2019-09-02 08:09:47 +12:00
/*
libzint - the open source barcode library
2022-04-10 22:12:18 +12:00
Copyright ( C ) 2019 - 2022 Robin Stuart < rstuart114 @ gmail . com >
2019-09-02 08:09:47 +12:00
Redistribution and use in source and binary forms , with or without
modification , are permitted provided that the following conditions
are met :
1. Redistributions of source code must retain the above copyright
notice , this list of conditions and the following disclaimer .
2. Redistributions in binary form must reproduce the above copyright
notice , this list of conditions and the following disclaimer in the
documentation and / or other materials provided with the distribution .
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission .
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS " AS IS " AND
ANY EXPRESS OR IMPLIED WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED . IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT , INDIRECT , INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL
DAMAGES ( INCLUDING , BUT NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES ; LOSS OF USE , DATA , OR PROFITS ; OR BUSINESS INTERRUPTION )
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT
LIABILITY , OR TORT ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE .
*/
2022-07-20 07:56:07 +12:00
/* SPDX-License-Identifier: BSD-3-Clause */
2019-09-02 08:09:47 +12:00
# include "testcommon.h"
2022-09-13 06:26:04 +12:00
static void test_large ( const testCtx * const p_ctx ) {
int debug = p_ctx - > debug ;
2020-06-05 05:45:25 +12:00
struct item {
int option_1 ;
2020-12-20 06:13:35 +13:00
int option_2 ;
2020-10-04 10:51:08 +13:00
char * pattern ;
2020-06-05 05:45:25 +12:00
int length ;
2021-08-10 23:04:25 +12:00
char * primary ;
2020-06-05 05:45:25 +12:00
int ret ;
int expected_rows ;
int expected_width ;
} ;
2022-07-20 07:56:07 +12:00
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
2020-06-05 05:45:25 +12:00
struct item data [ ] = {
2022-07-20 07:56:07 +12:00
/* 0*/ { - 1 , - 1 , " 1 " , 138 , " " , 0 , 33 , 30 } , /* Mode 4 (138 agrees with ISO/IEC 16023:2000) */
2020-12-20 06:13:35 +13:00
/* 1*/ { - 1 , - 1 , " 1 " , 139 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
2022-07-20 07:56:07 +12:00
/* 2*/ { - 1 , - 1 , " 1 " , 145 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } , /* Absolute max */
2021-08-06 03:34:45 +12:00
/* 3*/ { - 1 , - 1 , " A " , 93 , " " , 0 , 33 , 30 } ,
/* 4*/ { - 1 , - 1 , " A " , 94 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 5*/ { - 1 , - 1 , " \001 " , 90 , " " , 0 , 33 , 30 } ,
/* 6*/ { - 1 , - 1 , " \001 " , 91 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 7*/ { - 1 , - 1 , " \200 " , 90 , " " , 0 , 33 , 30 } ,
/* 8*/ { - 1 , - 1 , " \200 " , 91 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 9*/ { 2 , - 1 , " 1 " , 126 , " 123456789123123 " , 0 , 33 , 30 } ,
/* 10*/ { 2 , - 1 , " 1 " , 127 , " 123456789123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 11*/ { 2 , - 1 , " A " , 84 , " 123456789123123 " , 0 , 33 , 30 } ,
/* 12*/ { 2 , - 1 , " A " , 85 , " 123456789123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 13*/ { 2 , 96 , " 1 " , 109 , " 123456789123123 " , 0 , 33 , 30 } ,
/* 14*/ { 2 , 96 , " 1 " , 110 , " 123456789123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
2022-07-20 07:56:07 +12:00
/* 15*/ { 2 , 96 , " 1 " , 136 , " 123456789123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } , /* Absolute max with SCM vv */
2021-08-06 03:34:45 +12:00
/* 16*/ { 3 , - 1 , " 1 " , 126 , " ABCDEF123123 " , 0 , 33 , 30 } ,
/* 17*/ { 3 , - 1 , " 1 " , 127 , " ABCDEF123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 18*/ { 3 , - 1 , " A " , 84 , " ABCDEF123123 " , 0 , 33 , 30 } ,
/* 19*/ { 3 , - 1 , " A " , 85 , " ABCDEF123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 20*/ { 3 , 96 , " 1 " , 109 , " ABCDEF123123 " , 0 , 33 , 30 } ,
/* 21*/ { 3 , 96 , " 1 " , 110 , " ABCDEF123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
2022-07-20 07:56:07 +12:00
/* 22*/ { 0 , - 1 , " 1 " , 126 , " 123456789123123 " , 0 , 33 , 30 } , /* Mode 2 */
2021-08-06 03:34:45 +12:00
/* 23*/ { 0 , - 1 , " 1 " , 127 , " 123456789123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
2022-07-20 07:56:07 +12:00
/* 24*/ { 0 , - 1 , " 1 " , 126 , " ABCDEF123123 " , 0 , 33 , 30 } , /* Mode 3 */
2021-08-06 03:34:45 +12:00
/* 25*/ { 0 , - 1 , " 1 " , 127 , " ABCDEF123123 " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
2022-07-20 07:56:07 +12:00
/* 26*/ { 5 , - 1 , " 1 " , 113 , " " , 0 , 33 , 30 } , /* Extra EEC */
2021-08-06 03:34:45 +12:00
/* 27*/ { 5 , - 1 , " 1 " , 114 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 28*/ { 5 , - 1 , " A " , 77 , " " , 0 , 33 , 30 } ,
/* 29*/ { 5 , - 1 , " A " , 78 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 30*/ { 6 , - 1 , " 1 " , 138 , " " , 0 , 33 , 30 } ,
/* 31*/ { 6 , - 1 , " 1 " , 139 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
/* 32*/ { 6 , - 1 , " A " , 93 , " " , 0 , 33 , 30 } ,
/* 33*/ { 6 , - 1 , " A " , 94 , " " , ZINT_ERROR_TOO_LONG , - 1 , - 1 } ,
2020-06-05 05:45:25 +12:00
} ;
int data_size = ARRAY_SIZE ( data ) ;
2021-06-24 02:00:49 +12:00
int i , length , ret ;
struct zint_symbol * symbol ;
2020-06-05 05:45:25 +12:00
char data_buf [ 256 ] ;
2021-06-24 02:00:49 +12:00
testStart ( " test_large " ) ;
for ( i = 0 ; i < data_size ; i + + ) {
2020-06-05 05:45:25 +12:00
2022-09-13 06:26:04 +12:00
if ( testContinue ( p_ctx , i ) ) continue ;
2020-06-05 05:45:25 +12:00
2021-06-24 02:00:49 +12:00
symbol = ZBarcode_Create ( ) ;
2020-06-05 05:45:25 +12:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
testUtilStrCpyRepeat ( data_buf , data [ i ] . pattern , data [ i ] . length ) ;
assert_equal ( data [ i ] . length , ( int ) strlen ( data_buf ) , " i:%d length %d != strlen(data_buf) %d \n " , i , data [ i ] . length , ( int ) strlen ( data_buf ) ) ;
2021-06-24 02:00:49 +12:00
length = testUtilSetSymbol ( symbol , BARCODE_MAXICODE , - 1 /*input_mode*/ , - 1 /*eci*/ , data [ i ] . option_1 , data [ i ] . option_2 , - 1 , - 1 /*output_options*/ , data_buf , data [ i ] . length , debug ) ;
2020-06-05 05:45:25 +12:00
strcpy ( symbol - > primary , data [ i ] . primary ) ;
2020-10-04 10:51:08 +13:00
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data_buf , length ) ;
2020-06-05 05:45:25 +12:00
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
2021-02-23 13:01:15 +13:00
if ( ret < ZINT_ERROR ) {
2020-06-05 05:45:25 +12:00
assert_equal ( symbol - > rows , data [ i ] . expected_rows , " i:%d symbol->rows %d != %d \n " , i , symbol - > rows , data [ i ] . expected_rows ) ;
assert_equal ( symbol - > width , data [ i ] . expected_width , " i:%d symbol->width %d != %d \n " , i , symbol - > width , data [ i ] . expected_width ) ;
}
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2022-09-13 06:26:04 +12:00
static void test_input ( const testCtx * const p_ctx ) {
int debug = p_ctx - > debug ;
2020-12-20 06:13:35 +13:00
struct item {
int input_mode ;
int eci ;
int option_1 ;
int option_2 ;
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
struct zint_structapp structapp ;
2020-12-20 06:13:35 +13:00
char * data ;
int length ;
char * primary ;
int ret ;
int expected_width ;
char * expected ;
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
int bwipp_cmp ;
int zxingcpp_cmp ;
2020-12-20 06:13:35 +13:00
char * comment ;
} ;
struct item data [ ] = {
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
/* 0*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 01 21 21 21 21 21 21 21 21 08 0E 19 2B 20 0C 24 06 32 1C 21 21 21 21 21 21 21 21 " , 1 , 1 , " " } ,
/* 1*/ { UNICODE_MODE , - 1 , 2 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_DATA , 0 , " Error 551: Invalid length for Primary Message " , 1 , 1 , " " } ,
/* 2*/ { UNICODE_MODE , - 1 , 2 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " A123456 " , ZINT_ERROR_INVALID_DATA , 0 , " Error 555: Non-numeric postcode in Primary Message " , 1 , 1 , " " } ,
/* 3*/ { UNICODE_MODE , - 1 , 2 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 1123456 " , 0 , 30 , " (144) 12 00 00 00 00 10 30 1E 20 1C 1A 3D 1C 0D 1B 15 3C 17 3C 08 01 21 21 21 21 21 21 21 " , 0 , 1 , " 1-digit postcode " } ,
/* 4*/ { UNICODE_MODE , - 1 , 2 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 1 123456 " , 0 , 30 , " (144) 12 00 00 00 00 10 30 1E 20 1C 1A 3D 1C 0D 1B 15 3C 17 3C 08 01 21 21 21 21 21 21 21 " , 0 , 0 , " 1-digit postcode; ZXing-C++ test can't handle space " } ,
/* 5*/ { UNICODE_MODE , - 1 , 2 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 123456789123456 " , 0 , 30 , " (144) 12 05 0D 2F 35 11 32 1E 20 1C 0D 1D 3B 12 22 3F 30 14 23 1A 01 21 21 21 21 21 21 21 " , 0 , 1 , " 9-digit postcode " } ,
/* 6*/ { UNICODE_MODE , - 1 , 2 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 1234567890123456 " , ZINT_ERROR_INVALID_DATA , 0 , " Error 551: Invalid length for Primary Message " , 1 , 1 , " 10-digit postcode " } ,
/* 7*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 1123456 " , 0 , 30 , " (144) 12 00 00 00 00 10 30 1E 20 1C 1A 3D 1C 0D 1B 15 3C 17 3C 08 01 21 21 21 21 21 21 21 " , 0 , 1 , " 1-digit postcode " } ,
/* 8*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 123456789123456 " , 0 , 30 , " (144) 12 05 0D 2F 35 11 32 1E 20 1C 0D 1D 3B 12 22 3F 30 14 23 1A 01 21 21 21 21 21 21 21 " , 0 , 1 , " 9-digit postcode " } ,
/* 9*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 1234567890123456 " , ZINT_ERROR_INVALID_DATA , 0 , " Error 551: Invalid length for Primary Message " , 1 , 1 , " 10-digit postcode " } ,
/* 10*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 123456 " , ZINT_ERROR_INVALID_DATA , 0 , " Error 551: Invalid length for Primary Message " , 1 , 1 , " 0-digit postcode " } ,
/* 11*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 12345678123456 " , 0 , 30 , " (144) 22 13 21 31 0B 00 32 1E 20 1C 04 14 07 30 10 07 08 28 1D 09 01 21 21 21 21 21 21 21 " , 0 , 1 , " 8-digit postcode " } ,
/* 12*/ { UNICODE_MODE , - 1 , 3 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_DATA , 0 , " Error 551: Invalid length for Primary Message " , 1 , 1 , " " } ,
/* 13*/ { UNICODE_MODE , - 1 , 3 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " A123456 " , 0 , 30 , " (144) 03 08 08 08 08 18 30 1E 20 1C 22 35 1C 0F 02 1A 26 04 10 31 01 21 21 21 21 21 21 21 " , 1 , 1 , " 1-alphanumeric postcode " } ,
/* 14*/ { UNICODE_MODE , - 1 , 3 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 1123456 " , 0 , 30 , " (144) 03 08 08 08 08 18 3C 1E 20 1C 13 37 07 2C 26 2D 18 29 3F 2C 01 21 21 21 21 21 21 21 " , 0 , 0 , " 1-digit postcode; ZXing-C++ test can't handle padding " } ,
/* 15*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " A123456 " , 0 , 30 , " (144) 03 08 08 08 08 18 30 1E 20 1C 22 35 1C 0F 02 1A 26 04 10 31 01 21 21 21 21 21 21 21 " , 1 , 1 , " 1-alphanumeric postcode " } ,
/* 16*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " ABCDEF123456 " , 0 , 30 , " (144) 23 11 01 31 20 10 30 1E 20 1C 3C 1D 22 03 19 15 0F 20 0F 2A 01 21 21 21 21 21 21 21 " , 1 , 1 , " 6-alphanumeric postcode " } ,
