zint/backend/tests/test_telepen.c

422 lines
21 KiB
C
Raw Permalink Normal View History

/*
libzint - the open source barcode library
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
Copyright (C) 2020-2024 Robin Stuart <rstuart114@gmail.com>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
#include "testcommon.h"
static void test_large(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
char *pattern;
int length;
int ret;
int expected_rows;
int expected_width;
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
char *expected_errtxt;
};
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_TELEPEN, "\177", 69, 0, 1, 1152, "" },
/* 1*/ { BARCODE_TELEPEN, "\177", 70, ZINT_ERROR_TOO_LONG, -1, -1, "Error 390: Input length 70 too long (maximum 69)" },
/* 2*/ { BARCODE_TELEPEN_NUM, "1", 136, 0, 1, 1136, "" },
/* 3*/ { BARCODE_TELEPEN_NUM, "1", 137, ZINT_ERROR_TOO_LONG, -1, -1, "Error 392: Input length 137 too long (maximum 136)" },
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
char data_buf[256];
testStartSymbol("test_large", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
testUtilStrCpyRepeat(data_buf, data[i].pattern, data[i].length);
assert_equal(data[i].length, (int) strlen(data_buf), "i:%d length %d != strlen(data_buf) %d\n", i, data[i].length, (int) strlen(data_buf));
length = testUtilSetSymbol(symbol, data[i].symbology, -1 /*input_mode*/, -1 /*eci*/, -1 /*option_1*/, -1, -1, -1 /*output_options*/, data_buf, data[i].length, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data_buf, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
assert_equal(symbol->errtxt[0] == '\0', ret == 0, "i:%d symbol->errtxt not %s (%s)\n", i, ret ? "set" : "empty", symbol->errtxt);
assert_zero(strcmp(symbol->errtxt, data[i].expected_errtxt), "i:%d strcmp(%s, %s) != 0\n", i, symbol->errtxt, data[i].expected_errtxt);
if (ret < ZINT_ERROR) {
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d\n", i, symbol->rows, data[i].expected_rows);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d\n", i, symbol->width, data[i].expected_width);
}
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_hrt(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
char *data;
int length;
char *expected;
};
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_TELEPEN, "ABC1234.;$", -1, "ABC1234.;$" },
/* 1*/ { BARCODE_TELEPEN, "abc1234.;$", -1, "abc1234.;$" },
/* 2*/ { BARCODE_TELEPEN, "ABC1234\001", -1, "ABC1234\001" },
/* 3*/ { BARCODE_TELEPEN, "ABC\0001234", 8, "ABC 1234" },
/* 4*/ { BARCODE_TELEPEN_NUM, "1234", -1, "1234" },
/* 5*/ { BARCODE_TELEPEN_NUM, "123X", -1, "123X" },
/* 6*/ { BARCODE_TELEPEN_NUM, "123x", -1, "123X" }, /* Converts to upper */
/* 7*/ { BARCODE_TELEPEN_NUM, "12345", -1, "012345" }, /* Adds leading zero if odd */
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
testStartSymbol("test_hrt", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, data[i].symbology, -1 /*input_mode*/, -1 /*eci*/, -1 /*option_1*/, -1, -1, -1 /*output_options*/, data[i].data, data[i].length, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_zero(ret, "i:%d ZBarcode_Encode ret %d != 0 %s\n", i, ret, symbol->errtxt);
assert_zero(strcmp((char *) symbol->text, data[i].expected), "i:%d strcmp(%s, %s) != 0\n", i, symbol->text, data[i].expected);
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_input(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
char *data;
int length;
int ret;
int expected_rows;
int expected_width;
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
char *expected_errtxt;
};
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_TELEPEN, " !\"#$%&'()*+,-./0123456789:;<", -1, 0, 1, 512, "" },
