zint/backend/output.c

724 lines
26 KiB
C
Raw Normal View History

/* output.c - Common routines for raster/vector
libzint - the open source barcode library
Copyright (C) 2020 - 2021 Robin Stuart <rstuart114@gmail.com>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* vim: set ts=4 sw=4 et : */
#include <assert.h>
#include <math.h>
#include "common.h"
#include "output.h"
#include "font.h"
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
#define SSET_F (IS_NUM_F | IS_UHX_F) /* SSET "0123456789ABCDEF" */
/* Check colour options are good. Note: using raster.c error nos 651-654 */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
INTERNAL int out_check_colour_options(struct zint_symbol *symbol) {
int fg_len = (int) strlen(symbol->fgcolour);
int bg_len = (int) strlen(symbol->bgcolour);
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if ((fg_len != 6) && (fg_len != 8)) {
strcpy(symbol->errtxt, "651: Malformed foreground colour target");
return ZINT_ERROR_INVALID_OPTION;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if ((bg_len != 6) && (bg_len != 8)) {
strcpy(symbol->errtxt, "652: Malformed background colour target");
return ZINT_ERROR_INVALID_OPTION;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
to_upper((unsigned char *) symbol->fgcolour, fg_len);
to_upper((unsigned char *) symbol->bgcolour, bg_len);
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (!is_sane(SSET_F, (unsigned char *) symbol->fgcolour, fg_len)) {
strcpy(symbol->errtxt, "653: Malformed foreground colour target");
return ZINT_ERROR_INVALID_OPTION;
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
if (!is_sane(SSET_F, (unsigned char *) symbol->bgcolour, bg_len)) {
strcpy(symbol->errtxt, "654: Malformed background colour target");
return ZINT_ERROR_INVALID_OPTION;
}
return 0;
}
/* Return minimum quiet zones for each symbology */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
STATIC_UNLESS_ZINT_TEST int out_quiet_zones(const struct zint_symbol *symbol, const int hide_text,
float *left, float *right, float *top, float *bottom) {
int done = 0;
*left = *right = *top = *bottom = 0.0f;
/* These always have quiet zones set (previously used whitespace_width) */
switch (symbol->symbology) {
case BARCODE_CODE16K:
/* BS EN 12323:2005 Section 4.5 (c) */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = 10.0f;
*right = 1.0f;
}
done = 1;
break;
case BARCODE_CODE49:
/* ANSI/AIM BC6-2000 Section 2.4 */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = 10.0f;
*right = 1.0f;
}
done = 1;
break;
case BARCODE_CODABLOCKF:
case BARCODE_HIBC_BLOCKF:
/* AIM ISS-X-24 Section 4.6.1 */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = *right = 10.0f;
}
done = 1;
break;
case BARCODE_ITF14:
/* GS1 General Specifications 21.0.1 Section 5.3.2.2 */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = *right = 10.0f;
}
done = 1;
break;
case BARCODE_EANX:
case BARCODE_EANX_CHK:
case BARCODE_EANX_CC:
case BARCODE_ISBNX:
/* GS1 General Specifications 21.0.1 Section 5.2.3.4 */
switch (ustrlen(symbol->text)) {
case 13: /* EAN-13 */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = 11.0f;
*right = 7.0f;
} else if (!hide_text) {
*left = 11.0f; /* Need for outside left digit */
