zint/backend/tests/test_tif.c

387 lines
19 KiB
C
Raw Permalink Normal View History

/*
libzint - the open source barcode library
Copyright (C) 2020-2023 Robin Stuart <rstuart114@gmail.com>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
#include "testcommon.h"
#include <sys/stat.h>
INTERNAL int tif_pixel_plot(struct zint_symbol *symbol, unsigned char *pixelbuf);
/* For overview when debugging: ./test_tiff -f pixel_plot -d 5 */
static void test_pixel_plot(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int width;
int height;
char *pattern;
int repeat;
int no_identify; /* identify fails for some valid TIFFs (eg. RGB with LZW and large rows) */
int ret;
};
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { 1, 1, "1", 0, 0, 0 },
/* 1*/ { 2, 1, "11", 0, 0, 0 },
/* 2*/ { 1, 2, "11", 0, 0, 0 },
/* 3*/ { 2, 2, "10", 1, 0, 0 },
/* 4*/ { 3, 1, "101", 0, 0, 0 },
/* 5*/ { 1, 3, "101", 0, 0, 0 },
/* 6*/ { 4, 1, "1010", 0, 0, 0 },
/* 7*/ { 1, 4, "1010", 0, 0, 0 },
/* 8*/ { 5, 1, "10101", 0, 0, 0 },
/* 9*/ { 1, 5, "10101", 0, 0, 0 },
/* 10*/ { 3, 2, "101", 1, 0, 0 },
/* 11*/ { 100, 2, "10", 1, 0, 0 },
/* 12*/ { 2, 100, "10", 1, 0, 0 },
/* 13*/ { 3, 3, "101010101", 0, 0, 0 },
/* 14*/ { 4, 3, "10", 1, 0, 0 },
/* 15*/ { 3, 4, "10", 1, 0, 0 },
/* 16*/ { 45, 44, "10", 1, 0, 0 }, /* Strip Count 1, Rows Per Strip 44 (45 * 44 * 4 == 7920) */
/* 17*/ { 45, 45, "10", 1, 0, 0 }, /* Strip Count 1, Rows Per Strip 45 (45 * 45 * 4 == 8100) */
/* 18*/ { 46, 45, "10", 1, 0, 0 }, /* Strip Count 2, Rows Per Strip 44 (46 * 45 * 4 == 8280) */
/* 19*/ { 46, 46, "10", 1, 0, 0 }, /* Strip Count 2, Rows Per Strip 44 */
/* 20*/ { 2048, 1, "10", 1, 1, 0 }, /* Strip Count 1, Rows Per Strip 1 (2048 * 4 == 8192) */
/* 21*/ { 1, 2048, "10", 1, 0, 0 }, /* Strip Count 1, Rows Per Strip 2048 */
/* 22*/ { 2048, 2, "10", 1, 1, 0 }, /* Strip Count 2, Rows Per Strip 1 */
/* 23*/ { 2, 2048, "10", 1, 0, 0 }, /* Strip Count 2, Rows Per Strip 1024 (2 * 1024 * 4 == 8192) */
/* 24*/ { 2048, 3, "10", 1, 1, 0 }, /* Strip Count 3, Rows Per Strip 1 */
/* 25*/ { 3, 2048, "10", 1, 0, 0 }, /* Strip Count 4, Rows Per Strip 682 ((3 * 682 + 2) * 4 == 8192) */
/* 26*/ { 2049, 4, "10", 1, 1, 0 }, /* Strip Count 4, Rows Per Strip 1 (2049 * 1 * 4 == 8196) - large rows in 1 strip, even if > 8192 */
/* 27*/ { 4, 2049, "10", 1, 0, 0 }, /* Strip Count 5, Rows Per Strip 512 ((4 * 512 + 1) * 4 == 8196) */
/* 28*/ { 4096, 1, "10", 1, 1, 0 }, /* Strip Count 1, Rows Per Strip 1 */
/* 29*/ { 1, 4096, "10", 1, 0, 0 }, /* Strip Count 2, Rows Per Strip 2048 */
/* 30*/ { 4096, 2, "10", 1, 1, 0 }, /* Strip Count 2, Rows Per Strip 1 */
/* 31*/ { 2, 4096, "10", 1, 0, 0 }, /* Strip Count 4, Rows Per Strip 1024 */
/* 32*/ { 8192, 2, "10", 1, 1, 0 }, /* Strip Count 2, Rows Per Strip 1 */
/* 33*/ { 2, 8192, "10", 1, 0, 0 }, /* Strip Count 8, Rows Per Strip 1024 */
/* 34*/ { ZINT_MAX_DATA_LEN, 1, "10", 1, 1, 0 }, /* Strip Count 1, Rows Per Strip 1 */
/* 35*/ { 1, ZINT_MAX_DATA_LEN, "10", 1, 1 /*NOTE: disabled due to failing on github CI, works locally*/, 0 }, /* Strip Count 9, Rows Per Strip 2048 */