/* 17*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " ABCDEFG123456 " , 0 , 30 , " (144) 23 11 01 31 20 10 30 1E 20 1C 3C 1D 22 03 19 15 0F 20 0F 2A 01 21 21 21 21 21 21 21 " , 1 , 0 , " 7-alphanumeric postcode truncated; ZXing-C++ test can't handle truncation " } ,
/* 18*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " ABCDE123456 " , 0 , 30 , " (144) 03 18 01 31 20 10 30 1E 20 1C 0F 38 38 1A 39 10 2F 37 22 12 01 21 21 21 21 21 21 21 " , 1 , 1 , " 5-alphanumeric postcode " } ,
/* 19*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " AAAAAA 840001 " , 0 , 30 , " (144) 13 10 10 10 10 10 00 12 07 00 17 36 2E 38 04 29 16 0D 27 16 01 21 21 21 21 21 21 21 " , 1 , 0 , " 6-alphanumeric postcode with padding; ZXing-C++ test can't handle padding " } ,
/* 20*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " AAAAA A840001 " , 0 , 30 , " (144) 03 18 10 10 10 10 00 12 07 00 19 07 29 31 26 01 23 2C 2E 07 01 21 21 21 21 21 21 21 " , 1 , 0 , " 7-alphanumeric with embedded padding truncated; ZXing-C++ test can't handle truncation " } ,
/* 21*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " AA \015 AAA840001 " , ZINT_ERROR_INVALID_DATA , 0 , " Error 556: Invalid character in postcode in Primary Message " , 1 , 1 , " Alphanumeric postcode with CR " } ,
/* 22*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " A#%-/A840001 " , 0 , 30 , " (144) 13 30 1B 1B 39 18 00 12 07 00 3F 1E 25 07 2A 1E 14 3C 28 2D 01 21 21 21 21 21 21 21 " , 1 , 1 , " Alphanumeric postcode with non-control Code A chars " } ,
/* 23*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 1A23456 " , ZINT_ERROR_INVALID_DATA , 0 , " Error 552: Non-numeric country code or service class in Primary Message " , 1 , 1 , " Non-numeric country code " } ,
/* 24*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 12345678912345A " , ZINT_ERROR_INVALID_DATA , 0 , " Error 552: Non-numeric country code or service class in Primary Message " , 1 , 1 , " Non-numeric service class " } ,
/* 25*/ { UNICODE_MODE , - 1 , 0 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " 123456789123456 " , 0 , 30 , " (144) 12 05 0D 2F 35 11 32 1E 20 1C 0D 1D 3B 12 22 3F 30 14 23 1A 01 21 21 21 21 21 21 21 " , 0 , 1 , " Auto-determine mode 2 " } ,
/* 26*/ { UNICODE_MODE , - 1 , 0 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_DATA , 0 , " Error 554: Primary Message empty " , 1 , 1 , " Auto-determine mode 2/3 requires primary message " } ,
/* 27*/ { UNICODE_MODE , - 1 , 0 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " A23456123456 " , 0 , 30 , " (144) 23 1D 0D 3D 2C 1C 30 1E 20 1C 24 35 30 31 2A 0D 17 14 16 3D 01 21 21 21 21 21 21 21 " , 1 , 1 , " Auto-determine mode 3 " } ,
/* 28*/ { UNICODE_MODE , - 1 , - 1 , 100 , { 0 , 0 , " " } , " A " , - 1 , " 123456123456 " , 0 , 30 , " (144) 02 10 22 07 00 20 31 1E 20 1C 0E 29 13 1B 0D 26 36 25 3B 22 3B 2A 29 3B 28 1E 30 31 " , 0 , 1 , " SCM prefix version " } ,
/* 29*/ { UNICODE_MODE , - 1 , - 1 , 101 , { 0 , 0 , " " } , " A " , - 1 , " 123456123456 " , ZINT_ERROR_INVALID_OPTION , 0 , " Error 557: Invalid SCM prefix version " , 1 , 1 , " SCM prefix version " } ,
/* 30*/ { UNICODE_MODE , 3 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 03 01 21 21 21 21 21 21 2F 14 23 21 05 24 27 00 24 0C 21 21 21 21 21 21 21 21 " , 1 , 1 , " " } ,
/* 31*/ { UNICODE_MODE , 31 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 1F 01 21 21 21 21 21 21 00 2F 0E 09 39 3B 24 1A 21 05 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x1F " } ,
/* 32*/ { UNICODE_MODE , 32 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 20 20 01 21 21 21 21 21 3D 15 0F 30 0D 22 24 35 22 06 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x20 " } ,
/* 33*/ { UNICODE_MODE , 1023 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 2F 3F 01 21 21 21 21 21 2E 27 23 1D 35 19 21 04 3A 26 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x3FF " } ,
/* 34*/ { UNICODE_MODE , 1024 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 30 10 00 01 21 21 21 21 11 2F 15 10 1D 29 06 35 14 2B 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x400 " } ,
/* 35*/ { UNICODE_MODE , 32767 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 37 3F 3F 01 21 21 21 21 3E 15 12 01 07 30 39 27 04 2B 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x7FFF " } ,
/* 36*/ { UNICODE_MODE , 32768 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 38 08 00 00 01 21 21 21 10 30 3A 04 26 23 0E 21 3D 0F 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x8000 " } ,
/* 37*/ { UNICODE_MODE , 65535 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 38 0F 3F 3F 01 21 21 21 1C 0E 1D 39 3B 0D 38 25 00 30 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0xFFFF " } ,
/* 38*/ { UNICODE_MODE , 65536 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 38 10 00 00 01 21 21 21 2B 1F 24 06 38 2E 17 1B 10 2F 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x10000 " } ,
/* 39*/ { UNICODE_MODE , 131071 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 38 1F 3F 3F 01 21 21 21 0F 05 09 04 2F 3A 17 09 36 31 21 21 21 21 21 21 21 21 " , 1 , 1 , " ECI 0x1FFFF " } ,
/* 40*/ { UNICODE_MODE , 999999 , - 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 1B 3B 34 08 3F 01 21 21 21 26 3B 2B 23 08 17 32 05 26 35 21 21 21 21 21 21 21 21 " , 1 , 1 , " Max ECI " } ,
/* 41*/ { UNICODE_MODE , - 1 , 1 , - 1 , { 0 , 0 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_OPTION , 0 , " Error 550: Invalid MaxiCode Mode " , 1 , 1 , " " } ,
/* 42*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " \015 " , - 1 , " " , 0 , 30 , " (144) 04 00 21 21 21 21 21 21 21 21 37 32 10 01 24 1B 10 11 38 0C 21 21 21 21 21 21 21 21 " , 1 , 0 , " ZXing-C++ test can't handle LF " } ,
/* 43*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 0 , " " } , " \001 \034 \001 \035 \001 \036 \001 a:b " , - 1 , " " , 0 , 30 , " (144) 04 3E 3E 01 20 01 21 01 22 01 27 0B 35 01 08 0D 16 02 17 1A 3F 01 33 02 21 21 21 21 " , 1 , 1 , " " } ,
/* 44*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 1 , 2 , " " } , " A " , - 1 , " " , 0 , 30 , " (144) 04 21 01 01 21 21 21 21 21 21 09 0B 26 03 37 0E 25 27 07 1E 21 21 21 21 21 21 21 21 " , 1 , 1 , " " } ,
/* 45*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 0 , 2 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_OPTION , 0 , " Error 559: Structured Append index out of range (1-2) " , 1 , 1 , " " } ,
/* 46*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 1 , 1 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_OPTION , 0 , " Error 558: Structured Append count out of range (2-8) " , 1 , 1 , " " } ,
/* 47*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 1 , 9 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_OPTION , 0 , " Error 558: Structured Append count out of range (2-8) " , 1 , 1 , " " } ,
/* 48*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 3 , 2 , " " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_OPTION , 0 , " Error 559: Structured Append index out of range (1-2) " , 1 , 1 , " " } ,
/* 49*/ { UNICODE_MODE , - 1 , - 1 , - 1 , { 1 , 2 , " A " } , " A " , - 1 , " " , ZINT_ERROR_INVALID_OPTION , 0 , " Error 549: Structured Append ID not available for MaxiCode " , 1 , 1 , " " } ,
2020-12-20 06:13:35 +13:00
} ;
2021-02-23 13:01:15 +13:00
int data_size = ARRAY_SIZE ( data ) ;
2021-06-24 02:00:49 +12:00
int i , length , ret ;
struct zint_symbol * symbol ;
2020-12-20 06:13:35 +13:00
char escaped [ 1024 ] ;
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
char cmp_buf [ 32768 ] ;
char cmp_msg [ 1024 ] ;
2022-07-20 07:56:07 +12:00
int do_bwipp = ( debug & ZINT_DEBUG_TEST_BWIPP ) & & testUtilHaveGhostscript ( ) ; /* Only do BWIPP test if asked, too slow otherwise */
int do_zxingcpp = ( debug & ZINT_DEBUG_TEST_ZXINGCPP ) & & testUtilHaveZXingCPPDecoder ( ) ; /* Only do ZXing-C++ test if asked, too slow otherwise */
2020-12-20 06:13:35 +13:00
2021-06-24 02:00:49 +12:00
testStart ( " test_input " ) ;
for ( i = 0 ; i < data_size ; i + + ) {
2020-12-20 06:13:35 +13:00
2022-09-13 06:26:04 +12:00
if ( testContinue ( p_ctx , i ) ) continue ;
2020-12-20 06:13:35 +13:00
2021-06-24 02:00:49 +12:00
symbol = ZBarcode_Create ( ) ;
2020-12-20 06:13:35 +13:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
2022-07-20 07:56:07 +12:00
symbol - > debug = ZINT_DEBUG_TEST ; /* Needed to get codeword dump in errtxt */
2020-12-20 06:13:35 +13:00
2021-06-24 02:00:49 +12:00
length = testUtilSetSymbol ( symbol , BARCODE_MAXICODE , data [ i ] . input_mode , data [ i ] . eci , data [ i ] . option_1 , data [ i ] . option_2 , - 1 , - 1 /*output_options*/ , data [ i ] . data , data [ i ] . length , debug ) ;
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
if ( data [ i ] . structapp . count ) {
symbol - > structapp = data [ i ] . structapp ;
}
2020-12-20 06:13:35 +13:00
strcpy ( symbol - > primary , data [ i ] . primary ) ;
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
2022-09-13 06:26:04 +12:00
if ( p_ctx - > generate ) {
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
printf ( " /*%3d*/ { %s, %d, %d, %d, { %d, %d, \" %s \" }, \" %s \" , %d, \" %s \" , %s, %d, \" %s \" , %d, %d, \" %s \" }, \n " ,
2020-12-20 06:13:35 +13:00
i , testUtilInputModeName ( data [ i ] . input_mode ) , data [ i ] . eci , data [ i ] . option_1 , data [ i ] . option_2 ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
data [ i ] . structapp . index , data [ i ] . structapp . count , data [ i ] . structapp . id ,
2020-12-20 06:13:35 +13:00
testUtilEscape ( data [ i ] . data , length , escaped , sizeof ( escaped ) ) , data [ i ] . length , data [ i ] . primary ,
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
testUtilErrorName ( data [ i ] . ret ) , symbol - > width , symbol - > errtxt , data [ i ] . bwipp_cmp , data [ i ] . zxingcpp_cmp , data [ i ] . comment ) ;
2020-12-20 06:13:35 +13:00
} else {
2021-02-23 13:01:15 +13:00
if ( ret < ZINT_ERROR ) {
2020-12-20 06:13:35 +13:00
assert_equal ( symbol - > width , data [ i ] . expected_width , " i:%d symbol->width %d != %d (%s) \n " , i , symbol - > width , data [ i ] . expected_width , data [ i ] . data ) ;
}
assert_zero ( strcmp ( symbol - > errtxt , data [ i ] . expected ) , " i:%d strcmp(%s, %s) != 0 \n " , i , symbol - > errtxt , data [ i ] . expected ) ;
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
if ( ret < ZINT_ERROR ) {
if ( do_bwipp & & testUtilCanBwipp ( i , symbol , - 1 , data [ i ] . option_2 , - 1 , debug ) ) {
if ( ! data [ i ] . bwipp_cmp ) {
if ( debug & ZINT_DEBUG_TEST_PRINT ) printf ( " i:%d %s not BWIPP compatible (%s) \n " , i , testUtilBarcodeName ( symbol - > symbology ) , data [ i ] . comment ) ;
} else {
char modules_dump [ 33 * 33 + 1 ] ;
assert_notequal ( testUtilModulesDump ( symbol , modules_dump , sizeof ( modules_dump ) ) , - 1 , " i:%d testUtilModulesDump == -1 \n " , i ) ;
ret = testUtilBwipp ( i , symbol , - 1 , data [ i ] . option_2 , - 1 , data [ i ] . data , length , symbol - > primary , cmp_buf , sizeof ( cmp_buf ) , NULL ) ;
