zint/backend/emf.c

858 lines
34 KiB
C
Raw Normal View History

/* emf.c - Support for Microsoft Enhanced Metafile Format */
/*
libzint - the open source barcode library
Copyright (C) 2016-2022 Robin Stuart <rstuart114@gmail.com>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
2017-10-24 08:37:52 +13:00
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
2017-10-24 08:37:52 +13:00
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
2017-10-24 08:37:52 +13:00
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
2017-10-24 08:37:52 +13:00
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
/* Developed according to [MS-EMF] - v20160714, Released July 14, 2016
* and [MS-WMF] - v20160714, Released July 14, 2016 */
#include <errno.h>
#include <stdio.h>
#include <assert.h>
#include <math.h>
#ifdef _MSC_VER
#include <io.h>
#include <fcntl.h>
#endif
#include "common.h"
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
#include "output.h"
#include "emf.h"
/* Multiply truncating to 3 decimal places (avoids rounding differences on various platforms) */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
#define mul3dpf(m, arg) stripf(roundf(m * arg * 1000.0) / 1000.0f)
static int count_rectangles(struct zint_symbol *symbol) {
int rectangles = 0;
struct zint_vector_rect *rect;
2017-10-24 08:37:52 +13:00
rect = symbol->vector->rectangles;
while (rect) {
rectangles++;
rect = rect->next;
}
2017-10-24 08:37:52 +13:00
return rectangles;
}
static int count_circles(struct zint_symbol *symbol) {
int circles = 0;
struct zint_vector_circle *circ;
2017-10-24 08:37:52 +13:00
circ = symbol->vector->circles;
while (circ) {
circles++;
circ = circ->next;
}
2017-10-24 08:37:52 +13:00
/* Hack for MaxiCode */
return symbol->symbology == BARCODE_MAXICODE ? circles * 2 : circles;
}
static int count_hexagons(struct zint_symbol *symbol) {
int hexagons = 0;
struct zint_vector_hexagon *hex;
2017-10-24 08:37:52 +13:00
hex = symbol->vector->hexagons;
while (hex) {
hexagons++;
hex = hex->next;
}
2017-10-24 08:37:52 +13:00
return hexagons;
}
static int count_strings(struct zint_symbol *symbol, float *fsize, float *fsize2, int *halign, int *halign1,
int *halign2) {
int strings = 0;
struct zint_vector_string *str;
*fsize = *fsize2 = 0.0f;
*halign = *halign1 = *halign2 = 0;
str = symbol->vector->strings;
while (str) {
/* Allow 2 font sizes */
if (*fsize == 0.0f) {
*fsize = str->fsize;
} else if (str->fsize != *fsize && *fsize2 == 0.0f) {
*fsize2 = str->fsize;
}
/* Only 3 haligns possible */
if (str->halign) {
if (str->halign == 1) {
*halign1 = str->halign;
} else {
*halign2 = str->halign;
}
}
strings++;
str = str->next;
}
return strings;
}
static void utfle_copy(unsigned char *output, unsigned char *input, int length) {
int i;
int o;
2017-10-24 08:37:52 +13:00
/* Convert UTF-8 to UTF-16LE - only needs to handle characters <= U+00FF */
i = 0;
o = 0;
do {
if (input[i] <= 0x7f) {
/* 1 byte mode (7-bit ASCII) */
output[o] = input[i];
output[o + 1] = 0x00;
o += 2;
i++;
} else {
/* 2 byte mode */
output[o] = ((input[i] & 0x1f) << 6) + (input[i + 1] & 0x3f);
output[o + 1] = 0x00;
o += 2;
i += 2;
}
} while (i < length);
}
static int bump_up(int input) {
/* Strings length must be a multiple of 4 bytes */
if ((input & 1) == 1) {
input++;
}
return input;
}
static int utfle_length(unsigned char *input, int length) {
int result = 0;
int i;
for (i = 0; i < length; i++) {
result++;
if (input[i] >= 0x80) { /* 2 byte UTF-8 counts as one UTF-16LE character */
i++;
}
}
return result;
}
INTERNAL int emf_plot(struct zint_symbol *symbol, int rotate_angle) {
int i;
FILE *emf_file;
int fgred, fggrn, fgblu, bgred, bggrn, bgblu;
int error_number = 0;
int rectangle_count, this_rectangle;
int circle_count, this_circle;
int hexagon_count, this_hexagon;
int string_count, this_text;
int bytecount, recordcount;
float previous_diameter;
float radius, half_radius, half_sqrt3_radius;
2020-01-14 08:24:01 +13:00
int colours_used = 0;
int rectangle_bycolour[9] = {0};