/* 36*/ { ZINT_MAX_DATA_LEN, 2, "10", 1, 1, 0 }, /* Strip Count 2, Rows Per Strip 1 */
/* 37*/ { 2, ZINT_MAX_DATA_LEN, "10", 1, 1 /*NOTE: disabled due to failing on github CI, works locally*/, 0 }, /* Strip Count 17, Rows Per Strip 1024 */
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, ret;
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-12 12:25:55 +12:00
struct zint_symbol *symbol = NULL;
char *tif = "out.tif";
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
char data_buf[ZINT_MAX_DATA_LEN * 2 + 1];
int have_tiffinfo = testUtilHaveTiffInfo();
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
const char *const have_identify = testUtilHaveIdentify();
testStart("test_pixel_plot");
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
for (i = 0; i < data_size; i++) {
int size;
if (testContinue(p_ctx, i)) continue;
strcpy(symbol->outfile, tif);
symbol->bitmap_width = data[i].width;
symbol->bitmap_height = data[i].height;
symbol->symbology = BARCODE_ULTRA; /* Use ULTRA with alpha background to force RGB */
strcpy(symbol->bgcolour, "FFFFFFEE");
symbol->debug |= debug;
size = data[i].width * data[i].height;
assert_nonzero(size < (int) sizeof(data_buf), "i:%d tif_pixel_plot size %d >= sizeof(data_buf) %d\n", i, size, (int) sizeof(data_buf));
if (data[i].repeat) {
testUtilStrCpyRepeat(data_buf, data[i].pattern, size);
} else {
strcpy(data_buf, data[i].pattern);
}
assert_equal(size, (int) strlen(data_buf), "i:%d tif_pixel_plot size %d != strlen(data_buf) %d\n", i, size, (int) strlen(data_buf));
symbol->bitmap = (unsigned char *) data_buf;
ret = tif_pixel_plot(symbol, (unsigned char *) data_buf);
assert_equal(ret, data[i].ret, "i:%d tif_pixel_plot ret %d != %d (%s)\n", i, ret, data[i].ret, symbol->errtxt);
if (ret < ZINT_ERROR) {
if (have_tiffinfo) {
ret = testUtilVerifyTiffInfo(symbol->outfile, debug);
assert_zero(ret, "i:%d tiffinfo %s ret %d != 0\n", i, symbol->outfile, ret);
} else if (have_identify && !data[i].no_identify) {
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
ret = testUtilVerifyIdentify(have_identify, symbol->outfile, debug);
assert_zero(ret, "i:%d identify %s ret %d != 0\n", i, symbol->outfile, ret);
}
if (!(debug & ZINT_DEBUG_TEST_KEEP_OUTFILE)) {
assert_zero(testUtilRemove(symbol->outfile), "i:%d testUtilRemove(%s) != 0\n", i, symbol->outfile);
}
} else {
if (!(debug & ZINT_DEBUG_TEST_KEEP_OUTFILE)) {
(void) testUtilRemove(symbol->outfile);
}
}
symbol->bitmap = NULL;
}
ZBarcode_Delete(symbol);
testFinish();
}
static void test_print(const testCtx *const p_ctx) {
int debug = p_ctx->debug;
struct item {
int symbology;
int input_mode;
int border_width;
int output_options;
int whitespace_width;
int whitespace_height;
int show_hrt;
int option_1;
int option_2;
int height;
float scale;
char *fgcolour;
char *bgcolour;
char *data;
char *composite;
char *expected_file;
char *comment;
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static const struct item data[] = {
/* 0*/ { BARCODE_CODE128, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "112233", "EEDDCC", "A", "", "code128_fgbg.tif", "" },