assert_zero ( ret , " i:%d %s testUtilBwipp ret %d != 0 \n " , i , testUtilBarcodeName ( symbol - > symbology ) , ret ) ;
ret = testUtilBwippCmp ( symbol , cmp_msg , cmp_buf , modules_dump ) ;
assert_zero ( ret , " i:%d %s testUtilBwippCmp %d != 0 %s \n actual: %s \n expected: %s \n " ,
i , testUtilBarcodeName ( symbol - > symbology ) , ret , cmp_msg , cmp_buf , modules_dump ) ;
}
}
if ( do_zxingcpp & & testUtilCanZXingCPP ( i , symbol , data [ i ] . data , length , debug ) ) {
if ( ! data [ i ] . zxingcpp_cmp ) {
if ( debug & ZINT_DEBUG_TEST_PRINT ) printf ( " i:%d %s not ZXing-C++ compatible (%s) \n " , i , testUtilBarcodeName ( symbol - > symbology ) , data [ i ] . comment ) ;
} else {
int cmp_len , ret_len ;
char modules_dump [ 33 * 33 + 1 ] ;
assert_notequal ( testUtilModulesDump ( symbol , modules_dump , sizeof ( modules_dump ) ) , - 1 , " i:%d testUtilModulesDump == -1 \n " , i ) ;
ret = testUtilZXingCPP ( i , symbol , data [ i ] . data , length , modules_dump , cmp_buf , sizeof ( cmp_buf ) , & cmp_len ) ;
assert_zero ( ret , " i:%d %s testUtilZXingCPP ret %d != 0 \n " , i , testUtilBarcodeName ( symbol - > symbology ) , ret ) ;
ret = testUtilZXingCPPCmp ( symbol , cmp_msg , cmp_buf , cmp_len , data [ i ] . data , length , symbol - > primary , escaped , & ret_len ) ;
assert_zero ( ret , " i:%d %s testUtilZXingCPPCmp %d != 0 %s \n actual: %.*s \n expected: %.*s \n " ,
i , testUtilBarcodeName ( symbol - > symbology ) , ret , cmp_msg , cmp_len , cmp_buf , ret_len , escaped ) ;
}
}
}
2020-12-20 06:13:35 +13:00
}
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2022-09-13 06:26:04 +12:00
static void test_encode ( const testCtx * const p_ctx ) {
int debug = p_ctx - > debug ;
2020-06-05 05:45:25 +12:00
struct item {
int input_mode ;
int option_1 ;
2020-12-20 06:13:35 +13:00
int option_2 ;
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
struct zint_structapp structapp ;
2020-10-04 10:51:08 +13:00
char * data ;
2020-12-20 06:13:35 +13:00
int length ;
2021-08-10 23:04:25 +12:00
char * primary ;
2020-06-05 05:45:25 +12:00
int ret ;
int expected_rows ;
int expected_width ;
2021-03-29 09:31:45 +13:00
int bwipp_cmp ;
2020-06-05 05:45:25 +12:00
char * comment ;
char * expected ;
} ;
struct item data [ ] = {
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 0*/ { - 1 , - 1 , - 1 , { 0 , 0 , " " } , " THIS IS A 93 CHARACTER CODE SET A MESSAGE THAT FILLS A MODE 4, UNAPPENDED, MAXICODE SYMBOL... " , - 1 , " " , 0 , 33 , 30 , 1 , " ISO/IEC 16023:2000 Figure 2 (and L1), same " ,
2020-06-05 05:45:25 +12:00
" 011111010000001000001000100111 "
" 000100000001000000001010000000 "
" 001011001100100110110010010010 "
" 100000010001100010010000000000 "
" 001011000000101000001010110011 "
" 111010001000001011001000111100 "
" 100000000110000010010000000000 "
" 000010100010010010001001111100 "
" 111011100000001000000110000000 "
" 000000011011000000010100011000 "
" 101111000001010110001100000011 "
" 001110001010000000111010001110 "
" 000111100000000000100001011000 "
" 100010000000000000000111001000 "
" 100000001000000000011000001000 "
" 000010111000000000000010000010 "
" 111000001000000000001000001101 "
" 011000000000000000001000100100 "
" 000000101100000000001001010001 "
" 101010001000000000100111001100 "
" 001000011000000000011100001010 "
" 000000000000000000110000100000 "
" 101011001010100001000101010001 "
" 100011110010101001101010001010 "
" 011010000000000101011010011111 "
" 000001110011111111111100010100 "
" 001110100111000101011000011100 "
" 110111011100100001101001010110 "
" 000001011011101010010111001100 "
" 111000110111100010001111011110 "
" 101111010111111000010110111001 "
" 001001101111101101101010011100 "
" 001011000000111101100100001000 "
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 1*/ { - 1 , 4 , - 1 , { 0 , 0 , " " } , " MaxiCode (19 chars) " , - 1 , " " , 0 , 33 , 30 , 0 , " ISO/IEC 16023:2000 Figure H1 **NOT SAME** different encodation (figure uses '3 Shift A' among other differences); BWIPP different encodation again " ,
2020-06-05 05:45:25 +12:00
" 001101011111011100000010101111 "
" 101100010001001100010000001100 "
" 101100001010001111001001111101 "
" 010101010101010101010101010100 "
" 000000000000000000000000000111 "
" 101010101010101010101010101000 "
" 010101010101010101010101010111 "
" 000000000000000000000000000010 "
" 101010101010101010101010101000 "
" 010101011111111100000001010100 "
" 000000000011110110001000000000 "
" 101010101110000000111010101000 "
" 010101100010000000001101010101 "
" 000000101000000000001000000000 "
" 101010000000000000011010101000 "
" 010101010000000000001101010100 "
" 000000001000000000001000000011 "
" 101010110000000000001010101010 "
" 010101101100000000010101010111 "
" 000000100000000000000000000000 "
" 101010010110000000000110101011 "
" 010101010110000000001001010100 "
" 000000000110001011000000000010 "
" 101010100110111001010010101000 "
" 010101010101010101010000101111 "
" 000000000000000000001100100000 "
" 101010101010101010100101000001 "
" 000011000111010110101100010000 "
" 111001111110111110011000111111 "
" 000001110010000010110001100100 "
" 000111000000001111011000010010 "
" 010110010110001110100000010100 "
" 010011110011000001010111100111 "
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 2*/ { DATA_MODE | ESCAPE_MODE , 2 , 96 , { 0 , 0 , " " } , " 1Z00004951 \\ GUPSN \\ G06X610 \\ G159 \\ G1234567 \\ G1/1 \\ G \\ GY \\ G634 ALPHA DR \\ GPITTSBURGH \\ GPA \\ R \\ E " , - 1 , " 152382802840001 " , 0 , 33 , 30 , 0 , " ISO/IEC 16023:2000 Figure B2 **NOT SAME** uses different encodation (figure precedes PAD chars with Latch B); BWIPP different encodation again " ,
2020-12-20 06:13:35 +13:00
" 110101110110111110111111101111 "
" 010101010111000011011000010010 "
" 110110110001001010101010010011 "
" 111000101010101111111111111100 "
" 001111000010110010011000000011 "
" 001001110010101010100000000000 "
" 111011111110111111101111111110 "
" 100110000011001001110000001010 "
" 010001100010101010101001110001 "
" 110111100011010000011011111100 "
" 001100110011110000001110101001 "
" 101110101000000001011111011000 "
" 101010000000000000010110111100 "
" 111101100000000000011011100010 "
" 101010010000000000000110011101 "
" 001000010000000000011100011110 "
" 010011001000000000001000001010 "
" 000000101000000000001010000010 "
" 000100111100000000001110101010 "
" 000010101100000000001000110010 "
" 100000111010000000011101100011 "
" 101000100000000000110110100000 "
" 001000001110100101100110100101 "
" 011001110010101001100000001000 "
" 000010100010110001010101011010 "
" 100111000011111000001001011000 "
" 110010001001010010101100011101 "
" 001001110101110100011001110010 "
" 011111010011101100111101010011 "
" 111111101111101010101101111000 "
" 101001110101110111010111000011 "
" 010110101101000001111000100110 "
" 110110100000010000001011110011 "
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 3*/ { - 1 , 3 , - 1 , { 0 , 0 , " " } , " CEN " , - 1 , " B1050056999 " , 0 , 33 , 30 , 1 , " ISO/IEC 16023:2000 B.1 Example (primary only given, data arbitrary); verified manually against tec-it " ,
2020-12-20 06:13:35 +13:00
" 000000010101010101010101010111 "
" 001011000000000000000000000010 "
" 111001101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101010 "
" 010101010101010101010101010100 "
" 000000000000000000000000000010 "
" 101010101010101010101010101000 "
" 010101010111100000100101010110 "
" 000000000001110000010100000010 "
" 101010101000000011010010101010 "
" 010101111100000000100001010110 "
" 000000001100000000011000000010 "
" 101010100100000000011110101001 "
" 010101011000000000000001010110 "
" 000000101000000000001000000001 "
" 101010110000000000001010101010 "
" 010101010000000000011101010101 "
" 000000101000000000011100000000 "
" 101010111100000000001010101001 "
" 010101011110000000011101010110 "
" 000000001110000001111000000011 "
" 101010101011011001000110101010 "
" 010101010101010101011100100010 "
" 000000000000000000000011011100 "
" 101010101010101010101001110100 "
" 111011101110000110101011010110 "
" 100001011111111101000011100111 "
" 110100001000001101100010100110 "
" 110110111111011110000011011111 "
" 010010001001110010000101000010 "
" 010001011010000011010010011100 "
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 4*/ { UNICODE_MODE | ESCAPE_MODE , - 1 , - 1 , { 0 , 0 , " " } , " Comité Européen de Normalisation \034 rue de Stassart 36 \034 B-1050 BRUXELLES \034 TEL +3225196811 " , - 1 , " " , 0 , 33 , 30 , 0 , " ISO/IEC 16023:2000 Example F.5 **NOT SAME** uses different encodation (2 Shift A among other things); BWIPP different encodation again " ,
2020-12-20 06:13:35 +13:00
" 010010100010110000000100001111 "
" 001010001100110110111110100110 "
" 001010011100101010011100100000 "
" 000000100010000000001000000110 "
" 111101100000011100110011110001 "
" 011110001011100010100111010010 "
" 101010000100001101101000101001 "
" 110010101110100100001000000000 "
" 000110101100100000110010111110 "
" 111101111111111000110110100000 "
" 100000111001111010010010000011 "
" 011100111100000000101100011010 "
" 100001101110000000101111111101 "
" 110011000100000000111100001010 "
" 000110010000000000010110001010 "
" 101010010000000000001000011100 "
" 011000001000000000001000000010 "
" 001001010000000000001101000000 "
" 000000010000000000010100101000 "
" 101111110100000000011110001100 "
" 100000000010000000011010110011 "
" 101001010010000001011100001010 "
" 001101000010001011110111101010 "
" 111111001010000001100100100000 "
" 001000001101010101010010111001 "
" 111001000000000000001010100000 "
" 010001101010101010101010110001 "
" 011011000011100001011001101100 "
" 101100000001111010000001100011 "
" 110001001100011100110111011010 "
" 011110010010101101110100000100 "
" 001011110011100001001001101100 "
" 000010111011111010110011000011 "
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 5*/ { - 1 , - 1 , - 1 , { 0 , 0 , " " } , " 999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999 " , - 1 , " " , 0 , 33 , 30 , 1 , " Numeric compaction, verified manually against tec-it " ,
2020-12-20 06:13:35 +13:00
" 010111101101010111101101010111 "
" 111011110110111011110110111010 "
" 001111111101001111111101001100 "
" 101101010111101101010111101100 "
" 111110111001111110111001111100 "
" 111111000111111111000111111110 "
" 110101011110110101011110110110 "
" 011011101111011011101111011000 "
" 110100111111110100111111110101 "
" 010111101111111100110111010100 "
" 111001111011011110011111101100 "
" 000111111110000000111011110000 "
" 011110100110000000000111010101 "
" 101111001000000000110101101110 "
" 111111110100000000000011010001 "
" 010111111000000000001110110110 "
" 111001101000000000001011111001 "
" 000111010000000000001011111100 "
" 011110011000000000011011010101 "
" 101111000100000000010001101100 "
" 111111100110000000100111010010 "
" 010101110100000001010110110110 "
" 101110011010101111111011111011 "
" 110001110111110101111011111110 "
" 111011010101111111110000111011 "
" 111101101110110101010001001000 "
" 111111010011111010101111110011 "
" 000101011000111100010001000010 "
" 011110001101100001011010110010 "
" 101110000100010011000001001000 "
" 100000001010110100100110001100 "