int width, height;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
int bounds_pxx, bounds_pxy; /* Pixels */
int frame_cmmx, frame_cmmy; /* Hundredths of a mm, i.e. "centi-millimeters" */
int device_pxx, device_pxy; /* Pixels */
int mmx, mmy; /* Millimeters */
int micronx, microny; /* Micrometers */
const float dpmm = symbol->dpmm ? stripf(symbol->dpmm)
: ZBarcode_XdimDp_From_Scale(symbol->symbology, symbol->scale,
ZBarcode_Default_Xdim(symbol->symbology), "EMF");
const int sideways = rotate_angle == 90 || rotate_angle == 270;
int draw_background = 1;
int bold;
const int output_to_stdout = symbol->output_options & BARCODE_STDOUT;
struct zint_vector_rect *rect;
struct zint_vector_circle *circ;
struct zint_vector_hexagon *hex;
struct zint_vector_string *str;
2017-10-24 08:37:52 +13:00
/* Allow for up to 6 strings (current max 3 for UPC/EAN) */
unsigned char *this_string[6];
emr_exttextoutw_t text[6];
float text_fsizes[6];
int text_haligns[6];
emr_header_t emr_header;
emr_eof_t emr_eof;
emr_mapmode_t emr_mapmode;
emr_setworldtransform_t emr_setworldtransform;
emr_createbrushindirect_t emr_createbrushindirect_fg;
emr_createbrushindirect_t emr_createbrushindirect_bg;
emr_createbrushindirect_t emr_createbrushindirect_colour[9]; /* Used for colour symbols only */
emr_selectobject_t emr_selectobject_fgbrush;
emr_selectobject_t emr_selectobject_bgbrush;
emr_selectobject_t emr_selectobject_colour[9]; /* Used for colour symbols only */
emr_createpen_t emr_createpen;
emr_selectobject_t emr_selectobject_pen;
emr_rectangle_t background;
emr_settextcolor_t emr_settextcolor;
float fsize;
emr_extcreatefontindirectw_t emr_extcreatefontindirectw;
emr_selectobject_t emr_selectobject_font;
float fsize2;
emr_extcreatefontindirectw_t emr_extcreatefontindirectw2;
emr_selectobject_t emr_selectobject_font2;
int halign;
emr_settextalign_t emr_settextalign;
int halign1;
emr_settextalign_t emr_settextalign1;
int halign2;
emr_settextalign_t emr_settextalign2;
float current_fsize;
int current_halign;
2017-10-24 08:37:52 +13:00
2018-11-02 21:09:38 +13:00
emr_rectangle_t *rectangle;
emr_ellipse_t *circle;
emr_polygon_t *hexagon;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
const int ih_ultra_offset = symbol->symbology == BARCODE_ULTRA ? 8 : 0;
if (symbol->vector == NULL) {
strcpy(symbol->errtxt, "643: Vector header NULL");
return ZINT_ERROR_INVALID_DATA;
}
fgred = (16 * ctoi(symbol->fgcolour[0])) + ctoi(symbol->fgcolour[1]);
fggrn = (16 * ctoi(symbol->fgcolour[2])) + ctoi(symbol->fgcolour[3]);
fgblu = (16 * ctoi(symbol->fgcolour[4])) + ctoi(symbol->fgcolour[5]);
bgred = (16 * ctoi(symbol->bgcolour[0])) + ctoi(symbol->bgcolour[1]);
bggrn = (16 * ctoi(symbol->bgcolour[2])) + ctoi(symbol->bgcolour[3]);
bgblu = (16 * ctoi(symbol->bgcolour[4])) + ctoi(symbol->bgcolour[5]);
if (strlen(symbol->bgcolour) > 6) {
if ((ctoi(symbol->bgcolour[6]) == 0) && (ctoi(symbol->bgcolour[7]) == 0)) {
draw_background = 0;
}
}
2017-10-24 08:37:52 +13:00
rectangle_count = count_rectangles(symbol);
circle_count = count_circles(symbol);
hexagon_count = count_hexagons(symbol);
string_count = count_strings(symbol, &fsize, &fsize2, &halign, &halign1, &halign2);
/* Avoid sanitize runtime error by making always non-zero */
rectangle = (emr_rectangle_t *) z_alloca(sizeof(emr_rectangle_t) * (rectangle_count ? rectangle_count : 1));
circle = (emr_ellipse_t *) z_alloca(sizeof(emr_ellipse_t) * (circle_count ? circle_count : 1));
hexagon = (emr_polygon_t *) z_alloca(sizeof(emr_polygon_t) * (hexagon_count ? hexagon_count : 1));
2020-01-14 08:24:01 +13:00
/* Calculate how many coloured rectangles */
2020-01-14 08:24:01 +13:00
if (symbol->symbology == BARCODE_ULTRA) {
rect = symbol->vector->rectangles;
while (rect) {
if (rect->colour == -1) { /* Foreground colour */
if (rectangle_bycolour[0] == 0) {
colours_used++;
rectangle_bycolour[0] = 1;
}
} else {
if (rectangle_bycolour[rect->colour] == 0) {
colours_used++;
rectangle_bycolour[rect->colour] = 1;