/* 1*/ { BARCODE_CODE128, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "FFFFFF", "000000", "A", "", "code128_reverse.tif", "" },
/* 2*/ { BARCODE_CODE128, -1, -1, CMYK_COLOUR, 1, -1, -1, -1, -1, 0, 0, "112233", "CCDDEE", "A", "", "code128_cmyk_fgbg.tif", "" },
/* 3*/ { BARCODE_CODE128, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "C00000", "FEDCBACC", "A", "", "code128_bgalpha.tif", "" },
/* 4*/ { BARCODE_CODE128, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "00000099", "FEDCBA", "A", "", "code128_fgalpha.tif", "" },
/* 5*/ { BARCODE_CODE128, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "00000099", "FEDCBACC", "A", "", "code128_fgbgalpha.tif", "" },
/* 6*/ { BARCODE_CODE128, -1, -1, CMYK_COLOUR, 1, -1, -1, -1, -1, 0, 0, "C00000", "FEDCBA", "A", "", "code128_cmyk.tif", "" },
/* 7*/ { BARCODE_CODE128, -1, -1, CMYK_COLOUR, 1, -1, -1, -1, -1, 0, 0, "C0000099", "FEDCBACC", "A", "", "code128_cmyk_fgbgalpha.tif", "" },
/* 8*/ { BARCODE_CODE128, -1, -1, CMYK_COLOUR, 1, -1, -1, -1, -1, 0, 0, "71,0,40,44", "10,0,20,5", "A", "", "code128_cmyk_fgbgcmyk.tif", "" },
/* 9*/ { BARCODE_ULTRA, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "C00000", "FEDCBACC", "1234", "", "ultra_bgalpha.tif", "" },
/* 10*/ { BARCODE_ULTRA, -1, -1, CMYK_COLOUR, 1, -1, -1, -1, -1, 0, 0, "C00000", "FEDCBACC", "1234", "", "ultra_cmyk_bgalpha.tif", "" },
/* 11*/ { BARCODE_ULTRA, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "000000BB", "FEDCBA", "1234", "", "ultra_fgalpha.tif", "" },
/* 12*/ { BARCODE_ULTRA, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "000000BB", "FEDCBACC", "1234", "", "ultra_fgbgalpha.tif", "" },
/* 13*/ { BARCODE_ULTRA, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "000000BB", "", "1234", "", "ultra_fgalpha_nobg.tif", "" },
/* 14*/ { BARCODE_ULTRA, -1, -1, -1, 1, -1, -1, -1, -1, 0, 0, "", "FEDCBACC", "1234", "", "ultra_bgalpha_nofg.tif", "" },
/* 15*/ { BARCODE_ULTRA, -1, -1, -1, -1, -1, -1, -1, -1, 0, 0.5f, "", "", "1", "", "ultra_odd.tif", "" },
/* 16*/ { BARCODE_ULTRA, -1, -1, CMYK_COLOUR, 1, -1, -1, -1, -1, 0, 0, "", "", "1234", "", "ultra_cmyk.tif", "" },
/* 17*/ { BARCODE_ULTRA, -1, 1, BARCODE_BOX, 1, 1, -1, -1, -1, 0, 0, "FF0000", "0000FF", "1234", "", "ultra_fgbg_hvwsp1_box1.tif", "" },
/* 18*/ { BARCODE_HANXIN, UNICODE_MODE, -1, -1, -1, -1, -1, 4, 84, 0, 2, "", "", "1", "", "hanxin_v84_l4_scale2.tif", "" },
/* 19*/ { BARCODE_AZTEC, -1, -1, -1, -1, -1, -1, -1, 32, 0, 0, "4BE055", "", "1", "", "aztec_v32_fg.tif", "" },
/* 20*/ { BARCODE_DAFT, -1, -1, -1, -1, -1, -1, -1, -1, 8, 0.5f, "", "", "F", "", "daft_height8_scale0.5.tif", "" },
/* 21*/ { BARCODE_DAFT, -1, -1, -1, -1, -1, -1, -1, -1, 1, 0.5f, "", "", "DAFT", "", "daft_height1_scale0.5.tif", "" },
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-12 12:25:55 +12:00
/* 22*/ { BARCODE_EANX, -1, -1, -1, -1, -1, -1, -1, -1, 0, 0, "", "", "9501234", "", "ean8_gss_5.2.2.2-1.tif", "" },
/* 23*/ { BARCODE_EANX, -1, -1, EANUPC_GUARD_WHITESPACE, -1, -1, -1, -1, -1, 0, 0, "", "", "9501234", "", "ean8_gss_5.2.2.2-1_gws.tif", "" },
};
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