" 111010101011001101111001011010 "
" 011110011111000011101011111011 "
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 6*/ { - 1 , 5 , - 1 , { 0 , 0 , " " } , " \000 \001 \002 \003 \004 \005 \006 \007 \010 \011 \012 \013 \014 \015 \016 \017 \020 \021 \022 \023 \024 \025 \026 \027 \030 \031 \032 \033 \037 \237 \240 \242 \243 \244 \245 \246 \247 \251 \255 \256 \266 \225 \226 \227 \230 \231 \232 \233 \234 \235 \236 " , 51 , " " , 0 , 33 , 30 , 1 , " Mode 5 set E " ,
2020-12-20 06:13:35 +13:00
" 000000000000000000101010101011 "
2021-03-29 09:31:45 +13:00
" 100101010111111111000000001010 "
" 110010011100100111001001110010 "
" 010101010101011010101010101010 "
" 010110101010001101010110101001 "
2020-12-20 06:13:35 +13:00
" 100011011000110101100011011000 "
" 010101010101111111111111111110 "
" 010111111111000000001010101010 "
" 011100100111001001110010011101 "
2021-03-29 09:31:45 +13:00
" 010101011011110000001011111110 "
" 000000001111110010010001010110 "
" 101010100110000010001001100000 "
" 010101110010000000001101010111 "
2020-12-20 06:13:35 +13:00
" 000000111000000000001000000010 "
" 101010110100000000001110101011 "
" 010101010000000000001001010100 "
" 000000001000000000001000000001 "
2021-03-29 09:31:45 +13:00
" 101010100000000000001010101000 "
" 010101100000000000001001010110 "
2020-12-20 06:13:35 +13:00
" 000000000000000000000000000000 "
" 101010100100000000011110101010 "
2021-03-29 09:31:45 +13:00
" 101100110100000001110101110110 "
" 011000000010110101110111000011 "
" 110111000010110001001000011010 "
" 100001101111010001110110101000 "
" 111110011001100100010110010010 "
" 100011110000001110111011000001 "
" 111001000110000011101000011000 "
" 101110110100100001100011011111 "
" 101100010011001000110000101100 "
" 110101001101000000111101001111 "
" 100111110000101000000001110100 "
" 100101010010100000010101000111 "
2020-12-20 06:13:35 +13:00
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 7*/ { - 1 , 6 , - 1 , { 0 , 0 , " " } , " \340 \341 \342 \343 \344 \345 \346 \347 \350 \351 \352 \353 \354 \355 \356 \357 \360 \361 \362 \363 \364 \365 \366 \367 \370 \371 \372 \373 \374 \375 \376 \377 \241 \250 \253 \257 \260 \264 \267 \270 \273 \277 \212 \213 \214 \215 \216 \217 \220 \221 \222 \223 \224 " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 6 set D " ,
2020-12-20 06:13:35 +13:00
" 000000000000000000101010101011 "
2021-03-29 09:31:45 +13:00
" 100101010111111111000000001010 "
2020-12-20 06:13:35 +13:00
" 110010011100100111001001110001 "
2021-03-29 09:31:45 +13:00
" 010101010101010110101010101010 "
2020-12-20 06:13:35 +13:00
" 101010100000000001010110101000 "
" 110110001101100001100011011000 "
" 010101010101010111111111111111 "
" 010101011111111100000000101000 "
" 001001110010011100100111001001 "
2021-03-29 09:31:45 +13:00
" 010111110111110000000011111110 "
" 000001011011110010011101101011 "
" 101001101110000001000100110110 "
" 010101110000000000000001010110 "
2020-12-20 06:13:35 +13:00
" 000000101000000000000000000010 "
" 101010110100000000000110101010 "
" 010101010000000000001001010100 "
" 000000001000000000001000000011 "
2021-03-29 09:31:45 +13:00
" 101010100000000000001010101010 "
" 010101101100000000001001010111 "
2020-12-20 06:13:35 +13:00
" 000000101000000000001000000010 "
" 101010010110000000011010101001 "
" 010101011100000000111101010100 "
" 000000001110110111011000000011 "
" 101010100110110001100110101010 "
2021-03-29 09:31:45 +13:00
" 010101010101010101011001011100 "
" 000000000000000000001000000000 "
" 101010101010101010101010100010 "
" 101100011100101000011001110100 "
" 011100110000010001111110111110 "
" 101101100000111001011101001010 "
" 001100111110101100001101010101 "
" 011111001010000101000011000110 "
" 101111010010011100100011110010 "
2020-12-20 06:13:35 +13:00
} ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
/* 8*/ { - 1 , 6 , - 1 , { 0 , 0 , " " } , " \300 \301 \302 \303 \304 \305 \306 \307 \310 \311 \312 \313 \314 \315 \316 \317 \320 \321 \322 \323 \324 \325 \326 \327 \330 \331 \332 \333 \334 \335 \336 \337 \252 \254 \261 \262 \263 \265 \271 \272 \274 \275 \276 \200 \201 \202 \203 \204 \205 \206 \207 \210 \211 " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 6 set C " ,
2020-12-20 06:13:35 +13:00
" 000000000000000000101010101011 "
2021-03-29 09:31:45 +13:00
" 100101010111111111000000001010 "
2020-12-20 06:13:35 +13:00
" 110010011100100111001001110001 "
2021-03-29 09:31:45 +13:00
" 010101010101010110101010101010 "
2020-12-20 06:13:35 +13:00
" 101010100000000001010110101000 "
" 110110001101100001100011011000 "
" 010101010101010111111111111111 "
" 010101011111111100000000101000 "
" 001001110010011100100111001001 "
2021-03-29 09:31:45 +13:00
" 010111111111110000000111111110 "
" 000001010111110010010001101011 "
" 101001101010000001001100110110 "
" 010101100000000000000101010110 "
2020-12-20 06:13:35 +13:00
" 000000011000000000000100000010 "
" 101010110100000000000010101010 "
" 010101010000000000001001010100 "
" 000000001000000000001000000011 "
2021-03-29 09:31:45 +13:00
" 101010100000000000001010101010 "
" 010101110000000000001001010111 "
2020-12-20 06:13:35 +13:00
" 000000111100000000001100000010 "
" 101010110000000000010110101001 "
" 010101010100000000101101010100 "
" 000000001010110101011000000011 "
" 101010100010110001010110101010 "
2021-03-29 09:31:45 +13:00
" 010101010101010101011001011100 "
" 000000000000000000001000000000 "
" 101010101010101010101010100010 "
" 101100011100101000011001110100 "
" 011100110000010001111110111110 "
" 101101100000111001011101001010 "
" 001100111110101100001101010101 "
" 011111001010000101000011000110 "
" 101111010010011100100011110010 "
} ,
2022-07-20 07:56:07 +12:00
/* 9*/ { UNICODE_MODE | ESCAPE_MODE , 4 , - 1 , { 0 , 0 , " " } , " `abcdefghijklmnopqrstuvwxyz \034 \\ G \\ R{}~ \177 ;<=>?[ \\ \\ ]^_ ,./:@!| " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 Set B " ,
" 000000000000000010101010101011 "
" 010101011111111100000000101010 "
" 001001110010011100100111001000 "
" 010101010101101010101010101010 "
" 101010000000111111010101101000 "
" 011000110100011000011000110110 "
" 010101010101010101111111111110 "
" 100101010111111111000000001010 "
" 110010011100100111001001110010 "
" 010101011111000000000101111110 "
" 000000001101001010011000101000 "
" 101010101000000000100110011000 "
" 010101010000000000001001010101 "
" 000000111000000000001000000000 "
" 101010111100000000011010101010 "
" 010101010000000000000101010110 "
" 000000001000000000001000000010 "
" 101010100000000000001010101010 "
" 010101110100000000001101010101 "
" 000000010100000000101100000000 "
" 101010110100000000001010101000 "
" 010101010000000001010001010110 "
" 000000000010111111001000000010 "
" 101010101010110001011110101000 "
" 010101010101010101010010101000 "
" 000000000000000000000101100100 "
" 101010101010101010100010010110 "
" 001101100000000100111111111100 "
" 011101101001110010100010011010 "
" 111001101111100110001001101000 "
" 000001100000101010001100101010 "
" 100100110011010101001011100100 "
" 001000101111010000111000010101 "
} ,
/* 10*/ { UNICODE_MODE | ESCAPE_MODE , 4 , - 1 , { 0 , 0 , " " } , " \\ rABCDEFGHIJKLMNOPQRSTUVWXYZ \034 \\ G \\ R \" #$%&'()*+,-./0123456789: " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 Set A " ,
" 000000000000001010101010101011 "
" 010101111111110000000010101010 "
" 100111001001110010011100100101 "
" 010101010101011010101010101010 "
" 101010100000001111110101011011 "
" 110110001101000110000110001110 "
" 010101010101010110000100000011 "
" 010101011111111111001110101100 "
" 001001110010011111001101100110 "
" 010101010011000000000001111100 "
" 000000001001001010010100010100 "
" 101010100010000000010010011010 "
" 010101000000000000000001010100 "
" 000000110100000000100100000000 "
" 101010110000000000001010101011 "
" 010101010000000000001101010100 "
" 000000001000000000001000000010 "
" 101010100000000000001010101000 "
" 010101001100000000001101010100 "
" 000000111000000000101100000000 "
" 101010000010000000011110101001 "
" 010101010000000000100101010110 "
" 000000001110000001101000000001 "
" 101010100011000001001110101000 "
" 010101010101010101010011100001 "
" 000000000000000000000100010110 "
" 101010101010101010100100011110 "
" 101100000000000010001010010000 "
" 110010011000011000011011011001 "
" 111000110101100100110110101000 "
" 001001100010110011111101010101 "
" 110111010000000001010000100110 "
" 101001001010011101111100111011 "
} ,
/* 11*/ { UNICODE_MODE , 4 , - 1 , { 0 , 0 , " " } , " ABCDabcdAabcABabcABCabcABCDaABCabABCabcABCéa " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 LCHB SHA 2SHA 3SHA LCHA SHB LCHB 3SHA 3SHA SHD " ,
2021-03-29 09:31:45 +13:00
" 110000000011000000000011000011 "
" 010000000001000000000001000000 "
" 111010011100100110011110100101 "
" 000000001100000000110000000000 "
" 000000000110000000110000000010 "
" 110110101100110110111101101100 "
" 110000110000000000001100000000 "
" 110000010000000000000100000000 "
" 111001101001111001111010011110 "
" 010101010011000000001000001100 "
" 000000000001000010001000011111 "
" 101010100110000000010010101000 "
" 010101000010000000000001010101 "
" 000000001000000000101000000000 "
" 101010100000000000010010101010 "
" 010101011000000000001101010110 "
" 000000001000000000001000000001 "
" 101010001000000000001010101000 "
" 010101001100000000001001010111 "
" 000000111000000000011000000010 "
" 101010101000000000001110101000 "
" 010101010110000000010101010100 "
" 000000001110001111001100000001 "
" 101010101111000001101110101000 "
" 010101010101010101011101000110 "
" 000000000000000000000000000110 "
" 101010101010101010101101100100 "
" 000010001010001010000101010000 "
" 101000000111100010010001111100 "
" 101001111000010101010110110010 "
" 011101111110011111011100001000 "
" 110001000010011110111101111000 "
" 011010011011111110001000000010 "
} ,
2022-07-20 07:56:07 +12:00
/* 12*/ { UNICODE_MODE , 4 , - 1 , { 0 , 0 , " " } , " ÀÁÂÃ1 " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 LCKC LCHA " ,
2021-03-29 09:31:45 +13:00
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101010 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101011111110000111001010100 "
" 000000001111110010001000000000 "
" 101010101010000000011110101010 "
" 010101000100000000000101010110 "
" 000000110000000000000100000000 "
" 101010011000000000001110101000 "
" 010101110000000000001001010110 "
" 000000101000000000001000000010 "
" 101010000000000000001110101000 "
" 010101001100000000000001010111 "
" 000000100100000000001000000010 "
" 101010010000000000010110101011 "
" 010101011100000000001101010100 "
" 000000001010110101111100000011 "
" 101010101010110001111110101010 "
" 010101010101010101011111010111 "
" 000000000000000000001111010110 "
" 101010101010101010100000000010 "
" 111111110000111100000101000000 "
" 010110101111000011110101010100 "
" 101010100000010101011111101010 "
" 111101011010000011110101101010 "
" 010110101111010110101010111100 "
" 010100000000010110101010010100 "
} ,
2022-07-20 07:56:07 +12:00
/* 13*/ { UNICODE_MODE , 4 , - 1 , { 0 , 0 , " " } , " ÀÁÂÃ123456789 " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 LCKC NS " ,
2021-03-29 09:31:45 +13:00