}
2020-01-14 08:24:01 +13:00
}
rect = rect->next;
}
}
width = (int) ceilf(symbol->vector->width);
height = (int) ceilf(symbol->vector->height);
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
bounds_pxx = width - 1; /* Following Inkscape, bounds "inclusive-inclusive", so size 1 less */
bounds_pxy = height - 1;
device_pxx = width; /* device */
device_pxy = height;
if (dpmm) {
frame_cmmx = (int) roundf(stripf(width * 100.0f / dpmm)) - 1; /* frame also "inclusive-inclusive" */
frame_cmmy = (int) roundf(stripf(height * 100.0f / dpmm)) - 1;
mmx = (int) roundf(stripf(width / dpmm)); /* millimeters */
mmy = (int) roundf(stripf(height / dpmm));
micronx = (int) roundf(stripf(width * 1000.0f / dpmm)); /* micrometers */
microny = (int) roundf(stripf(height * 1000.0f / dpmm));
} else { /* Should only happen if `symbol->scale` zero. */
frame_cmmx = (int) roundf(stripf(width * 100.0f)) - 1;
frame_cmmy = (int) roundf(stripf(height * 100.0f)) - 1;
mmx = (int) roundf(stripf(width));
mmy = (int) roundf(stripf(height));
micronx = (int) roundf(stripf(width * 1000.0f));
microny = (int) roundf(stripf(height * 1000.0f));
}
/* Header */
emr_header.type = 0x00000001; /* EMR_HEADER */
emr_header.size = 108; /* Including extensions */
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_header.emf_header.bounds.left = emr_header.emf_header.bounds.top = 0;
emr_header.emf_header.bounds.right = sideways ? bounds_pxy : bounds_pxx;
emr_header.emf_header.bounds.bottom = sideways ? bounds_pxx : bounds_pxy;
emr_header.emf_header.frame.left = emr_header.emf_header.frame.top = 0;
emr_header.emf_header.frame.right = sideways ? frame_cmmy : frame_cmmx;
emr_header.emf_header.frame.bottom = sideways ? frame_cmmx : frame_cmmy;
emr_header.emf_header.record_signature = 0x464d4520; /* ENHMETA_SIGNATURE */
emr_header.emf_header.version = 0x00010000;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_header.emf_header.handles = (fsize2 != 0.0f ? 5 : 4) + ih_ultra_offset; /* Number of graphics objects */
emr_header.emf_header.reserved = 0x0000;
emr_header.emf_header.n_description = 0;
emr_header.emf_header.off_description = 0;
emr_header.emf_header.n_pal_entries = 0;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_header.emf_header.device.cx = sideways ? device_pxy : device_pxx;
emr_header.emf_header.device.cy = sideways ? device_pxx : device_pxy;
emr_header.emf_header.millimeters.cx = sideways ? mmy : mmx;
emr_header.emf_header.millimeters.cy = sideways ? mmx : mmy;
/* HeaderExtension1 */
emr_header.emf_header.cb_pixel_format = 0x0000; /* None set */
emr_header.emf_header.off_pixel_format = 0x0000; /* None set */
emr_header.emf_header.b_open_gl = 0x0000; /* OpenGL not present */
/* HeaderExtension2 */
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_header.emf_header.micrometers.cx = sideways ? microny : micronx;
emr_header.emf_header.micrometers.cy = sideways ? micronx : microny;
bytecount = 108;
recordcount = 1;
emr_mapmode.type = 0x00000011; /* EMR_SETMAPMODE */
emr_mapmode.size = 12;
emr_mapmode.mapmode = 0x01; /* MM_TEXT */
bytecount += 12;
recordcount++;
if (rotate_angle) {
emr_setworldtransform.type = 0x00000023; /* EMR_SETWORLDTRANSFORM */
emr_setworldtransform.size = 32;
emr_setworldtransform.m11 = rotate_angle == 90 ? 0.0f : rotate_angle == 180 ? -1.0f : 0.0f;
emr_setworldtransform.m12 = rotate_angle == 90 ? 1.0f : rotate_angle == 180 ? 0.0f : -1.0f;
emr_setworldtransform.m21 = rotate_angle == 90 ? -1.0f : rotate_angle == 180 ? 0.0f : 1.0f;
emr_setworldtransform.m22 = rotate_angle == 90 ? 0.0f : rotate_angle == 180 ? -1.0f : 0.0f;
emr_setworldtransform.dx = rotate_angle == 90 ? height : rotate_angle == 180 ? width : 0.0f;
emr_setworldtransform.dy = rotate_angle == 90 ? 0.0f : rotate_angle == 180 ? height : width;
bytecount += 32;
recordcount++;
}
/* Create Brushes */
emr_createbrushindirect_bg.type = 0x00000027; /* EMR_CREATEBRUSHINDIRECT */
emr_createbrushindirect_bg.size = 24;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_createbrushindirect_bg.ih_brush = 0;