const int data_size = ARRAY_SIZE(data);
int i, length, ret;
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-12 12:25:55 +12:00
struct zint_symbol *symbol = NULL;
const char *data_dir = "/backend/tests/data/tif";
const char *tif = "out.tif";
char expected_file[1024];
char escaped[1024];
int escaped_size = 1024;
unsigned char filebuf[32768];
int filebuf_size;
char *text;
int have_tiffinfo = testUtilHaveTiffInfo();
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
const char *const have_identify = testUtilHaveIdentify();
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-12 12:25:55 +12:00
testStartSymbol("test_print", &symbol);
if (p_ctx->generate) {
char data_dir_path[1024];
assert_nonzero(testUtilDataPath(data_dir_path, sizeof(data_dir_path), data_dir, NULL), "testUtilDataPath(%s) == 0\n", data_dir);
if (!testUtilDirExists(data_dir_path)) {
ret = testUtilMkDir(data_dir_path);
assert_zero(ret, "testUtilMkDir(%s) ret %d != 0 (%d: %s)\n", data_dir_path, ret, errno, strerror(errno));
}
}
for (i = 0; i < data_size; i++) {
int text_length;
if (testContinue(p_ctx, i)) continue;
symbol = ZBarcode_Create();
assert_nonnull(symbol, "Symbol not created\n");
length = testUtilSetSymbol(symbol, data[i].symbology, data[i].input_mode, -1 /*eci*/, data[i].option_1, data[i].option_2, -1, data[i].output_options, data[i].data, -1, debug);
if (data[i].show_hrt != -1) {
symbol->show_hrt = data[i].show_hrt;
}
if (data[i].height) {
symbol->height = data[i].height;
}
if (data[i].scale) {
symbol->scale = data[i].scale;
}
if (data[i].border_width != -1) {
symbol->border_width = data[i].border_width;
}
if (data[i].whitespace_width != -1) {
symbol->whitespace_width = data[i].whitespace_width;
}
if (data[i].whitespace_height != -1) {
symbol->whitespace_height = data[i].whitespace_height;
}
if (*data[i].fgcolour) {
strcpy(symbol->fgcolour, data[i].fgcolour);
}
if (*data[i].bgcolour) {
strcpy(symbol->bgcolour, data[i].bgcolour);
}
if (strlen(data[i].composite)) {
text = data[i].composite;
strcpy(symbol->primary, data[i].data);
} else {
text = data[i].data;
}
text_length = (int) strlen(text);
ret = ZBarcode_Encode(symbol, (unsigned char *) text, text_length);
assert_zero(ret, "i:%d %s ZBarcode_Encode ret %d != 0 %s\n", i, testUtilBarcodeName(data[i].symbology), ret, symbol->errtxt);
strcpy(symbol->outfile, tif);
ret = ZBarcode_Print(symbol, 0);
assert_zero(ret, "i:%d %s ZBarcode_Print %s ret %d != 0\n", i, testUtilBarcodeName(data[i].symbology), symbol->outfile, ret);
assert_nonzero(testUtilDataPath(expected_file, sizeof(expected_file), data_dir, data[i].expected_file), "i:%d testUtilDataPath == 0\n", i);
if (p_ctx->generate) {
printf(" /*%3d*/ { %s, %s, %d, %s, %d, %d, %d, %d, %d, %d, %.5g, \"%s\",\"%s\", \"%s\", \"%s\", \"%s\", \"%s\" },\n",
i, testUtilBarcodeName(data[i].symbology), testUtilInputModeName(data[i].input_mode), data[i].border_width, testUtilOutputOptionsName(data[i].output_options),
data[i].whitespace_width, data[i].whitespace_height, data[i].show_hrt, data[i].option_1, data[i].option_2,
data[i].height, data[i].scale, data[i].fgcolour, data[i].bgcolour,
