s\", %s, %d, %d, %d, \"%s\",\n",
i, testUtilBarcodeName(data[i].symbology), data[i].option_1, data[i].option_2, testUtilEscape(data[i].data, length, escaped, sizeof(escaped)),
testUtilErrorName(data[i].ret), symbol->rows, symbol->width, data[i].bwipp_cmp, data[i].comment);
testUtilModulesPrint(symbol, " ", "\n");
printf(" },\n");
} else {
if (ret < ZINT_ERROR) {
int width, row;
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d (%s)\n", i, symbol->rows, data[i].expected_rows, data[i].data);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d (%s)\n", i, symbol->width, data[i].expected_width, data[i].data);
ret = testUtilModulesCmp(symbol, data[i].expected, &width, &row);
assert_zero(ret, "i:%d testUtilModulesCmp ret %d != 0 width %d row %d (%s)\n", i, ret, width, row, data[i].data);
if (do_bwipp && testUtilCanBwipp(i, symbol, data[i].option_1, data[i].option_2, -1, debug)) {
if (!data[i].bwipp_cmp) {
if (debug & ZINT_DEBUG_TEST_PRINT) printf("i:%d %s not BWIPP compatible (%s)\n", i, testUtilBarcodeName(symbol->symbology), data[i].comment);
} else {
ret = testUtilBwipp(i, symbol, data[i].option_1, data[i].option_2, -1, data[i].data, length, NULL, cmp_buf, sizeof(cmp_buf), NULL);
assert_zero(ret, "i:%d %s testUtilBwipp ret %d != 0\n", i, testUtilBarcodeName(symbol->symbology), ret);
ret = testUtilBwippCmp(symbol, cmp_msg, cmp_buf, data[i].expected);
assert_zero(ret, "i:%d %s testUtilBwippCmp %d != 0 %s\n actual: %s\nexpected: %s\n",
i, testUtilBarcodeName(symbol->symbology), ret, cmp_msg, cmp_buf, data[i].expected);
}
}
if (do_zxingcpp && testUtilCanZXingCPP(i, symbol, data[i].data, length, debug)) {
int cmp_len, ret_len;
char modules_dump[4096];
assert_notequal(testUtilModulesDump(symbol, modules_dump, sizeof(modules_dump)), -1, "i:%d testUtilModulesDump == -1\n", i);
ret = testUtilZXingCPP(i, symbol, data[i].data, length, modules_dump, cmp_buf, sizeof(cmp_buf), &cmp_len);
assert_zero(ret, "i:%d %s testUtilZXingCPP ret %d != 0\n", i, testUtilBarcodeName(symbol->symbology), ret);
ret = testUtilZXingCPPCmp(symbol, cmp_msg, cmp_buf, cmp_len, data[i].data, length, NULL /*primary*/, escaped, &ret_len);
assert_zero(ret, "i:%d %s testUtilZXingCPPCmp %d != 0 %s\n actual: %.*s\nexpected: %.*s\n",
i, testUtilBarcodeName(symbol->symbology), ret, cmp_msg, cmp_len, cmp_buf, ret_len, escaped);
}
}
}
ZBarcode_Delete(symbol);
}
testFinish();
}
/* #181 Christian Hartlage OSS-Fuzz and #300 Andre Maute */
static void test_fuzz(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
2020-03-26 08:33:20 +13:00
struct item {
int option_1;
int option_2;
char *data;
2020-03-26 08:33:20 +13:00
int length;
int ret;
int bwipp_cmp;
char *comment;
2020-03-26 08:33:20 +13:00
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { -1, -1, "\034\034I", 3, 0, 1, "" },
/* 1*/ { 6, -2147483647 - 1 /*Suppress MSVC warning C4146*/,
"\134\000\377\153\143\163\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061"
"\071\065\062\000\000\000\000\061\061\061\061\061\061\366\366\366\366\366\366\366\366\366\366\007\366\366\366\366\366\366\366\061\061\061\061\061\061\061\061\061"
"\061\061\061\061\061\061\061\323\323\323\323\000\200\135\000\362\000\000\000\000\000\050\000\000\000\000\162\162\162\162\034\153\143\163\061\061\061\061\061\061"
"\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\312\061\061\061\061\061\061\061"
"\061\366\366\366\366\366\366\366\366\366\366\007\366\366\366\366\366\366\366\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\061\323\323\323\323\000"