}
break;
case 16: /* EAN-13/ISBN + 2 digit addon */
case 19: /* EAN-13/ISBN + 5 digit addon */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = 11.0f;
*right = 5.0f;
} else if (!hide_text) {
*left = 11.0f; /* Need for outside left digit */
}
break;
case 5: /* EAN-5 addon */
case 2: /* EAN-2 addon */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = 7.0f;
*right = 5.0f;
}
break;
default: /* EAN-8 (+/- 2/5 digit addon) */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = *right = 7.0f;
}
break;
}
done = 1;
break;
case BARCODE_UPCA:
case BARCODE_UPCA_CHK:
case BARCODE_UPCA_CC:
/* GS1 General Specifications 21.0.1 Section 5.2.3.4 */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = 9.0f;
if (ustrlen(symbol->text) > 12) { /* UPC-A + addon */
*right = 5.0f;
} else {
*right = 9.0f;
}
} else if (!hide_text) {
*left = 9.0f; /* Need for outside left digit */
if (ustrlen(symbol->text) <= 12) { /* No addon */
*right = 9.0f; /* Need for outside right digit */
}
}
done = 1;
break;
case BARCODE_UPCE:
case BARCODE_UPCE_CHK:
case BARCODE_UPCE_CC:
/* GS1 General Specifications 21.0.1 Section 5.2.3.4 */
if (!(symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
*left = 9.0f;
if (ustrlen(symbol->text) > 8) { /* UPC-E + addon */
*right = 5.0f;
} else {
*right = 7.0f;
}
} else if (!hide_text) {
*left = 9.0f; /* Need for outside left digit */
if (ustrlen(symbol->text) <= 8) { /* No addon */
*right = 7.0f; /* Need for outside right digit */
}
}
done = 1;
break;
}
if (done) {
return done;
}
/* Only do others if flag set */
if (!(symbol->output_options & BARCODE_QUIET_ZONES) || (symbol->output_options & BARCODE_NO_QUIET_ZONES)) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
return 0;
}
switch (symbol->symbology) {
case BARCODE_CODE11:
/* No known standard. Following ITF-14, set to 10X */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_C25INTER:
/* ISO/IEC 16390:2007 Section 4.4 10X */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_C25STANDARD:
case BARCODE_C25IATA:
case BARCODE_C25LOGIC:
case BARCODE_C25IND:
/* No known standards. Following C25INTER, set to 10X */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_CODE39:
case BARCODE_EXCODE39:
case BARCODE_LOGMARS:
case BARCODE_PZN:
case BARCODE_VIN:
case BARCODE_HIBC_39:
case BARCODE_CODE32:
/* ISO/IEC 16388:2007 Section 4.4 (d) */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_GS1_128: /* GS1-128 */
case BARCODE_GS1_128_CC:
case BARCODE_EAN14:
/* GS1 General Specifications 21.0.1 Section 5.4.4.2 */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_CODABAR:
/* BS EN 798:1995 Section 4.4.1 (d) */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_CODE128:
case BARCODE_CODE128B:
case BARCODE_HIBC_128:
case BARCODE_NVE18:
/* ISO/IEC 15417:2007 4.4.2 */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_DPLEIT:
case BARCODE_DPIDENT:
/* Using CODE39 values TODO: Find doc */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_CODE93:
/* ANSI/AIM BC5-1995 Section 2.4 */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_FLAT:
/* TODO: Find doc (application defined according to TEC-IT) */
break;
case BARCODE_DBAR_OMN: /* GS1 Databar Omnidirectional */