testUtilEscape(data[i].data, length, escaped, escaped_size), data[i].composite, data[i].expected_file, data[i].comment);
ret = testUtilRename(symbol->outfile, expected_file);
assert_zero(ret, "i:%d testUtilRename(%s, %s) ret %d != 0\n", i, symbol->outfile, expected_file, ret);
if (have_tiffinfo) {
ret = testUtilVerifyTiffInfo(expected_file, debug);
assert_zero(ret, "i:%d %s tiffinfo %s ret %d != 0\n", i, testUtilBarcodeName(data[i].symbology), expected_file, ret);
} else if (have_identify) {
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
ret = testUtilVerifyIdentify(have_identify, expected_file, debug);
assert_zero(ret, "i:%d %s identify %s ret %d != 0\n", i, testUtilBarcodeName(data[i].symbology), expected_file, ret);
}
} else {
assert_nonzero(testUtilExists(symbol->outfile), "i:%d testUtilExists(%s) == 0\n", i, symbol->outfile);
assert_nonzero(testUtilExists(expected_file), "i:%d testUtilExists(%s) == 0\n", i, expected_file);
ret = testUtilCmpBins(symbol->outfile, expected_file);
assert_zero(ret, "i:%d %s testUtilCmpBins(%s, %s) %d != 0\n", i, testUtilBarcodeName(data[i].symbology), symbol->outfile, expected_file, ret);
ret = testUtilReadFile(symbol->outfile, filebuf, sizeof(filebuf), &filebuf_size); /* For BARCODE_MEMORY_FILE */
assert_zero(ret, "i:%d %s testUtilReadFile(%s) %d != 0\n", i, testUtilBarcodeName(data[i].symbology), symbol->outfile, ret);
if (!(debug & ZINT_DEBUG_TEST_KEEP_OUTFILE)) {
assert_zero(testUtilRemove(symbol->outfile), "i:%d testUtilRemove(%s) != 0\n", i, symbol->outfile);
}
symbol->output_options |= BARCODE_MEMORY_FILE;
ret = ZBarcode_Print(symbol, 0);
assert_zero(ret, "i:%d %s ZBarcode_Print %s ret %d != 0 (%s)\n",
i, testUtilBarcodeName(data[i].symbology), symbol->outfile, ret, symbol->errtxt);
assert_nonnull(symbol->memfile, "i:%d %s memfile NULL\n", i, testUtilBarcodeName(data[i].symbology));
assert_equal(symbol->memfile_size, filebuf_size, "i:%d %s memfile_size %d != %d\n",
i, testUtilBarcodeName(data[i].symbology), symbol->memfile_size, filebuf_size);
assert_zero(memcmp(symbol->memfile, filebuf, symbol->memfile_size), "i:%d %s memcmp(memfile, filebuf) != 0\n",
i, testUtilBarcodeName(data[i].symbology));
}
ZBarcode_Delete(symbol);
}
testFinish();
}
static void test_outfile(const testCtx *const p_ctx) {
int ret;
int skip_readonly_test = 0;
struct zint_symbol symbol = {0};
unsigned char data[] = { "1" };
(void)p_ctx;
testStart("test_outfile");
symbol.symbology = BARCODE_CODE128;
symbol.bitmap = data;
symbol.bitmap_width = symbol.bitmap_height = 1;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
strcpy(symbol.outfile, "test_tif_out.tif");
#ifndef _WIN32
skip_readonly_test = getuid() == 0; /* Skip if running as root on Unix as can't create read-only file */
#endif
if (!skip_readonly_test) {
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
static char expected_errtxt[] = "672: Could not open TIF output file ("; /* Excluding OS-dependent `errno` stuff */
(void) testUtilRmROFile(symbol.outfile); /* In case lying around from previous fail */