emr_createbrushindirect_bg.log_brush.brush_style = 0x0000; /* BS_SOLID */
emr_createbrushindirect_bg.log_brush.color.red = bgred;
emr_createbrushindirect_bg.log_brush.color.green = bggrn;
emr_createbrushindirect_bg.log_brush.color.blue = bgblu;
emr_createbrushindirect_bg.log_brush.color.reserved = 0;
emr_createbrushindirect_bg.log_brush.brush_hatch = 0x0006; /* HS_SOLIDCLR */
bytecount += 24;
recordcount++;
2017-10-24 08:37:52 +13:00
2020-01-14 08:24:01 +13:00
if (symbol->symbology == BARCODE_ULTRA) {
for (i = 0; i < 9; i++) {
emr_createbrushindirect_colour[i].type = 0x00000027; /* EMR_CREATEBRUSHINDIRECT */
2020-01-14 08:24:01 +13:00
emr_createbrushindirect_colour[i].size = 24;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_createbrushindirect_colour[i].ih_brush = 1 + i;
emr_createbrushindirect_colour[i].log_brush.brush_style = 0x0000; /* BS_SOLID */
if (i == 0) {
emr_createbrushindirect_colour[i].log_brush.color.red = fgred;
emr_createbrushindirect_colour[i].log_brush.color.green = fggrn;
emr_createbrushindirect_colour[i].log_brush.color.blue = fgblu;
} else {
emr_createbrushindirect_colour[i].log_brush.color.red = colour_to_red(i);
emr_createbrushindirect_colour[i].log_brush.color.green = colour_to_green(i);
emr_createbrushindirect_colour[i].log_brush.color.blue = colour_to_blue(i);
}
2020-01-14 08:24:01 +13:00
emr_createbrushindirect_colour[i].log_brush.color.reserved = 0;
emr_createbrushindirect_colour[i].log_brush.brush_hatch = 0x0006; /* HS_SOLIDCLR */
2020-01-14 08:24:01 +13:00
}
bytecount += colours_used * 24;
recordcount += colours_used;
} else {
emr_createbrushindirect_fg.type = 0x00000027; /* EMR_CREATEBRUSHINDIRECT */
2020-01-14 08:24:01 +13:00
emr_createbrushindirect_fg.size = 24;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_createbrushindirect_fg.ih_brush = 1;
emr_createbrushindirect_fg.log_brush.brush_style = 0x0000; /* BS_SOLID */
2020-01-14 08:24:01 +13:00
emr_createbrushindirect_fg.log_brush.color.red = fgred;
emr_createbrushindirect_fg.log_brush.color.green = fggrn;
emr_createbrushindirect_fg.log_brush.color.blue = fgblu;
emr_createbrushindirect_fg.log_brush.color.reserved = 0;
emr_createbrushindirect_fg.log_brush.brush_hatch = 0x0006; /* HS_SOLIDCLR */
2020-01-14 08:24:01 +13:00
bytecount += 24;
recordcount++;
}
2017-10-24 08:37:52 +13:00
emr_selectobject_bgbrush.type = 0x00000025; /* EMR_SELECTOBJECT */
emr_selectobject_bgbrush.size = 12;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_selectobject_bgbrush.ih_object = emr_createbrushindirect_bg.ih_brush;
bytecount += 12;
recordcount++;
2020-01-14 08:24:01 +13:00
if (symbol->symbology == BARCODE_ULTRA) {
for (i = 0; i < 9; i++) {
emr_selectobject_colour[i].type = 0x00000025; /* EMR_SELECTOBJECT */
2020-01-14 08:24:01 +13:00
emr_selectobject_colour[i].size = 12;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_selectobject_colour[i].ih_object = emr_createbrushindirect_colour[i].ih_brush;
2020-01-14 08:24:01 +13:00
}
bytecount += colours_used * 12;
recordcount += colours_used;
} else {
emr_selectobject_fgbrush.type = 0x00000025; /* EMR_SELECTOBJECT */
2020-01-14 08:24:01 +13:00
emr_selectobject_fgbrush.size = 12;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_selectobject_fgbrush.ih_object = emr_createbrushindirect_fg.ih_brush;
2020-01-14 08:24:01 +13:00
bytecount += 12;
recordcount++;
}
/* Create Pens */
emr_createpen.type = 0x00000026; /* EMR_CREATEPEN */
emr_createpen.size = 28;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_createpen.ih_pen = 2 + ih_ultra_offset;
emr_createpen.log_pen.pen_style = 0x00000005; /* PS_NULL */
emr_createpen.log_pen.width.x = 1;
emr_createpen.log_pen.width.y = 0; /* ignored */
emr_createpen.log_pen.color_ref.red = 0;
emr_createpen.log_pen.color_ref.green = 0;
emr_createpen.log_pen.color_ref.blue = 0;
emr_createpen.log_pen.color_ref.reserved = 0;
bytecount += 28;
recordcount++;
2017-10-24 08:37:52 +13:00