case BARCODE_DBAR_LTD: /* GS1 Databar Limited */
case BARCODE_DBAR_EXP: /* GS1 Databar Expanded */
case BARCODE_DBAR_STK: /* GS1 DataBar Stacked */
case BARCODE_DBAR_OMNSTK: /* GS1 DataBar Stacked Omnidirectional */
case BARCODE_DBAR_EXPSTK: /* GS1 Databar Expanded Stacked */
/* GS1 General Specifications 21.0.1 Section 5.5.1.1 - Quiet Zones: None required */
done = 1;
break;
case BARCODE_DBAR_OMN_CC:
case BARCODE_DBAR_LTD_CC:
case BARCODE_DBAR_EXP_CC:
case BARCODE_DBAR_STK_CC:
case BARCODE_DBAR_OMNSTK_CC:
case BARCODE_DBAR_EXPSTK_CC:
/* GS1 General Specifications 21.0.1 Sections 5.11.2.1 (CC-A) & 5.11.2.2 (CC-B) */
*left = *right = 1.0f;
done = 1;
break;
case BARCODE_TELEPEN:
case BARCODE_TELEPEN_NUM:
/* Appears to be ~10X from diagram in Telepen Barcode Symbology information and History */
/* TODO: Find better doc */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_POSTNET:
case BARCODE_PLANET:
/* USPS DMM 300 2006 (2011) 5.7 Barcode in Address Block
left/right 0.125" / 0.025" (X max) = 5, top/bottom 0.04" / 0.025" (X max) = 1.6 */
*left = *right = 5.0f;
*top = *bottom = 1.6f;
done = 1;
break;
case BARCODE_MSI_PLESSEY:
/* TODO Find doc (TEC-IT says 12X so use that for the moment) */
*left = *right = 12.0f;
done = 1;
break;
case BARCODE_FIM:
/* USPS DMM 300 2006 (2011) 708.9.3 (top/bottom zero)
right 0.125" (min) / 0.03925" (X max) ~ 3.18, left 1.25" - 0.66725" (max width of barcode)
- 0.375 (max right) = 0.20775" / 0.03925" (X max) ~ 5.29 */
*right = (float) (0.125 / 0.03925);
*left = (float) (0.20775 / 0.03925);
done = 1;
break;
case BARCODE_PHARMA:
case BARCODE_PHARMA_TWO:
/* Laetus Pharmacode Guide 2.2 from 6mm depending on context, 6mm / 1mm (Pharma Two X) = 6 */
*left = *right = 6.0f;
done = 1;
break;
case BARCODE_PDF417:
case BARCODE_PDF417COMP:
case BARCODE_HIBC_PDF:
/* ISO/IEC 15438:2015 Section 5.8.3 */
*left = *right = *top = *bottom = 2.0f;
done = 1;
break;
case BARCODE_MICROPDF417:
case BARCODE_HIBC_MICPDF:
/* ISO/IEC 24728:2006 Section 5.8.3 */
*left = *right = *top = *bottom = 1.0f;
done = 1;
break;
case BARCODE_MAXICODE:
/* ISO/IEC 16023:2000 Section 4.11.5 */
*left = *right = *top = *bottom = 1.0f;
done = 1;
break;
case BARCODE_QRCODE:
case BARCODE_UPNQR:
case BARCODE_HIBC_QR:
/* ISO/IEC 18004:2015 Section 9.1 */
*left = *right = *top = *bottom = 4.0f;
done = 1;
break;
case BARCODE_DPD:
/* Specification DPD and primetime Parcel Despatch 4.0.2 Section 5.5.1 5mm / 0.4mm (X max) = 12.5 */
*left = *right = 12.5f;
done = 1;
break;
case BARCODE_MICROQR:
/* ISO/IEC 18004:2015 Section 9.1 */
*left = *right = *top = *bottom = 2.0f;
done = 1;
break;
case BARCODE_RMQR:
/* ISO/IEC JTC1/SC31N000 Section 6.3.10 */
*left = *right = *top = *bottom = 2.0f;
done = 1;
break;
case BARCODE_AUSPOST:
case BARCODE_AUSREPLY:
case BARCODE_AUSROUTE:
case BARCODE_AUSREDIRECT:
/* Customer Barcode Technical Specifications (2012) left/right 6mm / 0.6mm = 10,
top/bottom 2mm / 0.6mm ~ 3.33 (X max) */
*left = *right = 10.0f;
*top = *bottom = (float) (2.0 / 0.6);
done = 1;
break;
case BARCODE_RM4SCC:
/* Royal Mail Know How User's Manual Appendix C: using CBC, same as MAILMARK, 2mm all round,
use X max (25.4mm / 39) i.e. 20 bars per 25.4mm */