" 111110110101010101010101010111 "
" 111010010000000000000000000000 "
" 000010011010101010101010101000 "
" 010101010101010101010101010100 "
" 000000000000000000000000000001 "
" 101010101010101010101010101010 "
" 010101010101010101010101010101 "
" 000000000000000000000000000000 "
" 101010101010101010101010101001 "
" 010101010111110000110001010110 "
" 000000000011110010010000000010 "
" 101010100110000000111010101010 "
" 010101011000000000001001010101 "
" 000000101000000000001000000000 "
" 101010000100000000000110101011 "
" 010101010000000000001101010110 "
" 000000001000000000001000000000 "
" 101010100000000000001010101000 "
" 010101100000000000001001010100 "
" 000000001000000000001100000010 "
" 101010110000000000011010101001 "
" 010101010100000000011001010100 "
" 000000001110110101111000000000 "
" 101010101010110001000110101010 "
" 010101010101010101010000101101 "
" 000000000000000000001110011100 "
" 101010101010101010100111100010 "
" 011101100110110110100011110010 "
" 010001101101001001100100011011 "
" 100011011110110000101000000010 "
" 101101111000011101010000100101 "
" 000000111100011110100001110000 "
" 101000000010100111001011110101 "
} ,
2022-07-20 07:56:07 +12:00
/* 14*/ { UNICODE_MODE , 4 , - 1 , { 0 , 0 , " " } , " àáâã1 " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 LCKD LCHA " ,
2021-03-29 09:31:45 +13:00
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101010 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101010111110000111101010100 "
" 000000000011110010000100000000 "
" 101010101110000000010110101010 "
" 010101010100000000000001010110 "
" 000000000000000000000000000000 "
" 101010011000000000001010101000 "
" 010101110000000000001001010110 "
" 000000101000000000001000000010 "
" 101010000000000000001110101000 "
" 010101010000000000000001010111 "
" 000000110000000000001100000010 "
" 101010110110000000011010101011 "
" 010101010100000000011101010100 "
" 000000001110110111111100000011 "
" 101010101110110001001110101010 "
" 010101010101010101011111010111 "
" 000000000000000000001111010110 "
" 101010101010101010100000000010 "
" 111111110000111100000101000000 "
" 010110101111000011110101010100 "
" 101010100000010101011111101010 "
" 111101011010000011110101101010 "
" 010110101111010110101010111100 "
" 010100000000010110101010010100 "
} ,
2022-07-20 07:56:07 +12:00
/* 15*/ { UNICODE_MODE , 4 , - 1 , { 0 , 0 , " " } , " ¢£¤¥1 " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 LCKE LCHA " ,
2021-03-29 09:31:45 +13:00
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101010 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101010111110100110001010100 "
" 000000000101110110000100000000 "
" 101010101010000000011110101010 "
" 010101010110000000001001010110 "
" 000000010000000000111000000000 "
" 101010011000000000001110101000 "
" 010101111000000000001001010110 "
" 000000101000000000001000000010 "
" 101010000000000000001110101000 "
" 010101111000000000001101010111 "
" 000000111100000000111000000010 "
" 101010001100000000111110101011 "
" 010101011110000001011101010100 "
" 000000001010110001011100000011 "
" 101010101010110101101010101010 "
" 010101010101010101011111010111 "
" 000000000000000000001111010110 "
" 101010101010101010100000000010 "
" 111111110000111100000101000000 "
" 010110101111000011110101010100 "
" 101010100000010101011111101010 "
" 111101011010000011110101101010 "
" 010110101111010110101010111100 "
" 010100000000010110101010010100 "
} ,
2022-07-20 07:56:07 +12:00
/* 16*/ { UNICODE_MODE , 4 , - 1 , { 0 , 0 , " " } , " ¢£¤¥123456789 " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 LCKE NS " ,
2021-03-29 09:31:45 +13:00
" 111110110101010101010101010111 "
" 111010010000000000000000000000 "
" 000010011010101010101010101000 "
" 010101010101010101010101010100 "
" 000000000000000000000000000001 "
" 101010101010101010101010101010 "
" 010101010101010101010101010101 "
" 000000000000000000000000000000 "
" 101010101010101010101010101001 "
" 010101011111110100111001010110 "
" 000000001001110110011100000010 "
" 101010100110000000111010101010 "
" 010101001010000000000101010101 "
" 000000001000000000110100000000 "
" 101010000100000000000110101011 "
" 010101011000000000001101010110 "
" 000000001000000000001000000000 "
" 101010100000000000001010101000 "
" 010101010100000000000101010100 "
" 000000010000000000111100000010 "
" 101010101100000000110010101001 "
" 010101010110000001001001010100 "
" 000000001110110001011000000000 "
" 101010101010110101010010101010 "
" 010101010101010101010000101101 "
" 000000000000000000001110011100 "
" 101010101010101010100111100010 "
" 011101100110110110100011110010 "
" 010001101101001001100100011011 "
" 100011011110110000101000000010 "
" 101101111000011101010000100101 "
" 000000111100011110100001110000 "
" 101000000010100111001011110101 "
} ,
2022-07-20 07:56:07 +12:00
/* 17*/ { UNICODE_MODE , 4 , - 1 , { 0 , 0 , " " } , " ABCDE12abcde1ÀÁÂ⣤¥1àáâãabcde123A123456789àáâ㢣¤¥abc " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 mixed sets " ,
2021-03-29 09:31:45 +13:00
" 000000001111111100000000111111 "
" 000010100100111100000000111100 "
" 011100101110000000100111010100 "
" 001100000000111111110101010110 "
" 001100000000111100010101101001 "
" 101111011000101010011000110110 "
" 000000001111111100100010111110 "
" 000010101100000000111010111000 "
" 011100101110011110111101000010 "
" 000000001011001100010111111010 "
" 000000000001000010000111111000 "
" 110110001110000000011110101010 "
" 111101000010000000001101010101 "
" 111110110000000000100110010100 "
" 010101101000000000010111001001 "
" 010100110000000000001100001110 "
" 000000101000000000001000001110 "
" 101011110000000000001101101110 "
" 010101101000000000000001010101 "
" 000000000100000000010000000000 "
" 101010100000000000000110101000 "
" 010101010100000000000101010100 "
" 000000001010001011100000000011 "
" 101010101011000001011010101000 "
" 010101010101010101010101001001 "
" 000000000000000000000010100000 "
" 101010101010101010101111110001 "
" 001110011111110100100011111000 "
" 011001101011100100010000010101 "
" 010000011110010110000011110010 "
" 110111100111000100111111001011 "
" 100011000001110011101110101000 "
" 001001110010111101100100010001 "
2020-12-20 06:13:35 +13:00
} ,
2022-07-20 07:56:07 +12:00
/* 18*/ { UNICODE_MODE , 4 , - 1 , { 3 , 7 , " " } , " THIS IS A 91 CHARACTER CODE SET A MESSAGE THAT FILLS A MODE 4, APPENDED, MAXICODE SYMBOL... " , - 1 , " " , 0 , 33 , 30 , 1 , " Mode 4 Structured Append " ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
" 010001111101000000100000100011 "
" 000000010000000100000000101000 "
" 001000101000110010011011001000 "
" 000100011000100100000000011000 "
" 110000001010000010101100000010 "
" 100010000010110010001111000100 "
" 001010000000011000001001000010 "
" 100000001010001001001000100110 "
" 101111101110000000100000011010 "
" 000100010011101000000110000010 "
" 110000000111100010001100111100 "
" 100010001010000000000011000010 "
" 000000001010000000010101110101 "
" 111010110000000000010100101100 "
" 110010111100000000001100000011 "
" 000010010000000000001010000100 "
" 111000001000000000001000000000 "
" 011000010000000000001100100000 "
" 000000001100000000011001010000 "
" 101010010100000000000111001100 "
" 001000000000000000001000001001 "
" 000000000010000000000000100000 "
" 101011000110011011000001010001 "
" 100011111010000001000010001000 "
" 011010000000000101011111110010 "
" 000001110011111111111010100000 "
" 001110100111000101011001001100 "
" 011010010100110111100101011100 "
" 101101001001011111000110110111 "
" 110001110110110001000011001010 "
" 011100001000111100110111011110 "
" 010101011101100110111011100100 "
" 011001000011110011011110111010 "
} ,
2022-07-20 07:56:07 +12:00
/* 19*/ { UNICODE_MODE , 3 , - 1 , { 1 , 8 , " " } , " COMMISSION FOR EUROPEAN NORMALIZATION, RUE DE STASSART 36, B-1050 BRUXELLES " , - 1 , " B1050056999 " , 0 , 33 , 30 , 1 , " Mode 3 Structured Append " ,
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
" 010000000000001010000000010011 "
" 001000111111010000011111001000 "
" 101111111010101111101101000101 "
" 000001000000100010100001100010 "
" 111100110010001100101000001110 "
" 110100011010001101101000011100 "
" 100000000010001000000001011010 "
" 001100110101001001111111000010 "
" 011010001001100010110100000111 "
" 100100000111100000100101001000 "
" 000010100001110000010100101010 "
" 110010001000000011010000101000 "
" 100010111100000000100010001001 "
" 100000001100000000011000000000 "
" 001011100100000000011111100100 "
" 010111011000000000000011011010 "
" 001110101000000000001000001000 "
" 000001110000000000001011000000 "
" 000111010000000000011111111101 "
" 001100101000000000011100100010 "
" 011010111100000000001000100000 "
" 000010101110000000011110000110 "
" 111001101110000001111000000000 "
" 001000101011011001000101010000 "
" 000010010101010101010000111101 "
" 111000000000000000001110100000 "
" 001011101010101010101000100010 "
" 001100110110100101101100010110 "
" 111100110000110110000010011001 "
" 011100011110101010001100000000 "
" 011001100010001111111000101001 "
" 011111110000111010001010001100 "
" 110010001001001011011111100111 "
} ,
2020-06-05 05:45:25 +12:00
} ;
int data_size = ARRAY_SIZE ( data ) ;
2021-06-24 02:00:49 +12:00
int i , length , ret ;
struct zint_symbol * symbol ;
2020-06-05 05:45:25 +12:00
char escaped [ 1024 ] ;
2021-12-09 07:12:20 +13:00
char cmp_buf [ 8192 ] ;
char cmp_msg [ 1024 ] ;
2020-06-05 05:45:25 +12:00
2022-07-20 07:56:07 +12:00
int do_bwipp = ( debug & ZINT_DEBUG_TEST_BWIPP ) & & testUtilHaveGhostscript ( ) ; /* Only do BWIPP test if asked, too slow otherwise */
int do_zxingcpp = ( debug & ZINT_DEBUG_TEST_ZXINGCPP ) & & testUtilHaveZXingCPPDecoder ( ) ; /* Only do ZXing-C++ test if asked, too slow otherwise */
2021-06-24 02:00:49 +12:00
testStart ( " test_encode " ) ;
for ( i = 0 ; i < data_size ; i + + ) {
2020-06-05 05:45:25 +12:00
2022-09-13 06:26:04 +12:00
if ( testContinue ( p_ctx , i ) ) continue ;
2020-06-05 05:45:25 +12:00
2021-06-24 02:00:49 +12:00
symbol = ZBarcode_Create ( ) ;
2020-06-05 05:45:25 +12:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
2021-06-24 02:00:49 +12:00
length = testUtilSetSymbol ( symbol , BARCODE_MAXICODE , data [ i ] . input_mode , - 1 /*eci*/ , data [ i ] . option_1 , data [ i ] . option_2 , - 1 , - 1 /*output_options*/ , data [ i ] . data , data [ i ] . length , debug ) ;
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
if ( data [ i ] . structapp . count ) {
symbol - > structapp = data [ i ] . structapp ;
}
2020-06-05 05:45:25 +12:00
strcpy ( symbol - > primary , data [ i ] . primary ) ;
2020-10-04 10:51:08 +13:00
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
2020-06-05 05:45:25 +12:00
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
2022-09-13 06:26:04 +12:00
if ( p_ctx - > generate ) {
Add Structured Append support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, MAXICODE, MICROPDF417, PDF417, QRCODE, ULTRA
DOTCODE: use pre-calculated generator poly coeffs in Reed-Solomon for
performance improvement
PDF417/MICROPDF417: use common routine pdf417_initial()
GUI: code lines <= 118, shorthand widget_obj(),