emr_selectobject_pen.type = 0x00000025; /* EMR_SELECTOBJECT */
emr_selectobject_pen.size = 12;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_selectobject_pen.ih_object = emr_createpen.ih_pen;
bytecount += 12;
recordcount++;
2017-10-24 08:37:52 +13:00
if (draw_background) {
/* Make background from a rectangle */
background.type = 0x0000002b; /* EMR_RECTANGLE */
background.size = 24;
background.box.top = 0;
background.box.left = 0;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
background.box.right = width;
background.box.bottom = height;
bytecount += 24;
recordcount++;
}
/* Rectangles */
rect = symbol->vector->rectangles;
this_rectangle = 0;
while (rect) {
rectangle[this_rectangle].type = 0x0000002b; /* EMR_RECTANGLE */
rectangle[this_rectangle].size = 24;
rectangle[this_rectangle].box.top = (int32_t) rect->y;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
rectangle[this_rectangle].box.bottom = (int32_t) stripf(rect->y + rect->height);
rectangle[this_rectangle].box.left = (int32_t) rect->x;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
rectangle[this_rectangle].box.right = (int32_t) stripf(rect->x + rect->width);
this_rectangle++;
bytecount += 24;
recordcount++;
rect = rect->next;
}
/* Circles */
previous_diameter = radius = 0.0f;
circ = symbol->vector->circles;
this_circle = 0;
while (circ) {
/* Note using circle width the proper way, with a non-null pen of specified width and a null brush for fill,
causes various different rendering issues for LibreOffice Draw and Inkscape, so using following hack */
if (previous_diameter != circ->diameter + circ->width) { /* Drawing MaxiCode bullseye using overlayed discs */
previous_diameter = circ->diameter + circ->width;
radius = mul3dpf(0.5, previous_diameter);
}
circle[this_circle].type = 0x0000002a; /* EMR_ELLIPSE */
circle[this_circle].size = 24;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
circle[this_circle].box.top = (int32_t) stripf(circ->y - radius);
circle[this_circle].box.bottom = (int32_t) stripf(circ->y + radius);
circle[this_circle].box.left = (int32_t) stripf(circ->x - radius);
circle[this_circle].box.right = (int32_t) stripf(circ->x + radius);
this_circle++;
bytecount += 24;
recordcount++;
if (symbol->symbology == BARCODE_MAXICODE) { /* Drawing MaxiCode bullseye using overlayed discs */
float inner_radius = radius - circ->width;
circle[this_circle].type = 0x0000002a; /* EMR_ELLIPSE */
circle[this_circle].size = 24;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
circle[this_circle].box.top = (int32_t) stripf(circ->y - inner_radius);
circle[this_circle].box.bottom = (int32_t) stripf(circ->y + inner_radius);
circle[this_circle].box.left = (int32_t) stripf(circ->x - inner_radius);
circle[this_circle].box.right = (int32_t) stripf(circ->x + inner_radius);
this_circle++;
bytecount += 24;
recordcount++;
}
circ = circ->next;
}
/* Hexagons */
previous_diameter = radius = half_radius = half_sqrt3_radius = 0.0f;
hex = symbol->vector->hexagons;
this_hexagon = 0;
while (hex) {
hexagon[this_hexagon].type = 0x00000003; /* EMR_POLYGON */
hexagon[this_hexagon].size = 76;
hexagon[this_hexagon].count = 6;
if (previous_diameter != hex->diameter) {
previous_diameter = hex->diameter;
radius = mul3dpf(0.5, previous_diameter);
half_radius = mul3dpf(0.25, previous_diameter);
half_sqrt3_radius = mul3dpf(0.43301270189221932338, previous_diameter);
}
/* Note rotation done via world transform */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-21 11:05:30 +13:00
hexagon[this_hexagon].a_points_a.x = (int32_t) hex->x;
hexagon[this_hexagon].a_points_a.y = (int32_t) stripf(hex->y + radius);
hexagon[this_hexagon].a_points_b.x = (int32_t) stripf(hex->x + half_sqrt3_radius);
hexagon[this_hexagon].a_points_b.y = (int32_t) stripf(hex->y + half_radius);
hexagon[this_hexagon].a_points_c.x = (int32_t) stripf(hex->x + half_sqrt3_radius);
hexagon[this_hexagon].a_points_c.y = (int32_t) stripf(hex->y - half_radius);