*left = *right = *top = *bottom = (float) ((2.0 * 39.0) / 25.4); /* ~ 3.07 */
done = 1;
break;
case BARCODE_DATAMATRIX:
case BARCODE_HIBC_DM:
/* ISO/IEC 16022:2006 Section 7.1 */
*left = *right = *top = *bottom = 1.0f;
done = 1;
break;
case BARCODE_JAPANPOST:
/* Japan Post Zip/Barcode Manual p.13 2mm all round, X 0.6mm, 2mm / 0.6mm ~ 3.33 */
*left = *right = *top = *bottom = (float) (2.0 / 0.6);
done = 1;
break;
case BARCODE_KOREAPOST:
/* TODO Find doc (TEC-IT uses 10X but says not exactly specified - do the same for the moment) */
*left = *right = 10.0f;
done = 1;
break;
case BARCODE_USPS_IMAIL:
/* USPS-B-3200 (2015) Section 2.3.2 left/right 0.125", top/bottom 0.026", use X max (1 / 39)
i.e. 20 bars per inch */
*left = *right = 0.125f * 39.0f; /* 4.875 */
*top = *bottom = 0.026f * 39.0f; /* 1.014 */
done = 1;
break;
case BARCODE_PLESSEY:
/* TODO Find doc (see MSI_PLESSEY) */
*left = *right = 12.0f;
done = 1;
break;
case BARCODE_KIX:
/* Handleiding KIX code brochure - same as RM4SCC/MAILMARK */
*left = *right = *top = *bottom = (float) ((2.0 * 39.0) / 25.4); /* ~ 3.07 */
done = 1;
break;
case BARCODE_AZTEC:
case BARCODE_HIBC_AZTEC:
case BARCODE_AZRUNE:
/* ISO/IEC 24778:2008 Section 4.1 (c) & Annex A.1 (Rune) - no quiet zone required */
done = 1;
break;
case BARCODE_DAFT:
/* Generic so unlikely to be defined */
done = 1;
break;
case BARCODE_DOTCODE:
/* ISS DotCode Rev. 4.0 Section 4.1 (3) (c) */
*left = *right = *top = *bottom = 3.0f;
done = 1;
break;
case BARCODE_HANXIN:
/* ISO/IEC DIS 20830:2019 Section 4.2.8 (also Section 6.2) */
*left = *right = *top = *bottom = 3.0f;
done = 1;
break;
case BARCODE_MAILMARK:
/* Royal Mail Mailmark Barcode Definition Document Section 3.5.2, 2mm all round, use X max (25.4mm / 39)
i.e. 20 bars per 25.4mm */
*left = *right = *top = *bottom = (float) ((2.0 * 39.0) / 25.4); /* ~ 3.07 */
done = 1;
break;
case BARCODE_CHANNEL:
/* ANSI/AIM BC12-1998 Section 4.4 (c) */
*left = 1.0f;
*right = 2.0f;
done = 1;
break;
case BARCODE_CODEONE:
/* USS Code One AIM 1994 Section 2.2.4 No quiet zone required for Versions A to H */
if (symbol->option_2 == 9 || symbol->option_2 == 10) { /* Section 2.3.2 Versions S & T */
*left = *right = 1.0f;
}
done = 1;
break;
case BARCODE_GRIDMATRIX:
/* AIMD014 (v 1.63) Section 7.1 */
*left = *right = *top = *bottom = 6.0f;
done = 1;
break;
case BARCODE_ULTRA:
/* AIMD/TSC15032-43 (v 0.99c) Section 9.2 */
*left = *right = *top = *bottom = 1.0f;
done = 1;
break;
}
return done; /* For self-checking */
}
/* Set left (x), top (y), right and bottom offsets for whitespace */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
INTERNAL void out_set_whitespace_offsets(const struct zint_symbol *symbol, const int hide_text,
float *xoffset, float *yoffset, float *roffset, float *boffset, const float scaler,
int *xoffset_si, int *yoffset_si, int *roffset_si, int *boffset_si) {
float qz_left, qz_right, qz_top, qz_bottom;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
out_quiet_zones(symbol, hide_text, &qz_left, &qz_right, &qz_top, &qz_bottom);
*xoffset = symbol->whitespace_width + qz_left;
*roffset = symbol->whitespace_width + qz_right;
if (symbol->output_options & BARCODE_BOX) {
*xoffset += symbol->border_width;