/* 1*/ { BARCODE_TELEPEN, "AZaz\176\001", -1, 0, 1, 144, "" },
/* 2*/ { BARCODE_TELEPEN, "\000\177", 2, 0, 1, 80, "" },
/* 3*/ { BARCODE_TELEPEN, "é", -1, ZINT_ERROR_INVALID_DATA, -1, -1, "Error 391: Invalid character at position 1 in input, extended ASCII not allowed" },
/* 4*/ { BARCODE_TELEPEN_NUM, "1234567890", -1, 0, 1, 128, "" },
/* 5*/ { BARCODE_TELEPEN_NUM, "123456789A", -1, ZINT_ERROR_INVALID_DATA, -1, -1, "Error 393: Invalid character at position 10 in input (digits and \"X\" only)" },
/* 6*/ { BARCODE_TELEPEN_NUM, "123456789X", -1, 0, 1, 128, "" }, /* [0-9]X allowed */
/* 7*/ { BARCODE_TELEPEN_NUM, "12345678X9", -1, ZINT_ERROR_INVALID_DATA, -1, -1, "Error 394: Invalid odd position 9 of \"X\" in Telepen data" }, /* X[0-9] not allowed */
/* 8*/ { BARCODE_TELEPEN_NUM, "1X34567X9X", -1, 0, 1, 128, "" }, /* [0-9]X allowed multiple times */
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
testStartSymbol("test_input", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, data[i].symbology, -1 /*input_mode*/, -1 /*eci*/, -1 /*option_1*/, -1, -1, -1 /*output_options*/, data[i].data, data[i].length, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
assert_equal(symbol->errtxt[0] == '\0', ret == 0, "i:%d symbol->errtxt not %s (%s)\n", i, ret ? "set" : "empty", symbol->errtxt);
assert_zero(strcmp(symbol->errtxt, data[i].expected_errtxt), "i:%d strcmp(%s, %s) != 0\n", i, symbol->errtxt, data[i].expected_errtxt);
if (ret < ZINT_ERROR) {
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d\n", i, symbol->rows, data[i].expected_rows);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d\n", i, symbol->width, data[i].expected_width);
}
ZBarcode_Delete(symbol);
}
testFinish();
}
/* Telepen Barcode Symbology information and History (BSiH)
https://telepen.co.uk/wp-content/uploads/2018/10/Barcode-Symbology-information-and-History.pdf */
/* E2326U: SB Telepen Barcode Fonts Guide Issue 2 (Apr 2009)
https://telepen.co.uk/wp-content/uploads/2018/09/SB-Telepen-Barcode-Fonts-V2.pdf */
static void test_encode(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
char *data;
int length;
int ret;
int expected_rows;
int expected_width;
char *comment;
char *expected;
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_TELEPEN, "1A", -1, 0, 1, 80, "Telepen BSiH Example, same",
"10101010101110001011101000100010101110111011100010100010001110101110001010101010"
},
/* 1*/ { BARCODE_TELEPEN, "ABC", -1, 0, 1, 96, "Telepen E2326U Example, same",
"101010101011100010111011101110001110001110111000101011101110101011101000101000101110001010101010"
},
/* 2*/ { BARCODE_TELEPEN, "RST", -1, 0, 1, 96, "Verified manually against tec-it",
"101010101011100011100011100010101010111010111000111010111000101010111000111011101110001010101010"
},
/* 3*/ { BARCODE_TELEPEN, "?@", -1, 0, 1, 80, "ASCII count 127, check 0; verified manually against tec-it",
"10101010101110001010101010101110111011101110101011101110111011101110001010101010"
},
/* 4*/ { BARCODE_TELEPEN, "\000", 1, 0, 1, 64, "Verified manually against tec-it",
"1010101010111000111011101110111011101110111011101110001010101010"
},
/* 5*/ { BARCODE_TELEPEN_NUM, "1234567890", -1, 0, 1, 128, "Verified manually against tec-it",
"10101010101110001010101110101110101000101010001010101110101110001011101010001000101110001010101010101011101010101110001010101010"
},
/* 6*/ { BARCODE_TELEPEN_NUM, "123456789", -1, 0, 1, 128, "Verified manually against tec-it (012345679)",
"10101010101110001110101010111010111000100010001011101110001110001000101010001010111010100010100010111000101110101110001010101010"
},
/* 7*/ { BARCODE_TELEPEN_NUM, "123X", -1, 0, 1, 80, "Verified manually against tec-it",
"10101010101110001010101110101110111010111000111011101011101110001110001010101010"