"\200\135\000\362\362\362\362\000\167\027\000\000\000\000\000\000\000\000\000\167\167\167\167\000\000\000\154\000\043\000\000\000\000\000\000\000\000\153",
238, 0, 0, "BWIPP different (better) encodation"
}, /* #300 (#9) Andre Maute */
2020-03-26 08:33:20 +13:00
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
char escaped[16834];
char cmp_buf[32768];
char cmp_msg[32768];
int do_bwipp = (debug & ZINT_DEBUG_TEST_BWIPP) && testUtilHaveGhostscript(); /* Only do BWIPP test if asked, too slow otherwise */
int do_zxingcpp = (debug & ZINT_DEBUG_TEST_ZXINGCPP) && testUtilHaveZXingCPPDecoder(); /* Only do ZXing-C++ test if asked, too slow otherwise */
testStartSymbol("test_fuzz", &symbol);
2020-03-26 08:33:20 +13:00
for (i = 0; i < data_size; i++) {
2020-03-26 08:33:20 +13:00
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
2020-03-26 08:33:20 +13:00
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, BARCODE_CODABLOCKF, -1 /*input_mode*/, -1 /*eci*/, data[i].option_1, data[i].option_2, -1, -1 /*output_options*/, data[i].data, data[i].length, debug);
2020-03-26 08:33:20 +13:00
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
2020-03-26 08:33:20 +13:00
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
if (ret < ZINT_ERROR) {
if (do_bwipp && testUtilCanBwipp(i, symbol, data[i].option_1, data[i].option_2, -1, debug)) {
if (!data[i].bwipp_cmp) {
if (debug & ZINT_DEBUG_TEST_PRINT) printf("i:%d %s not BWIPP compatible (%s)\n", i, testUtilBarcodeName(symbol->symbology), data[i].comment);
} else {
char modules_dump[32768];
assert_notequal(testUtilModulesDump(symbol, modules_dump, sizeof(modules_dump)), -1, "i:%d testUtilModulesDump == -1\n", i);
ret = testUtilBwipp(i, symbol, data[i].option_1, data[i].option_2, -1, data[i].data, length, NULL, cmp_buf, sizeof(cmp_buf), NULL);
assert_zero(ret, "i:%d %s testUtilBwipp ret %d != 0\n", i, testUtilBarcodeName(symbol->symbology), ret);
ret = testUtilBwippCmp(symbol, cmp_msg, cmp_buf, modules_dump);
assert_zero(ret, "i:%d %s testUtilBwippCmp %d != 0 %s\n actual: %s\nexpected: %s\n",
i, testUtilBarcodeName(symbol->symbology), ret, cmp_msg, cmp_buf, modules_dump);
}
}
if (do_zxingcpp && testUtilCanZXingCPP(i, symbol, data[i].data, length, debug)) {
int cmp_len, ret_len;
char modules_dump[32768];
assert_notequal(testUtilModulesDump(symbol, modules_dump, sizeof(modules_dump)), -1, "i:%d testUtilModulesDump == -1\n", i);
ret = testUtilZXingCPP(i, symbol, data[i].data, length, modules_dump, cmp_buf, sizeof(cmp_buf), &cmp_len);
assert_zero(ret, "i:%d %s testUtilZXingCPP ret %d != 0\n", i, testUtilBarcodeName(symbol->symbology), ret);
ret = testUtilZXingCPPCmp(symbol, cmp_msg, cmp_buf, cmp_len, data[i].data, length, NULL /*primary*/, escaped, &ret_len);
assert_zero(ret, "i:%d %s testUtilZXingCPPCmp %d != 0 %s\n actual: %.*s\nexpected: %.*s\n",
i, testUtilBarcodeName(symbol->symbology), ret, cmp_msg, cmp_len, cmp_buf, ret_len, escaped);
}
}
2020-03-26 08:33:20 +13:00
ZBarcode_Delete(symbol);
}
testFinish();
}
int main(int argc, char *argv[]) {
testFunction funcs[] = { /* name, func */
{ "test_large", test_large },
{ "test_options", test_options },
{ "test_reader_init", test_reader_init },
{ "test_input", test_input },
{ "test_encode", test_encode },
{ "test_fuzz", test_fuzz },
};
testRun(argc, argv, funcs, ARRAY_SIZE(funcs));
2020-03-26 08:33:20 +13:00
testReport();
return 0;
}
/* vim: set ts=4 sw=4 et : */