*roffset += symbol->border_width;
}
*yoffset = symbol->whitespace_height + qz_top;
*boffset = symbol->whitespace_height + qz_bottom;
if (symbol->output_options & (BARCODE_BOX | BARCODE_BIND)) {
*yoffset += symbol->border_width;
*boffset += symbol->border_width;
}
if (scaler) {
if (xoffset_si) {
*xoffset_si = (int) (*xoffset * scaler);
}
if (yoffset_si) {
*yoffset_si = (int) (*yoffset * scaler);
}
if (roffset_si) {
*roffset_si = (int) (*roffset * scaler);
}
if (boffset_si) {
*boffset_si = (int) (*boffset * scaler);
}
}
}
/* Set composite offset and main width excluding addon (for start of addon calc) and addon text, returning
UPC/EAN type */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
INTERNAL int out_process_upcean(const struct zint_symbol *symbol, int *p_main_width, int *p_comp_xoffset,
unsigned char addon[6], int *p_addon_gap) {
int main_width; /* Width of main linear symbol, excluding addon */
int comp_xoffset; /* Whitespace offset (if any) of main linear symbol due to having composite */
int upceanflag; /* UPC/EAN type flag */
int i, j, latch;
int text_length = (int) ustrlen(symbol->text);
latch = 0;
j = 0;
/* Isolate add-on text */
for (i = 6; i < text_length && j < 5; i++) {
if (latch == 1) {
addon[j] = symbol->show_hrt ? symbol->text[i] : ' '; /* Use dummy space-filled addon if no hrt */
j++;
} else if (symbol->text[i] == '+') {
latch = 1;
}
}
addon[j] = '\0';
if (latch) {
if (symbol->symbology == BARCODE_UPCA || symbol->symbology == BARCODE_UPCA_CHK
|| symbol->symbology == BARCODE_UPCA_CC) {
*p_addon_gap = symbol->option_2 >= 9 && symbol->option_2 <= 12 ? symbol->option_2 : 9;
} else {
*p_addon_gap = symbol->option_2 >= 7 && symbol->option_2 <= 12 ? symbol->option_2 : 7;
}
}
/* Calculate composite offset */
comp_xoffset = 0;
if (is_composite(symbol->symbology)) {
while (!(module_is_set(symbol, symbol->rows - 1, comp_xoffset))) {
comp_xoffset++;
}
}
upceanflag = 0;
main_width = symbol->width;
if ((symbol->symbology == BARCODE_EANX) || (symbol->symbology == BARCODE_EANX_CHK)
|| (symbol->symbology == BARCODE_EANX_CC) || (symbol->symbology == BARCODE_ISBNX)) {
switch (text_length) {
case 13: /* EAN-13 */
case 16: /* EAN-13 + EAN-2 */
case 19: /* EAN-13 + EAN-5 */
main_width = 95 + comp_xoffset; /* EAN-13 main symbol 95 modules wide */
upceanflag = 13;
break;
case 2:
/* EAN-2 can't have addon or be composite */
upceanflag = 2;
break;
case 5:
/* EAN-5 can't have addon or be composite */
upceanflag = 5;
break;
default:
main_width = 68 + comp_xoffset; /* EAN-8 main symbol 68 modules wide */
upceanflag = 8;
break;
}
} else if ((symbol->symbology == BARCODE_UPCA) || (symbol->symbology == BARCODE_UPCA_CHK)
|| (symbol->symbology == BARCODE_UPCA_CC)) {
main_width = 95 + comp_xoffset; /* UPC-A main symbol 95 modules wide */
upceanflag = 12;
} else if ((symbol->symbology == BARCODE_UPCE) || (symbol->symbology == BARCODE_UPCE_CHK)
|| (symbol->symbology == BARCODE_UPCE_CC)) {
main_width = 51 + comp_xoffset; /* UPC-E main symbol 51 modules wide */
upceanflag = 6;
}
*p_comp_xoffset = comp_xoffset;
*p_main_width = main_width;
return upceanflag;
}
/* Calculate large bar height i.e. linear bars with zero row height that respond to the symbol height.