},
/* 8*/ { BARCODE_TELEPEN_NUM, "1X3X", -1, 0, 1, 80, "Verified manually against tec-it",
"10101010101110001110001110001110111010111000111010111010101110001110001010101010"
},
/* 9*/ { BARCODE_TELEPEN_NUM, "3637", -1, 0, 1, 80, "Glyph count 127, check 0; verified manually against tec-it",
"10101010101110001010101010101110111011101110101011101110111011101110001010101010"
},
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
char escaped[1024];
char bwipp_buf[8192];
char bwipp_msg[1024];
int do_bwipp = (debug & ZINT_DEBUG_TEST_BWIPP) && testUtilHaveGhostscript(); /* Only do BWIPP test if asked, too slow otherwise */
testStartSymbol("test_encode", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, data[i].symbology, -1 /*input_mode*/, -1 /*eci*/, -1 /*option_1*/, -1, -1, -1 /*output_options*/, data[i].data, data[i].length, debug);
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
if (p_ctx->generate) {
printf(" /*%3d*/ { %s, \"%s\", %d, %s, %d, %d, \"%s\",\n",
i, testUtilBarcodeName(data[i].symbology), testUtilEscape(data[i].data, length, escaped, sizeof(escaped)), data[i].length,
testUtilErrorName(data[i].ret), symbol->rows, symbol->width, data[i].comment);
testUtilModulesPrint(symbol, " ", "\n");
printf(" },\n");
} else {
if (ret < ZINT_ERROR) {
int width, row;
assert_equal(symbol->rows, data[i].expected_rows, "i:%d symbol->rows %d != %d (%s)\n", i, symbol->rows, data[i].expected_rows, data[i].data);
assert_equal(symbol->width, data[i].expected_width, "i:%d symbol->width %d != %d (%s)\n", i, symbol->width, data[i].expected_width, data[i].data);
ret = testUtilModulesCmp(symbol, data[i].expected, &width, &row);
assert_zero(ret, "i:%d testUtilModulesCmp ret %d != 0 width %d row %d (%s)\n", i, ret, width, row, data[i].data);
if (do_bwipp && testUtilCanBwipp(i, symbol, -1, -1, -1, debug)) {
ret = testUtilBwipp(i, symbol, -1, -1, -1, data[i].data, length, NULL, bwipp_buf, sizeof(bwipp_buf), NULL);
assert_zero(ret, "i:%d %s testUtilBwipp ret %d != 0\n", i, testUtilBarcodeName(symbol->symbology), ret);
ret = testUtilBwippCmp(symbol, bwipp_msg, bwipp_buf, data[i].expected);
assert_zero(ret, "i:%d %s testUtilBwippCmp %d != 0 %s\n actual: %s\nexpected: %s\n",
i, testUtilBarcodeName(symbol->symbology), ret, bwipp_msg, bwipp_buf, data[i].expected);
}
}
}
ZBarcode_Delete(symbol);
}
testFinish();
}
/* #181 Nico Gunkel OSS-Fuzz */
static void test_fuzz(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
char *data;
int length;
int ret;
};
/* Note NULs where using DELs code (16 binary characters wide) */
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_TELEPEN, "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000", 69, 0 },
/* 1*/ { BARCODE_TELEPEN, "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000", 70, ZINT_ERROR_TOO_LONG },
/* 2*/ { BARCODE_TELEPEN_NUM, "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000", 70, ZINT_ERROR_INVALID_DATA },
/* 3*/ { BARCODE_TELEPEN_NUM, "0404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404040404", 136, 0 },
/* 4*/ { BARCODE_TELEPEN_NUM, "12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567", 137, ZINT_ERROR_TOO_LONG },
/* 5*/ { BARCODE_TELEPEN_NUM, "000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000X", 136, 0 },
/* 6*/ { BARCODE_TELEPEN_NUM, "9999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999", 136, 0 },
/* 7*/ { BARCODE_TELEPEN_NUM, "12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890", 4, 0 }, /* Length given, strlen > 137, so pseudo not NUL-terminated */
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
struct zint_symbol *symbol = NULL;
testStartSymbol("test_fuzz", &symbol);
for (i = 0; i < data_size; i++) {