hexagon[this_hexagon].a_points_d.x = (int32_t) hex->x;
hexagon[this_hexagon].a_points_d.y = (int32_t) stripf(hex->y - radius);
hexagon[this_hexagon].a_points_e.x = (int32_t) stripf(hex->x - half_sqrt3_radius);
hexagon[this_hexagon].a_points_e.y = (int32_t) stripf(hex->y - half_radius);
hexagon[this_hexagon].a_points_f.x = (int32_t) stripf(hex->x - half_sqrt3_radius);
hexagon[this_hexagon].a_points_f.y = (int32_t) stripf(hex->y + half_radius);
hexagon[this_hexagon].bounds.top = hexagon[this_hexagon].a_points_d.y;
hexagon[this_hexagon].bounds.bottom = hexagon[this_hexagon].a_points_a.y;
hexagon[this_hexagon].bounds.left = hexagon[this_hexagon].a_points_e.x;
hexagon[this_hexagon].bounds.right = hexagon[this_hexagon].a_points_c.x;
this_hexagon++;
bytecount += 76;
recordcount++;
hex = hex->next;
}
/* Create font records, alignment records and text color */
if (symbol->vector->strings) {
bold = (symbol->output_options & BOLD_TEXT) &&
(!is_extendable(symbol->symbology) || (symbol->output_options & SMALL_TEXT));
memset(&emr_extcreatefontindirectw, 0, sizeof(emr_extcreatefontindirectw));
emr_extcreatefontindirectw.type = 0x00000052; /* EMR_EXTCREATEFONTINDIRECTW */
emr_extcreatefontindirectw.size = 104;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_extcreatefontindirectw.ih_fonts = 3 + ih_ultra_offset;
emr_extcreatefontindirectw.elw.height = (int32_t) fsize;
emr_extcreatefontindirectw.elw.width = 0; /* automatic */
emr_extcreatefontindirectw.elw.weight = bold ? 700 : 400;
emr_extcreatefontindirectw.elw.char_set = 0x00; /* ANSI_CHARSET */
emr_extcreatefontindirectw.elw.out_precision = 0x00; /* OUT_DEFAULT_PRECIS */
emr_extcreatefontindirectw.elw.clip_precision = 0x00; /* CLIP_DEFAULT_PRECIS */
emr_extcreatefontindirectw.elw.pitch_and_family = 0x02 | (0x02 << 6); /* FF_SWISS | VARIABLE_PITCH */
utfle_copy(emr_extcreatefontindirectw.elw.facename, (unsigned char *) "sans-serif", 10);
bytecount += 104;
recordcount++;
emr_selectobject_font.type = 0x00000025; /* EMR_SELECTOBJECT */
emr_selectobject_font.size = 12;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_selectobject_font.ih_object = emr_extcreatefontindirectw.ih_fonts;
bytecount += 12;
recordcount++;
if (fsize2) {
memcpy(&emr_extcreatefontindirectw2, &emr_extcreatefontindirectw, sizeof(emr_extcreatefontindirectw));
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_extcreatefontindirectw2.ih_fonts = 4 + ih_ultra_offset;
emr_extcreatefontindirectw2.elw.height = (int32_t) fsize2;
bytecount += 104;
recordcount++;
emr_selectobject_font2.type = 0x00000025; /* EMR_SELECTOBJECT */
emr_selectobject_font2.size = 12;
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
emr_selectobject_font2.ih_object = emr_extcreatefontindirectw2.ih_fonts;
bytecount += 12;
recordcount++;
}
/* Note select aligns counted below in strings loop */
emr_settextalign.type = 0x00000016; /* EMR_SETTEXTALIGN */
emr_settextalign.size = 12;
emr_settextalign.text_alignment_mode = 0x0006 | 0x0018; /* TA_CENTER | TA_BASELINE */
if (halign1) {
emr_settextalign1.type = 0x00000016; /* EMR_SETTEXTALIGN */
emr_settextalign1.size = 12;
emr_settextalign1.text_alignment_mode = 0x0000 | 0x0018; /* TA_LEFT | TA_BASELINE */
}
if (halign2) {
emr_settextalign2.type = 0x00000016; /* EMR_SETTEXTALIGN */
emr_settextalign2.size = 12;
emr_settextalign2.text_alignment_mode = 0x0002 | 0x0018; /* TA_RIGHT | TA_BASELINE */
}
emr_settextcolor.type = 0x0000018; /* EMR_SETTEXTCOLOR */
emr_settextcolor.size = 12;
emr_settextcolor.color.red = fgred;
emr_settextcolor.color.green = fggrn;
emr_settextcolor.color.blue = fgblu;
emr_settextcolor.color.reserved = 0;
bytecount += 12;
recordcount++;
}
/* Text */
this_text = 0;
/* Loop over font sizes so that they're grouped together, so only have to select font twice at most */
for (i = 0, current_fsize = fsize; i < 2 && current_fsize; i++, current_fsize = fsize2) {
str = symbol->vector->strings;
current_halign = -1;
while (str) {
int utfle_len;
int bumped_len;
if (str->fsize != current_fsize) {