assert_nonzero(testUtilCreateROFile(symbol.outfile), "tif_pixel_plot testUtilCreateROFile(%s) fail (%d: %s)\n", symbol.outfile, errno, strerror(errno));
ret = tif_pixel_plot(&symbol, data);
assert_equal(ret, ZINT_ERROR_FILE_ACCESS, "tif_pixel_plot ret %d != ZINT_ERROR_FILE_ACCESS (%d) (%s)\n", ret, ZINT_ERROR_FILE_ACCESS, symbol.errtxt);
assert_zero(testUtilRmROFile(symbol.outfile), "tif_pixel_plot testUtilRmROFile(%s) != 0 (%d: %s)\n", symbol.outfile, errno, strerror(errno));
CODE128: reduce extended latch cut-off from 5 to 4 for better encodation in certain cases (and no pessimizations found so far), props lyngklip (BWIPP); fix extended char latching when exactly 3 extended chars at end; count code set C (not digits) in loop deciding when to shift/latch to extended for better estimate AZTEC: return warning if ECC < 5% (due to bit-stuffing when version given); return error if > 22 layers (Zint 26) for Reader Initialisation symbol requested for better error message AZTEC/HANXIN/QRCODE: consolidate different ECC data size tables into one indexed by ECC DBAR_EXP: check for reduced length <= 77 up front for better error message HANXIN: use `malloc()` rather than `z_alloca()` for large binary array QRCODE: `ecc_level` now 0-based (not 1-based) MICROQR: consolidate different version end routines into one `microqr_end()` and use new `microqr_data` table to simplify code MICROPDF417: use table for max codewords per column library: centralize all error messages using new `errtxt()`, `errtxtf()`, `errtxt_adj()` funcs that protect `symbol->errtxt` from overflow, & try to make error messages more consistent thru-out, adding more feedback info to many, & use positional args "%n$" in prep for l10n (maybe); `is_sane/is_sane_lookup()` -> `not_sane/not_sane_lookup()`, returning 1-based position (zero on failure) instead of bool; `long` ints -> plain `int` (except those dealing with `ftell()`, `fread()` etc) as depend on int being 32-bits already GUI: in "grpDATF.ui" use "PlainText" rather than "RichText" for tracker ratio examples as height of text messing up sometimes manual: clarify Codablock-F length maximum & add examples docs: README: pandoc 3.5, Ubuntu 24.04 CMake: use "-Wpedantic" for Clang only as GNU complains about `errtxtf()` positional args "%n$"
2024-10-28 10:33:33 +13:00
assert_zero(strncmp(symbol.errtxt, expected_errtxt, sizeof(expected_errtxt) - 1), "strncmp(%s, %s) != 0\n", symbol.errtxt, expected_errtxt);
}
symbol.output_options |= BARCODE_STDOUT;
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-12 12:25:55 +12:00
printf("<<<Begin ignore (TIF to stdout)\n"); fflush(stdout);
ret = tif_pixel_plot(&symbol, data);
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-12 12:25:55 +12:00
printf("\n<<<End ignore (TIF to stdout)\n"); fflush(stdout);
assert_zero(ret, "tif_pixel_plot ret %d != 0 (%s)\n", ret, symbol.errtxt);
testFinish();
}
int main(int argc, char *argv[]) {
testFunction funcs[] = { /* name, func */
{ "test_pixel_plot", test_pixel_plot },
{ "test_print", test_print },
{ "test_outfile", test_outfile },
};
testRun(argc, argv, funcs, ARRAY_SIZE(funcs));
testReport();
return 0;
}
/* vim: set ts=4 sw=4 et : */