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
symbol->symbology = data[i].symbology;
symbol->debug |= debug;
length = data[i].length == -1 ? (int) strlen(data[i].data) : data[i].length;
ret = ZBarcode_Encode(symbol, (unsigned char *) data[i].data, length);
assert_equal(ret, data[i].ret, "i:%d ZBarcode_Encode ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
ZBarcode_Delete(symbol);
}
testFinish();
}
static const char TeleTable[128][16] = {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
{ "31313131" }, { "1131313111" }, { "33313111" }, { "1111313131" },
{ "3111313111" }, { "11333131" }, { "13133131" }, { "111111313111" },
{ "31333111" }, { "1131113131" }, { "33113131" }, { "1111333111" },
{ "3111113131" }, { "1113133111" }, { "1311133111" }, { "111111113131" },
{ "3131113111" }, { "11313331" }, { "333331" }, { "111131113111" },
{ "31113331" }, { "1133113111" }, { "1313113111" }, { "1111113331" },
{ "31131331" }, { "113111113111" }, { "3311113111" }, { "1111131331" },
{ "311111113111" }, { "1113111331" }, { "1311111331" }, { "11111111113111" },
{ "31313311" }, { "1131311131" }, { "33311131" }, { "1111313311" },
{ "3111311131" }, { "11333311" }, { "13133311" }, { "111111311131" },
{ "31331131" }, { "1131113311" }, { "33113311" }, { "1111331131" },
{ "3111113311" }, { "1113131131" }, { "1311131131" }, { "111111113311" },
{ "3131111131" }, { "1131131311" }, { "33131311" }, { "111131111131" },
{ "3111131311" }, { "1133111131" }, { "1313111131" }, { "111111131311" },
{ "3113111311" }, { "113111111131" }, { "3311111131" }, { "111113111311" },
{ "311111111131" }, { "111311111311" }, { "131111111311" }, { "11111111111131" },
{ "3131311111" }, { "11313133" }, { "333133" }, { "111131311111" },
{ "31113133" }, { "1133311111" }, { "1313311111" }, { "1111113133" },
{ "313333" }, { "113111311111" }, { "3311311111" }, { "11113333" },
{ "311111311111" }, { "11131333" }, { "13111333" }, { "11111111311111" },
{ "31311133" }, { "1131331111" }, { "33331111" }, { "1111311133" },
{ "3111331111" }, { "11331133" }, { "13131133" }, { "111111331111" },
{ "3113131111" }, { "1131111133" }, { "33111133" }, { "111113131111" },
{ "3111111133" }, { "111311131111" }, { "131111131111" }, { "111111111133" },
{ "31311313" }, { "113131111111" }, { "3331111111" }, { "1111311313" },
{ "311131111111" }, { "11331313" }, { "13131313" }, { "11111131111111" },
{ "3133111111" }, { "1131111313" }, { "33111313" }, { "111133111111" },
{ "3111111313" }, { "111313111111" }, { "131113111111" }, { "111111111313" },
{ "313111111111" }, { "1131131113" }, { "33131113" }, { "11113111111111" },
{ "3111131113" }, { "113311111111" }, { "131311111111" }, { "111111131113" },
{ "3113111113" }, { "11311111111111" }, { "331111111111" }, { "111113111113" },
{ "31111111111111" }, { "111311111113" }, { "131111111113" },
{'1','1','1','1','1','1','1','1','1','1','1','1','1','1','1','1'},
};
/* Dummy to generate lengths table */
static void test_generate_lens(const testCtx *const p_ctx) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
int i;
if (!p_ctx->generate) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
return;
}
printf("static const char TeleLens[128] = {");
for (i = 0; i < 127; i++) {
if ((i % 16) == 0) {
printf("\n %2d,", (int) strlen(TeleTable[i]));
} else {
printf(" %2d,", (int) strlen(TeleTable[i]));
}
}
printf(" 16\n};\n");
}
int main(int argc, char *argv[]) {
testFunction funcs[] = { /* name, func */
{ "test_large", test_large },
{ "test_hrt", test_hrt },
{ "test_input", test_input },
{ "test_encode", test_encode },
{ "test_fuzz", test_fuzz },
{ "test_generate_lens", test_generate_lens },
};
testRun(argc, argv, funcs, ARRAY_SIZE(funcs));
testReport();
return 0;
}
/* vim: set ts=4 sw=4 et : */