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
If scaler `si` non-zero (raster), then large_bar_height if non-zero or else row heights will be rounded
to nearest pixel and symbol height adjusted */
INTERNAL float out_large_bar_height(struct zint_symbol *symbol, int si, int *row_heights_si, int *symbol_height_si) {
float fixed_height = 0.0f;
int zero_count = 0;
int round_rows = 0;
int i;
float large_bar_height = 0.0f; /* Not used if zero_count zero */
if (si) {
for (i = 0; i < symbol->rows; i++) {
if (symbol->row_height[i]) {
fixed_height += symbol->row_height[i];
if (!round_rows && !isfintf(symbol->row_height[i] * si)) {
round_rows = 1;
}
} else {
zero_count++;
}
}
if (zero_count) {
large_bar_height = stripf((symbol->height - fixed_height) / zero_count);
assert(large_bar_height >= 0.5f); /* Min row height as set by `set_height()` */
if (!isfintf(large_bar_height * si)) {
large_bar_height = stripf(roundf(large_bar_height * si) / si);
}
symbol->height = stripf(large_bar_height * zero_count + fixed_height);
/* Note should never happen that have both zero_count and round_rows */
} else {
if (round_rows) {
float total_height = 0.0f;
for (i = 0; i < symbol->rows; i++) {
if (!isfintf(symbol->row_height[i] * si)) {
symbol->row_height[i] = roundf(symbol->row_height[i] * si) / si;
}
total_height += symbol->row_height[i];
}
symbol->height = stripf(total_height);
}
}
if (row_heights_si) {
assert(symbol_height_si);
*symbol_height_si = 0;
for (i = 0; i < symbol->rows; i++) {
if (symbol->row_height[i]) {
row_heights_si[i] = (int) roundf(symbol->row_height[i] * si);
} else {
row_heights_si[i] = (int) roundf(large_bar_height * si);
}
*symbol_height_si += row_heights_si[i];
}
}
} else {
for (i = 0; i < symbol->rows; i++) {
if (symbol->row_height[i]) {
fixed_height += symbol->row_height[i];
} else {
zero_count++;
}
}
if (zero_count) {
large_bar_height = stripf((symbol->height - fixed_height) / zero_count);
assert(large_bar_height >= 0.5f); /* Min row height as set by `set_height()` */
symbol->height = stripf(large_bar_height * zero_count + fixed_height);
}
}
return large_bar_height;
}
/* Split UPC/EAN add-on text into various constituents */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
INTERNAL void out_upcean_split_text(int upceanflag, unsigned char text[],
unsigned char textpart1[5], unsigned char textpart2[7], unsigned char textpart3[7],
unsigned char textpart4[2]) {
int i;
if (upceanflag == 6) { /* UPC-E */
textpart1[0] = text[0];
textpart1[1] = '\0';
for (i = 0; i < 6; i++) {
textpart2[i] = text[i + 1];
}
textpart2[6] = '\0';
textpart3[0] = text[7];
textpart3[1] = '\0';
} else if (upceanflag == 8) { /* EAN-8 */
for (i = 0; i < 4; i++) {
textpart1[i] = text[i];
}
textpart1[4] = '\0';
for (i = 0; i < 4; i++) {
textpart2[i] = text[i + 4];
}
textpart2[4] = '\0';
} else if (upceanflag == 12) { /* UPC-A */
textpart1[0] = text[0];
textpart1[1] = '\0';
for (i = 0; i < 5; i++) {
textpart2[i] = text[i + 1];
}
textpart2[5] = '\0';
for (i = 0; i < 5; i++) {
textpart3[i] = text[i + 6];
}
textpart3[5] = '\0';
textpart4[0] = text[11];
textpart4[1] = '\0';
} else if (upceanflag == 13) { /* EAN-13 */
textpart1[0] = text[0];
textpart1[1] = '\0';
for (i = 0; i < 6; i++) {
textpart2[i] = text[i + 1];
}
textpart2[6] = '\0';
for (i = 0; i < 6; i++) {
textpart3[i] = text[i + 7];
}
textpart3[6] = '\0';
}
}