shorten calling upcean_addon_gap(), upcean_guard_descent()
various backend: var name debug -> debug_print
2021-09-29 09:42:44 +13:00
printf ( " /*%3d*/ { %s, %d, %d, { %d, %d, \" %s \" }, \" %s \" , %d, \" %s \" , %s, %d, %d, %d, \" %s \" , \n " ,
i , testUtilInputModeName ( data [ i ] . input_mode ) , data [ i ] . option_1 , data [ i ] . option_2 ,
data [ i ] . structapp . index , data [ i ] . structapp . count , data [ i ] . structapp . id ,
testUtilEscape ( data [ i ] . data , length , escaped , sizeof ( escaped ) ) , data [ i ] . length ,
2021-03-29 09:31:45 +13:00
data [ i ] . primary , testUtilErrorName ( data [ i ] . ret ) , symbol - > rows , symbol - > width , data [ i ] . bwipp_cmp , data [ i ] . comment ) ;
2021-02-23 13:01:15 +13:00
testUtilModulesPrint ( symbol , " " , " \n " ) ;
2020-06-05 05:45:25 +12:00
printf ( " }, \n " ) ;
} else {
2021-02-23 13:01:15 +13:00
if ( ret < ZINT_ERROR ) {
2021-06-24 02:00:49 +12:00
int width , row ;
2020-06-05 05:45:25 +12:00
assert_equal ( symbol - > rows , data [ i ] . expected_rows , " i:%d symbol->rows %d != %d (%s) \n " , i , symbol - > rows , data [ i ] . expected_rows , data [ i ] . data ) ;
assert_equal ( symbol - > width , data [ i ] . expected_width , " i:%d symbol->width %d != %d (%s) \n " , i , symbol - > width , data [ i ] . expected_width , data [ i ] . data ) ;
2020-12-20 06:13:35 +13:00
ret = testUtilModulesCmp ( symbol , data [ i ] . expected , & width , & row ) ;
assert_zero ( ret , " i:%d testUtilModulesCmp ret %d != 0 width %d row %d (%s) \n " , i , ret , width , row , data [ i ] . data ) ;
2021-03-29 09:31:45 +13:00
if ( do_bwipp & & testUtilCanBwipp ( i , symbol , data [ i ] . option_1 , data [ i ] . option_2 , - 1 , debug ) ) {
if ( ! data [ i ] . bwipp_cmp ) {
if ( debug & ZINT_DEBUG_TEST_PRINT ) printf ( " i:%d %s not BWIPP compatible (%s) \n " , i , testUtilBarcodeName ( symbol - > symbology ) , data [ i ] . comment ) ;
} else {
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
ret = testUtilBwipp ( i , symbol , data [ i ] . option_1 , data [ i ] . option_2 , - 1 , data [ i ] . data , length , data [ i ] . primary , cmp_buf , sizeof ( cmp_buf ) , NULL ) ;
2021-03-29 09:31:45 +13:00
assert_zero ( ret , " i:%d %s testUtilBwipp ret %d != 0 \n " , i , testUtilBarcodeName ( symbol - > symbology ) , ret ) ;
2021-12-09 07:12:20 +13:00
ret = testUtilBwippCmp ( symbol , cmp_msg , cmp_buf , data [ i ] . expected ) ;
2021-03-29 09:31:45 +13:00
assert_zero ( ret , " i:%d %s testUtilBwippCmp %d != 0 %s \n actual: %s \n expected: %s \n " ,
2021-12-09 07:12:20 +13:00
i , testUtilBarcodeName ( symbol - > symbology ) , ret , cmp_msg , cmp_buf , data [ i ] . expected ) ;
2021-03-29 09:31:45 +13:00
}
}
2022-04-10 22:12:18 +12:00
if ( do_zxingcpp & & testUtilCanZXingCPP ( i , symbol , data [ i ] . data , length , debug ) ) {
2021-12-09 07:12:20 +13:00
int cmp_len , ret_len ;
char modules_dump [ 17984 + 1 ] ;
assert_notequal ( testUtilModulesDump ( symbol , modules_dump , sizeof ( modules_dump ) ) , - 1 , " i:%d testUtilModulesDump == -1 \n " , i ) ;
2022-04-10 22:12:18 +12:00
ret = testUtilZXingCPP ( i , symbol , data [ i ] . data , length , modules_dump , cmp_buf , sizeof ( cmp_buf ) , & cmp_len ) ;
2021-12-09 07:12:20 +13:00
assert_zero ( ret , " i:%d %s testUtilZXingCPP ret %d != 0 \n " , i , testUtilBarcodeName ( symbol - > symbology ) , ret ) ;
ret = testUtilZXingCPPCmp ( symbol , cmp_msg , cmp_buf , cmp_len , data [ i ] . data , length , data [ i ] . primary , escaped , & ret_len ) ;
assert_zero ( ret , " i:%d %s testUtilZXingCPPCmp %d != 0 %s \n actual: %.*s \n expected: %.*s \n " ,
i , testUtilBarcodeName ( symbol - > symbology ) , ret , cmp_msg , cmp_len , cmp_buf , ret_len , escaped ) ;
}
2020-06-05 05:45:25 +12:00
}
}
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2022-09-13 06:26:04 +12:00
static void test_encode_segs ( const testCtx * const p_ctx ) {
int debug = p_ctx - > debug ;
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
struct item {
int input_mode ;
int option_1 ;
int option_2 ;
struct zint_structapp structapp ;
struct zint_seg segs [ 3 ] ;
char * primary ;
int ret ;
int expected_rows ;
int expected_width ;
int bwipp_cmp ;
char * comment ;
char * expected ;
} ;
struct item data [ ] = {
/* 0*/ { UNICODE_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " ¶ " ) , - 1 , 0 } , { TU ( " Ж " ) , - 1 , 7 } , { TU ( " " ) , 0 , 0 } } , " " , 0 , 33 , 30 , 1 , " ISO 16023:2000 4.15.4 example " ,
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101010 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101010011010100000101010100 "
" 000000000011111110001000000000 "
" 101010101110000000101010101010 "
" 010101110110000000110101010110 "
" 000000110000000000100100000000 "
" 101010011000000000010010101000 "
" 010101111000000000001001010110 "
" 000000001000000000001000000010 "
" 101010001000000000001110101000 "
" 010101111100000000000001010111 "
" 000000010000000000110100000010 "
" 101010000110000000010110101011 "
" 010101011010000001110001010100 "
" 000000000010110101000100000011 "
" 101010100111110001001110101010 "
" 010101010101010101011111010111 "
" 000000000000000000001111010110 "
" 101010101010101010100000000010 "
" 111111110000111100000101000000 "
" 010110101111000011110101010100 "
" 101010100000010101011111101010 "
" 111101011010000011110101101010 "
" 010110101111010110101010111100 "
" 010100000000010110101010010100 "
} ,
/* 1*/ { UNICODE_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " ¶ " ) , - 1 , 0 } , { TU ( " Ж " ) , - 1 , 0 } , { TU ( " " ) , 0 , 0 } } , " " , ZINT_WARN_USES_ECI , 33 , 30 , 1 , " ISO 16023:2000 4.15.4 example auto-ECI " ,
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101010 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101010011010100000101010100 "
" 000000000011111110001000000000 "
" 101010101110000000101010101010 "
" 010101110110000000110101010110 "
" 000000110000000000100100000000 "
" 101010011000000000010010101000 "
" 010101111000000000001001010110 "
" 000000001000000000001000000010 "
" 101010001000000000001110101000 "
" 010101111100000000000001010111 "
" 000000010000000000110100000010 "
" 101010000110000000010110101011 "
" 010101011010000001110001010100 "
" 000000000010110101000100000011 "
" 101010100111110001001110101010 "
" 010101010101010101011111010111 "
" 000000000000000000001111010110 "
" 101010101010101010100000000010 "
" 111111110000111100000101000000 "
" 010110101111000011110101010100 "
" 101010100000010101011111101010 "
" 111101011010000011110101101010 "
" 010110101111010110101010111100 "
" 010100000000010110101010010100 "
} ,
/* 2*/ { UNICODE_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " Ж " ) , - 1 , 7 } , { TU ( " ¶ " ) , - 1 , 0 } , { TU ( " " ) , 0 , 0 } } , " " , 0 , 33 , 30 , 1 , " ISO 16023:2000 4.15.4 example inverted " ,
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101010 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101010011000000110101010100 "
" 000000000111100010011000000000 "
" 101010100110000000011010101010 "
" 010101010110000000110101010110 "
" 000000000000000000111100000000 "
" 101010101000000000001110101000 "
" 010101110000000000001101010110 "
" 000000001000000000001000000010 "
" 101010111000000000001110101000 "
" 010101101000000000010101010111 "
" 000000100100000000111000000010 "
" 101010011010000000110110101011 "
" 010101010110000001111001010100 "
" 000000001010101111101100000011 "
" 101010101110010101110010101010 "
" 010101010101010101011111010111 "
" 000000000000000000001111010110 "
" 101010101010101010100000000010 "
" 111111110000111100000101000000 "
" 010110101111000011110101010100 "
" 101010100000010101011111101010 "
" 111101011010000011110101101010 "
" 010110101111010110101010111100 "
" 010100000000010110101010010100 "
} ,
/* 3*/ { UNICODE_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " Ж " ) , - 1 , 0 } , { TU ( " ¶ " ) , - 1 , 0 } , { TU ( " " ) , 0 , 0 } } , " " , ZINT_WARN_USES_ECI , 33 , 30 , 1 , " ISO 16023:2000 4.15.4 example inverted auto-ECI " ,
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101010 "
" 010101010101010101010101010110 "
" 000000000000000000000000000001 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101010011000000110101010100 "
" 000000000111100010011000000000 "
" 101010100110000000011010101010 "
" 010101010110000000110101010110 "
" 000000000000000000111100000000 "
" 101010101000000000001110101000 "
" 010101110000000000001101010110 "
" 000000001000000000001000000010 "
" 101010111000000000001110101000 "
" 010101101000000000010101010111 "
" 000000100100000000111000000010 "
" 101010011010000000110110101011 "
" 010101010110000001111001010100 "
" 000000001010101111101100000011 "
" 101010101110010101110010101010 "
" 010101010101010101011111010111 "
" 000000000000000000001111010110 "
" 101010101010101010100000000010 "
" 111111110000111100000101000000 "
" 010110101111000011110101010100 "
" 101010100000010101011111101010 "
" 111101011010000011110101101010 "
" 010110101111010110101010111100 "
" 010100000000010110101010010100 "
} ,
/* 4*/ { UNICODE_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " Pixel 4a 128 GB:$439.97 " ) , - 1 , 3 } , { TU ( " Pixel 4a 128 GB:￥3149.79 " ) , - 1 , 29 } , { TU ( " Pixel 4a 128 GB:444,90 € " ) , - 1 , 17 } } , " " , 0 , 33 , 30 , 0 , " AIM ITS/04-023:2022 Annex A example (shortened) " ,
" 011100110111111101000011011111 "
" 001000110000000100100001101000 "
" 000010110010010000110101000010 "
" 110000100011101010111101111100 "
" 011110010111001101100111010010 "
" 000010001011001011111001101100 "
" 011100110111111101000011110111 "
" 001000110000000100100001111000 "
" 000010110010010000110101011110 "
" 011111110011001000000111011100 "
" 110110000101000110011000011110 "
" 011000100000000000101011000100 "
" 111110101110000000011110101100 "
" 100101100100000000001100001100 "
" 111011100000000000000110001101 "
" 011100010000000000000000100010 "
" 000111001000000000001010010110 "
" 000000110000000000001010001010 "
" 110011010100000000011001111111 "
" 100011101100000000111000000000 "
" 001011100010000000011000100100 "
" 111111000010000001111000011110 "
" 101001000110101011100010000110 "
" 000001010110011101000111000010 "
" 110111110111010101010010100001 "
" 101101000011010000000001011000 "
" 000010000001001010100100111001 "
" 101010010101100010111000111000 "
" 000111001101011101010101101000 "
" 110111101110001101100111010100 "
" 101000010100101000011010011110 "
" 100000110001100001110001101000 "
" 010000101110100111010101100101 "
} ,
/* 5*/ { UNICODE_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " $439.97 " ) , - 1 , 3 } , { TU ( " ￥3149.79 " ) , - 1 , 29 } , { TU ( " 444,90 € " ) , - 1 , 17 } } , " " , 0 , 33 , 30 , 1 , " AIM ITS/04-023:2022 Annex A example price only " ,
" 101011011101111111110111111011 "
" 011111101101000010011110010100 "
" 111001110100111000100111101110 "
" 010101010111011111011111111010 "
" 000000000111000001111010100011 "
" 101010100001000010000000001010 "
" 010101010101010101010101010111 "
" 000000000000000000000000000010 "
" 101010101010101010101010101000 "
" 010101010111001100100001010100 "
" 000000001001000110011100000010 "
" 101010100010000000011110101010 "
" 010101011110000000001101010100 "
" 000000101000000000010000000000 "
" 101010001100000000000110101000 "
" 010101111000000000001001010110 "
" 000000101000000000001000000010 "
" 101010011000000000001110101010 "
" 010101110100000000001101010101 "
" 000000001000000000011000000000 "
" 101010010010000000101010101000 "
" 010101010100000001111101010100 "
" 000000000110101111101000000011 "
" 101010100110011101000110101000 "
" 010101010101010101011001001110 "
" 000000000000000000000000000100 "
" 101010101010101010100101100101 "
" 001001110101111010110011011100 "
" 001100001100101000100101110110 "
" 011101100101000100110011000100 "
" 000100101101010011010011101111 "
" 010111011011100000011000101000 "
" 001111010010000100010110011110 "
} ,
/* 6*/ { DATA_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " \266 " ) , 1 , 0 } , { TU ( " \266 " ) , 1 , 7 } , { TU ( " \266 " ) , 1 , 0 } } , " " , 0 , 33 , 30 , 1 , " Standard example + extra seg, data mode " ,
" 010101010101010101010101010111 "
" 110000000000000000000000000010 "
" 111010101010101010101010101011 "
" 010101010101010101010101010110 "
" 000000000000000000000000000000 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000010 "
" 101010101010101010101010101001 "
" 010101010011010100111101010110 "
" 000000000011111110000100000010 "
" 101010100010000000111010101010 "
" 010101001110000000110001010100 "
" 000000001100000000101000000000 "
" 101010000100000000010010101000 "
" 010101011000000000001101010110 "
" 000000001000000000001000000010 "
" 101010001000000000001010101000 "
" 010101001000000000000001010101 "
" 000000111100000000110100000000 "
" 101010011010000000011010101000 "
" 010101011010000001010101010100 "
" 000000001010110101000100000011 "
" 101010101111110001011110101010 "
" 010101010101010101010011100111 "
" 000000000000000000000111010110 "
" 101010101010101010100100000010 "
" 110011010010110000000111001110 "
" 011010011101001011010111010101 "
" 101010000011010101001111100110 "
" 001110010010000001111001111010 "
" 000111101111000100101110001100 "
" 000100001000100111100110010100 "
} ,
/* 7*/ { UNICODE_MODE , - 1 , - 1 , { 0 , 0 , " " } , { { TU ( " αβ " ) , - 1 , 0 } , { TU ( " ÿ " ) , - 1 , 0 } , { TU ( " 貫やぐ禁 " ) , - 1 , 20 } } , " " , ZINT_WARN_USES_ECI , 33 , 30 , 1 , " Auto-ECI " ,
" 011010110111101111110011111111 "
" 100110111111001100110011001110 "
" 001100101100100001100100010111 "
" 010101010101010101101111110100 "
" 000000000000000000101100111110 "
" 101010101010101010010000100110 "
" 010101010101010101010101010111 "
" 000000000000000000000000000000 "
" 101010101010101010101010101000 "
" 010101010111000000110101010100 "
" 000000000011010010001100000010 "
" 101010101100000000111010101010 "
" 010101101100000000110101010110 "
" 000000011100000000011100000000 "
" 101010001000000000011110101000 "
" 010101011000000000001101010110 "
" 000000001000000000001000000011 "
" 101010001000000000001010101010 "
" 010101010000000000001001010100 "
" 000000010100000000000000000000 "
" 101010110010000000110110101000 "
" 010101010010000001110101010110 "
" 000000000010101011100100000001 "
" 101010101011010001100010101000 "
" 010101010101010101011010000110 "
" 000000000000000000001001001100 "
" 101010101010101010100101111110 "
" 110111000101110010100001011100 "
" 111110011010010010000011001011 "
" 111000110110111111111000010100 "
" 101001001111001011110110101001 "
" 101010010100011001011101100110 "
" 111011110000111001101101111000 "
} ,
/* 8*/ { UNICODE_MODE , - 1 , - 1 , { 1 , 2 , " " } , { { TU ( " αβ " ) , - 1 , 9 } , { TU ( " ÿ " ) , - 1 , 3 } , { TU ( " 貫やぐ禁 " ) , - 1 , 20 } } , " " , 0 , 33 , 30 , 1 , " Structured Append " ,
" 001101101011011110111111001111 "
" 001110011011111100110011001110 "
" 111000110010110010000110010011 "
" 010101010101011011111101111110 "
" 000000000000001011001111110011 "
" 101010101010100100001001010100 "
" 010101010101010101010101010111 "
" 000000000000000000000000000010 "
" 101010101010101010101010101011 "
" 010101010011000000111101010110 "
" 000000001101000010010000000011 "
" 101010101010000000100010101000 "
" 010101111000000000111101010111 "
" 000000000100000000100000000000 "
" 101010001100000000011010101010 "
" 010101011000000000000101010110 "
" 000000001000000000001000000000 "
" 101010001000000000001110101000 "
" 010101100000000000011001010100 "
" 000000111000000000001000000010 "
" 101010100110000000010110101011 "
" 010101011010000000001001010110 "
" 000000001010011011100000000010 "
" 101010101011000001000010101000 "
" 010101010101010101011111010011 "
" 000000000000000000000100001000 "
" 101010101010101010100101111111 "
" 111101010111011110110011111100 "
" 000011111110111101111100110001 "
" 001101101111000110000011100010 "
" 111110010111110110000111100100 "
" 101010011010110110110010010100 "
" 100101010111100011100010101000 "
} ,
} ;
int data_size = ARRAY_SIZE ( data ) ;
int i , j , seg_count , ret ;
struct zint_symbol * symbol ;
char escaped [ 1024 ] ;
char cmp_buf [ 8192 ] ;
char cmp_msg [ 1024 ] ;
2022-07-20 07:56:07 +12:00
int do_bwipp = ( debug & ZINT_DEBUG_TEST_BWIPP ) & & testUtilHaveGhostscript ( ) ; /* Only do BWIPP test if asked, too slow otherwise */
int do_zxingcpp = ( debug & ZINT_DEBUG_TEST_ZXINGCPP ) & & testUtilHaveZXingCPPDecoder ( ) ; /* Only do ZXing-C++ test if asked, too slow otherwise */
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
testStart ( " test_encode_segs " ) ;
for ( i = 0 ; i < data_size ; i + + ) {
2022-09-13 06:26:04 +12:00
if ( testContinue ( p_ctx , i ) ) continue ;
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
symbol = ZBarcode_Create ( ) ;
assert_nonnull ( symbol , " Symbol not created \n " ) ;
testUtilSetSymbol ( symbol , BARCODE_MAXICODE , data [ i ] . input_mode , - 1 /*eci*/ ,
data [ i ] . option_1 , data [ i ] . option_2 , - 1 , - 1 /*output_options*/ , NULL , 0 , debug ) ;
if ( data [ i ] . structapp . count ) {
symbol - > structapp = data [ i ] . structapp ;
}
strcpy ( symbol - > primary , data [ i ] . primary ) ;
for ( j = 0 , seg_count = 0 ; j < 3 & & data [ i ] . segs [ j ] . length ; j + + , seg_count + + ) ;
ret = ZBarcode_Encode_Segs ( symbol , data [ i ] . segs , seg_count ) ;
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode_Segs ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
2022-09-13 06:26:04 +12:00
if ( p_ctx - > generate ) {
Add multiple segments support for AZTEC, CODEONE, DATAMATRIX, DOTCODE,
GRIDMATRIX, HANXIN, MAXICODE, MICROPDF417, PDF417, QRCODE, RMQR, ULTRA
RMQR: fix ECI encoding (wrong bit length for indicator)
MICROQR: check versions M1 and M2 for allowed characters so as to give
better error messages
DOTCODE: some small optimizations
common.c: add is_chr(), segs_length(), segs_cpy()
CODEONE/CODE128/DOTCODE/GRIDMATRIX/HANXIN/MAXICODE/QRCODE/ULTRA: add
namespace prefixes to static funcs/data
includes: use Z_ prefix, unuse double underscore prefixes (guard defines)
manual.txt: compress some tables using double/treble column sets
2022-05-10 06:50:50 +12:00
char escaped1 [ 4096 ] ;
char escaped2 [ 4096 ] ;
int length = data [ i ] . segs [ 0 ] . length = = - 1 ? ( int ) ustrlen ( data [ i ] . segs [ 0 ] . source ) : data [ i ] . segs [ 0 ] . length ;
int length1 = data [ i ] . segs [ 1 ] . length = = - 1 ? ( int ) ustrlen ( data [ i ] . segs [ 1 ] . source ) : data [ i ] . segs [ 1 ] . length ;
int length2 = data [ i ] . segs [ 2 ] . length = = - 1 ? ( int ) ustrlen ( data [ i ] . segs [ 2 ] . source ) : data [ i ] . segs [ 2 ] . length ;
printf ( " /*%3d*/ { %s, %d, %d, { %d, %d, \" %s \" }, { { TU( \" %s \" ), %d, %d }, { TU( \" %s \" ), %d, %d }, { TU( \" %s \" ), %d, %d } }, \" %s \" , %s, %d, %d, %d, \" %s \" , \n " ,
i , testUtilInputModeName ( data [ i ] . input_mode ) , data [ i ] . option_1 , data [ i ] . option_2 ,
data [ i ] . structapp . index , data [ i ] . structapp . count , data [ i ] . structapp . id ,
testUtilEscape ( ( const char * ) data [ i ] . segs [ 0 ] . source , length , escaped , sizeof ( escaped ) ) , data [ i ] . segs [ 0 ] . length , data [ i ] . segs [ 0 ] . eci ,
testUtilEscape ( ( const char * ) data [ i ] . segs [ 1 ] . source , length1 , escaped1 , sizeof ( escaped1 ) ) , data [ i ] . segs [ 1 ] . length , data [ i ] . segs [ 1 ] . eci ,
testUtilEscape ( ( const char * ) data [ i ] . segs [ 2 ] . source , length2 , escaped2 , sizeof ( escaped2 ) ) , data [ i ] . segs [ 2 ] . length , data [ i ] . segs [ 2 ] . eci ,
data [ i ] . primary , testUtilErrorName ( data [ i ] . ret ) , symbol - > rows , symbol - > width , data [ i ] . bwipp_cmp , data [ i ] . comment ) ;
testUtilModulesPrint ( symbol , " " , " \n " ) ;
printf ( " }, \n " ) ;
} else {
if ( ret < ZINT_ERROR ) {
int width , row ;
assert_equal ( symbol - > rows , data [ i ] . expected_rows , " i:%d symbol->rows %d != %d \n " , i , symbol - > rows , data [ i ] . expected_rows ) ;
assert_equal ( symbol - > width , data [ i ] . expected_width , " i:%d symbol->width %d != %d \n " , i , symbol - > width , data [ i ] . expected_width ) ;
ret = testUtilModulesCmp ( symbol , data [ i ] . expected , & width , & row ) ;
assert_zero ( ret , " i:%d testUtilModulesCmp ret %d != 0 width %d row %d \n " , i , ret , width , row ) ;
if ( do_bwipp & & testUtilCanBwipp ( i , symbol , data [ i ] . option_1 , data [ i ] . option_2 , - 1 , debug ) ) {
if ( ! data [ i ] . bwipp_cmp ) {
if ( debug & ZINT_DEBUG_TEST_PRINT ) printf ( " i:%d %s not BWIPP compatible (%s) \n " , i , testUtilBarcodeName ( symbol - > symbology ) , data [ i ] . comment ) ;
} else {
ret = testUtilBwippSegs ( i , symbol , - 1 , data [ i ] . option_2 , - 1 , data [ i ] . segs , seg_count , NULL , cmp_buf , sizeof ( cmp_buf ) ) ;
assert_zero ( ret , " i:%d %s testUtilBwippSegs ret %d != 0 \n " , i , testUtilBarcodeName ( symbol - > symbology ) , ret ) ;
ret = testUtilBwippCmp ( symbol , cmp_msg , cmp_buf , data [ i ] . expected ) ;
assert_zero ( ret , " i:%d %s testUtilBwippCmp %d != 0 %s \n actual: %s \n expected: %s \n " ,
i , testUtilBarcodeName ( symbol - > symbology ) , ret , cmp_msg , cmp_buf , data [ i ] . expected ) ;
}
}
if ( do_zxingcpp & & testUtilCanZXingCPP ( i , symbol , ( const char * ) data [ i ] . segs [ 0 ] . source , data [ i ] . segs [ 0 ] . length , debug ) ) {
if ( data [ i ] . input_mode = = DATA_MODE ) {
if ( debug & ZINT_DEBUG_TEST_PRINT ) {
printf ( " i:%d multiple segments in DATA_MODE not currently supported for ZXing-C++ testing (%s) \n " ,
i , testUtilBarcodeName ( symbol - > symbology ) ) ;
}
} else {
int cmp_len , ret_len ;
char modules_dump [ 17984 + 1 ] ;
assert_notequal ( testUtilModulesDump ( symbol , modules_dump , sizeof ( modules_dump ) ) , - 1 , " i:%d testUtilModulesDump == -1 \n " , i ) ;
ret = testUtilZXingCPP ( i , symbol , ( const char * ) data [ i ] . segs [ 0 ] . source , data [ i ] . segs [ 0 ] . length ,
modules_dump , cmp_buf , sizeof ( cmp_buf ) , & cmp_len ) ;
assert_zero ( ret , " i:%d %s testUtilZXingCPP ret %d != 0 \n " , i , testUtilBarcodeName ( symbol - > symbology ) , ret ) ;
ret = testUtilZXingCPPCmpSegs ( symbol , cmp_msg , cmp_buf , cmp_len , data [ i ] . segs , seg_count ,
data [ i ] . primary , escaped , & ret_len ) ;
assert_zero ( ret , " i:%d %s testUtilZXingCPPCmpSegs %d != 0 %s \n actual: %.*s \n expected: %.*s \n " ,
i , testUtilBarcodeName ( symbol - > symbology ) , ret , cmp_msg , cmp_len , cmp_buf , ret_len , escaped ) ;
}
}
}
}
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2022-09-13 06:26:04 +12:00
static void test_best_supported_set ( const testCtx * const p_ctx ) {
int debug = p_ctx - > debug ;
2019-09-02 08:09:47 +12:00
struct item {
2020-10-04 10:51:08 +13:00
char * data ;
2019-09-02 08:09:47 +12:00
int ret ;
float w ;
float h ;
2019-10-14 21:49:15 +13:00
int ret_vector ;
2019-09-02 08:09:47 +12:00
int expected_rows ;
int expected_width ;
2020-05-06 09:28:25 +12:00
char * comment ;
2020-10-04 10:51:08 +13:00
char * expected ;
2019-09-02 08:09:47 +12:00
} ;
struct item data [ ] = {
2020-12-20 06:13:35 +13:00
/* 0*/ { " am.//ab, \034 TA# z \015 ! " , 0 , 100 , 100 , 0 , 33 , 30 , " Different encodation than BWIPP, same number of codewords " ,
2019-09-02 08:09:47 +12:00
" 111010000101111000111101010111 "
" 111110000000010100111000000000 "
" 110000101100110100111010101011 "
" 010101010101010101010101010100 "
" 000000000000000000000000000000 "
" 101010101010101010101010101000 "
" 010101010101010101010101010110 "
" 000000000000000000000000000000 "
" 101010101010101010101010101011 "
" 010101010111001100000101010110 "
" 000000001011000010000000000010 "
" 101010101100000000100110101010 "
" 010101001100000000101101010101 "
" 000000100000000000010000000010 "
" 101010110000000000010010101010 "
" 010101011000000000000101010110 "
" 000000001000000000001000000010 "
" 101010001000000000001010101000 "
" 010101010000000000001101010101 "
" 000000001100000000000000000010 "
" 101010110010000000010110101010 "
" 010101010100000001111001010100 "
" 000000001110110111111100000011 "
" 101010100110111101011010101010 "
" 010101010101010101010011101000 "
" 000000000000000000001101100000 "
" 101010101010101010100000100110 "
" 101001001101110001001011010000 "
" 100100110110001010011000011100 "
" 011011000001011011100100100110 "
" 111001100000101101000111001000 "
" 111100000110000011011101001110 "
" 010100101001110111101010110010 "
} ,
} ;
2021-02-23 13:01:15 +13:00
int data_size = ARRAY_SIZE ( data ) ;
2021-06-24 02:00:49 +12:00
int i , length , ret ;
struct zint_symbol * symbol ;
2019-09-02 08:09:47 +12:00
2019-10-14 21:49:15 +13:00
char escaped_data [ 1024 ] ;
2021-06-24 02:00:49 +12:00
testStart ( " test_best_supported_set " ) ;
for ( i = 0 ; i < data_size ; i + + ) {
2019-09-02 08:09:47 +12:00
2022-09-13 06:26:04 +12:00
if ( testContinue ( p_ctx , i ) ) continue ;
2020-05-06 09:28:25 +12:00
2021-06-24 02:00:49 +12:00
symbol = ZBarcode_Create ( ) ;
2019-09-02 08:09:47 +12:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
2021-06-24 02:00:49 +12:00
length = testUtilSetSymbol ( symbol , BARCODE_MAXICODE , - 1 /*input_mode*/ , - 1 /*eci*/ , - 1 /*option_1*/ , - 1 , - 1 , - 1 /*output_options*/ , data [ i ] . data , - 1 , debug ) ;
2019-09-02 08:09:47 +12:00
2020-10-04 10:51:08 +13:00
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
2019-10-14 21:49:15 +13:00
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d \n " , i , ret , data [ i ] . ret ) ;
2019-09-02 08:09:47 +12:00
2022-09-13 06:26:04 +12:00
if ( p_ctx - > generate ) {
2020-05-06 09:28:25 +12:00
printf ( " /*%2d*/ { \" %s \" , %d, %.0f, %.0f, %d, %d, %d, \" %s \" , \n " ,
i , testUtilEscape ( data [ i ] . data , length , escaped_data , sizeof ( escaped_data ) ) , ret ,
data [ i ] . w , data [ i ] . h , data [ i ] . ret_vector , symbol - > rows , symbol - > width , data [ i ] . comment ) ;
2021-02-23 13:01:15 +13:00
testUtilModulesPrint ( symbol , " " , " \n " ) ;
2020-05-06 09:28:25 +12:00
printf ( " }, \n " ) ;
} else {
2021-06-24 02:00:49 +12:00
int width , row ;
2020-05-06 09:28:25 +12:00
assert_equal ( symbol - > rows , data [ i ] . expected_rows , " i:%d symbol->rows %d != %d \n " , i , symbol - > rows , data [ i ] . expected_rows ) ;
assert_equal ( symbol - > width , data [ i ] . expected_width , " i:%d symbol->width %d != %d \n " , i , symbol - > width , data [ i ] . expected_width ) ;
ret = testUtilModulesCmp ( symbol , data [ i ] . expected , & width , & row ) ;
assert_zero ( ret , " i:%d testUtilModulesCmp ret %d != 0 width %d row %d \n " , i , ret , width , row ) ;
ret = ZBarcode_Buffer_Vector ( symbol , 0 ) ;
assert_equal ( ret , data [ i ] . ret_vector , " i:%d ZBarcode_Buffer_Vector ret %d != %d \n " , i , ret , data [ i ] . ret_vector ) ;
}
2019-09-02 08:09:47 +12:00
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2022-07-20 07:56:07 +12:00
/* #181 Nico Gunkel OSS-Fuzz */
2022-09-13 06:26:04 +12:00
static void test_fuzz ( const testCtx * const p_ctx ) {
int debug = p_ctx - > debug ;
2020-05-06 09:28:25 +12:00
2020-03-28 15:50:15 +13:00
struct item {
2020-12-20 06:13:35 +13:00
int eci ;
2020-10-04 10:51:08 +13:00
char * data ;
2020-03-28 15:50:15 +13:00
int length ;
int ret ;
} ;
2022-07-20 07:56:07 +12:00
/* s/\/\*[ 0-9]*\*\//\=printf("\/\*%3d*\/", line(".") - line("'<")): */
2020-03-28 15:50:15 +13:00
struct item data [ ] = {
2022-07-20 07:56:07 +12:00
/* 0*/ { - 1 , " \223 \223 \223 \223 \223 \200 \000 \060 \060 \020 \122 \104 \060 \343 \000 \000 \040 \104 \104 \104 \104 \177 \377 \040 \000 \324 \336 \000 \000 \000 \000 \104 \060 \060 \060 \060 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \104 \060 \104 \104 \000 \000 \000 \040 \104 \104 \104 \104 \177 \377 \377 \377 \324 \336 \000 \000 \000 \000 \104 \377 \104 \001 \104 \104 \104 \104 \104 \104 \233 \233 \060 \060 \060 \060 \060 \060 \060 \060 \060 \325 \074 " , 107 , ZINT_ERROR_TOO_LONG } , /* Original OSS-Fuzz triggering data */
/* 1*/ { - 1 , " AaAaAaAaAaAaAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA123456789 " , - 1 , ZINT_ERROR_TOO_LONG } , /* Add 6 lowercase a's so 6 SHIFTS inserted so 6 + 138 (max input len) = 144 and numbers come at end of buffer */
2020-12-20 06:13:35 +13:00
/* 2*/ { - 1 , " AaAaAaAaAaAaAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA123456789A " , - 1 , ZINT_ERROR_TOO_LONG } ,
/* 3*/ { - 1 , " 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789 " , - 1 , ZINT_ERROR_TOO_LONG } ,
/* 4*/ { 32768 , " 123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678 " , - 1 , ZINT_ERROR_TOO_LONG } ,
2021-03-29 09:31:45 +13:00
/* 5*/ { - 1 , " AaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAaAa " , - 1 , ZINT_ERROR_TOO_LONG } ,
2020-03-28 15:50:15 +13:00
} ;
2021-02-23 13:01:15 +13:00
int data_size = ARRAY_SIZE ( data ) ;
2021-06-24 02:00:49 +12:00
int i , length , ret ;
struct zint_symbol * symbol ;
testStart ( " test_fuzz " ) ;
2020-03-28 15:50:15 +13:00
2021-06-24 02:00:49 +12:00
for ( i = 0 ; i < data_size ; i + + ) {
2020-03-28 15:50:15 +13:00
2022-09-13 06:26:04 +12:00
if ( testContinue ( p_ctx , i ) ) continue ;
2020-05-06 09:28:25 +12:00
2021-06-24 02:00:49 +12:00
symbol = ZBarcode_Create ( ) ;
2020-03-28 15:50:15 +13:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
2021-06-24 02:00:49 +12:00
length = testUtilSetSymbol ( symbol , BARCODE_MAXICODE , - 1 /*input_mode*/ , data [ i ] . eci , - 1 /*option_1*/ , - 1 , - 1 , - 1 /*output_options*/ , data [ i ] . data , data [ i ] . length , debug ) ;
2020-03-28 15:50:15 +13:00
2020-10-04 10:51:08 +13:00
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
2020-03-28 15:50:15 +13:00
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2020-12-20 06:13:35 +13:00
# include <time.h>
# define TEST_PERF_ITERATIONS 1000
2022-07-20 07:56:07 +12:00
/* Not a real test, just performance indicator */
2022-09-13 06:26:04 +12:00
static void test_perf ( const testCtx * const p_ctx ) {
int debug = p_ctx - > debug ;
2020-12-20 06:13:35 +13:00
struct item {
int symbology ;
int input_mode ;
int option_1 ;
int option_2 ;
char * data ;
char * primary ;
int ret ;
int expected_rows ;
int expected_width ;
char * comment ;
} ;
struct item data [ ] = {
/* 0*/ { BARCODE_MAXICODE , UNICODE_MODE | ESCAPE_MODE , - 1 , - 1 ,
" 1Z34567890 \\ GUPSN \\ G102562 \\ G034 \\ G \\ G1/1 \\ G \\ GY \\ G2201 Second St \\ GFt Myers \\ GFL \\ R \\ E " ,
" 339010000840001 " , 0 , 33 , 30 , " Mode 2 " } ,
} ;
int data_size = ARRAY_SIZE ( data ) ;
2021-06-24 02:00:49 +12:00
int i , length , ret ;
2020-12-20 06:13:35 +13:00
clock_t start , total_encode = 0 , total_buffer = 0 , diff_encode , diff_buffer ;
2021-06-24 02:00:49 +12:00
if ( ! ( debug & ZINT_DEBUG_TEST_PERFORMANCE ) ) { /* -d 256 */
return ;
}
for ( i = 0 ; i < data_size ; i + + ) {
int j ;
2020-12-20 06:13:35 +13:00
2022-09-13 06:26:04 +12:00
if ( testContinue ( p_ctx , i ) ) continue ;
2020-12-20 06:13:35 +13:00
diff_encode = diff_buffer = 0 ;
2021-06-24 02:00:49 +12:00
for ( j = 0 ; j < TEST_PERF_ITERATIONS ; j + + ) {
2020-12-20 06:13:35 +13:00
struct zint_symbol * symbol = ZBarcode_Create ( ) ;
assert_nonnull ( symbol , " Symbol not created \n " ) ;
2021-06-24 02:00:49 +12:00
length = testUtilSetSymbol ( symbol , data [ i ] . symbology , data [ i ] . input_mode , - 1 /*eci*/ , data [ i ] . option_1 , data [ i ] . option_2 , - 1 , - 1 /*output_options*/ , data [ i ] . data , - 1 , debug ) ;
2020-12-20 06:13:35 +13:00
strcpy ( symbol - > primary , data [ i ] . primary ) ;
start = clock ( ) ;
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
diff_encode + = clock ( ) - start ;
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
assert_equal ( symbol - > rows , data [ i ] . expected_rows , " i:%d symbol->rows %d != %d (%s) \n " , i , symbol - > rows , data [ i ] . expected_rows , data [ i ] . data ) ;
assert_equal ( symbol - > width , data [ i ] . expected_width , " i:%d symbol->width %d != %d (%s) \n " , i , symbol - > width , data [ i ] . expected_width , data [ i ] . data ) ;
start = clock ( ) ;
ret = ZBarcode_Buffer ( symbol , 0 /*rotate_angle*/ ) ;
diff_buffer + = clock ( ) - start ;
assert_zero ( ret , " i:%d ZBarcode_Buffer ret %d != 0 (%s) \n " , i , ret , symbol - > errtxt ) ;
ZBarcode_Delete ( symbol ) ;
}
printf ( " %s: diff_encode %gms, diff_buffer %gms \n " , data [ i ] . comment , diff_encode * 1000.0 / CLOCKS_PER_SEC , diff_buffer * 1000.0 / CLOCKS_PER_SEC ) ;
total_encode + = diff_encode ;
total_buffer + = diff_buffer ;
}
2022-09-13 06:26:04 +12:00
if ( p_ctx - > index ! = - 1 ) {
2020-12-20 06:13:35 +13:00
printf ( " totals: encode %gms, buffer %gms \n " , total_encode * 1000.0 / CLOCKS_PER_SEC , total_buffer * 1000.0 / CLOCKS_PER_SEC ) ;
}
}
2020-05-06 09:28:25 +12:00
int main ( int argc , char * argv [ ] ) {
2022-09-13 06:26:04 +12:00
testFunction funcs [ ] = { /* name, func */
{ " test_large " , test_large } ,
{ " test_input " , test_input } ,
{ " test_encode " , test_encode } ,
{ " test_encode_segs " , test_encode_segs } ,
{ " test_best_supported_set " , test_best_supported_set } ,
{ " test_fuzz " , test_fuzz } ,
{ " test_perf " , test_perf } ,
2020-05-06 09:28:25 +12:00
} ;
testRun ( argc , argv , funcs , ARRAY_SIZE ( funcs ) ) ;
2019-09-02 08:09:47 +12:00
testReport ( ) ;
return 0 ;
}
2022-04-10 22:12:18 +12:00
/* vim: set ts=4 sw=4 et : */