str = str->next;
continue;
}
text_fsizes[this_text] = str->fsize;
text_haligns[this_text] = str->halign;
if (text_haligns[this_text] != current_halign) {
current_halign = text_haligns[this_text];
bytecount += 12;
recordcount++;
}
assert(str->length > 0);
utfle_len = utfle_length(str->text, str->length);
bumped_len = bump_up(utfle_len) * 2;
if (!(this_string[this_text] = (unsigned char *) malloc(bumped_len))) {
for (i = 0; i < this_text; i++) {
free(this_string[i]);
}
strcpy(symbol->errtxt, "641: Insufficient memory for EMF string buffer");
return ZINT_ERROR_MEMORY;
}
memset(this_string[this_text], 0, bumped_len);
text[this_text].type = 0x00000054; /* EMR_EXTTEXTOUTW */
text[this_text].size = 76 + bumped_len;
text[this_text].bounds.top = 0; /* ignored */
text[this_text].bounds.left = 0; /* ignored */
text[this_text].bounds.right = 0xffffffff; /* ignored */
text[this_text].bounds.bottom = 0xffffffff; /* ignored */
text[this_text].i_graphics_mode = 0x00000002; /* GM_ADVANCED */
text[this_text].ex_scale = 1.0f;
text[this_text].ey_scale = 1.0f;
text[this_text].w_emr_text.reference.x = (int32_t) str->x;
text[this_text].w_emr_text.reference.y = (int32_t) str->y;
text[this_text].w_emr_text.chars = utfle_len;
text[this_text].w_emr_text.off_string = 76;
text[this_text].w_emr_text.options = 0;
text[this_text].w_emr_text.rectangle.top = 0;
text[this_text].w_emr_text.rectangle.left = 0;
text[this_text].w_emr_text.rectangle.right = 0xffffffff;
text[this_text].w_emr_text.rectangle.bottom = 0xffffffff;
text[this_text].w_emr_text.off_dx = 0;
utfle_copy(this_string[this_text], str->text, str->length);
bytecount += 76 + bumped_len;
recordcount++;
this_text++;
str = str->next;
}
}
2021-07-27 02:55:34 +12:00
/* Suppress clang-tidy clang-analyzer-core.UndefinedBinaryOperatorResult warning */
assert(this_text == string_count);
/* Create EOF record */
emr_eof.type = 0x0000000e; /* EMR_EOF */
emr_eof.size = 20; /* Assuming no palette entries */
emr_eof.n_pal_entries = 0;
emr_eof.off_pal_entries = 0;
emr_eof.size_last = emr_eof.size;
bytecount += 20;
recordcount++;
2017-10-24 08:37:52 +13:00
if (symbol->symbology == BARCODE_MAXICODE) {
bytecount += 5 * sizeof(emr_selectobject_t);
recordcount += 5;
}
/* Put final counts in header */
emr_header.emf_header.bytes = bytecount;
emr_header.emf_header.records = recordcount;
2017-10-24 08:37:52 +13:00
/* Send EMF data to file */
if (output_to_stdout) {
#ifdef _MSC_VER
if (-1 == _setmode(_fileno(stdout), _O_BINARY)) {
sprintf(symbol->errtxt, "642: Could not set stdout to binary (%d: %.30s)", errno, strerror(errno));
return ZINT_ERROR_FILE_ACCESS;
}
#endif
emf_file = stdout;
} else {
- API: add new zint_symbol `dpmm` field for output resolution (BMP/ EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG) - Add support for specifying scale by X-dimension and resolution with new option `--scalexdimdp` for CLI/Tcl & new API function `ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()` & `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document - BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF following Inkscape) - backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`, `noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff incl. new `QZintXdimDp` struct for passing around scale vars & use in `getAsCLI()`; add comments - Raise `scale` limit to 200 (from 100) to allow for large dpmm - output: create directories & subdirectories as necessary for output path using new function `out_fopen()` and use in BMP/EMF/ EPS/GIF/PCX/PNG/SVG/TIF - DPLEIT/DPIDENT: format HRT according to (incomplete) documentation, and set default height to 72X (from 50X) - CODE128B renamed to CODE128AB as can use subsets A and/or B - CODABAR: fix minimum height calc - EMF: fix indexing of handles (zero-based not 1-based) - GUI: fix symbology zap (previous technique of clearing and re-loading settings without doing a sync no longer works); fix UPCEAN guard descent enable - MAILMARK: better error message if input < 14 characters - GUI: add "Default" button for DAFT tracker ratio & enable/disable various default buttons; use new `takesGS1AIData()` to enable/disable GS1-specific checkboxes - CLI: use new `validate_float()` to parse float options (7 significant digits allowed only, no scientific notation) - DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp ID parse - library/CLI: fiddle with static asserts (make CHAR_BIT sensitive, supposedly) - win32/README: update building libpng (assembly removed) - README.linux: document incompatibility of Qt6 >= 6.3 - manual: expand Barcode Studio waffle - test suite: change range separator to hyphen and allow multiple excludes
2022-12-03 10:39:01 +13:00
if (!(emf_file = out_fopen(symbol->outfile, "wb"))) {
sprintf(symbol->errtxt, "640: Could not open output file (%d: %.30s)", errno, strerror(errno));
return ZINT_ERROR_FILE_ACCESS;
}
}
2017-10-24 08:37:52 +13:00
fwrite(&emr_header, sizeof(emr_header_t), 1, emf_file);
2017-10-24 08:37:52 +13:00
fwrite(&emr_mapmode, sizeof(emr_mapmode_t), 1, emf_file);
if (rotate_angle) {
fwrite(&emr_setworldtransform, sizeof(emr_setworldtransform_t), 1, emf_file);
}
fwrite(&emr_createbrushindirect_bg, sizeof(emr_createbrushindirect_t), 1, emf_file);
2020-01-14 08:24:01 +13:00
if (symbol->symbology == BARCODE_ULTRA) {
for (i = 0; i < 9; i++) {
if (rectangle_bycolour[i]) {
fwrite(&emr_createbrushindirect_colour[i], sizeof(emr_createbrushindirect_t), 1, emf_file);
2020-01-14 08:24:01 +13:00
}
}
} else {
fwrite(&emr_createbrushindirect_fg, sizeof(emr_createbrushindirect_t), 1, emf_file);
2020-01-14 08:24:01 +13:00
}
fwrite(&emr_createpen, sizeof(emr_createpen_t), 1, emf_file);
2017-10-24 08:37:52 +13:00
if (symbol->vector->strings) {
fwrite(&emr_extcreatefontindirectw, sizeof(emr_extcreatefontindirectw_t), 1, emf_file);
if (fsize2) {
fwrite(&emr_extcreatefontindirectw2, sizeof(emr_extcreatefontindirectw_t), 1, emf_file);
}
}
2017-10-24 08:37:52 +13:00
fwrite(&emr_selectobject_bgbrush, sizeof(emr_selectobject_t), 1, emf_file);
fwrite(&emr_selectobject_pen, sizeof(emr_selectobject_t), 1, emf_file);
if (draw_background) {
fwrite(&background, sizeof(emr_rectangle_t), 1, emf_file);
}
2017-10-24 08:37:52 +13:00
2020-01-14 08:24:01 +13:00
if (symbol->symbology == BARCODE_ULTRA) {
for (i = 0; i < 9; i++) {
if (rectangle_bycolour[i]) {
fwrite(&emr_selectobject_colour[i], sizeof(emr_selectobject_t), 1, emf_file);
2020-01-14 08:24:01 +13:00
rect = symbol->vector->rectangles;
this_rectangle = 0;
while (rect) {
if ((i == 0 && rect->colour == -1) || rect->colour == i) {
fwrite(&rectangle[this_rectangle], sizeof(emr_rectangle_t), 1, emf_file);
2020-01-14 08:24:01 +13:00
}
this_rectangle++;
rect = rect->next;
}
}
}
} else {
fwrite(&emr_selectobject_fgbrush, sizeof(emr_selectobject_t), 1, emf_file);
/* Rectangles */
2020-01-14 08:24:01 +13:00
for (i = 0; i < rectangle_count; i++) {
fwrite(&rectangle[i], sizeof(emr_rectangle_t), 1, emf_file);
2020-01-14 08:24:01 +13:00
}
}
2017-10-24 08:37:52 +13:00
/* Hexagons */
for (i = 0; i < hexagon_count; i++) {
fwrite(&hexagon[i], sizeof(emr_polygon_t), 1, emf_file);
}
2017-10-24 08:37:52 +13:00
/* Circles */
if (symbol->symbology == BARCODE_MAXICODE) {
/* Bullseye needed */
for (i = 0; i < circle_count; i++) {
fwrite(&circle[i], sizeof(emr_ellipse_t), 1, emf_file);
if (i < circle_count - 1) {
if (i % 2) {
fwrite(&emr_selectobject_fgbrush, sizeof(emr_selectobject_t), 1, emf_file);
} else {
fwrite(&emr_selectobject_bgbrush, sizeof(emr_selectobject_t), 1, emf_file);
}
}
}
} else {
for (i = 0; i < circle_count; i++) {
fwrite(&circle[i], sizeof(emr_ellipse_t), 1, emf_file);
}
}
/* Text */
if (string_count > 0) {
fwrite(&emr_selectobject_font, sizeof(emr_selectobject_t), 1, emf_file);
fwrite(&emr_settextcolor, sizeof(emr_settextcolor_t), 1, emf_file);
}
current_fsize = fsize;
current_halign = -1;
for (i = 0; i < string_count; i++) {
if (text_fsizes[i] != current_fsize) {
current_fsize = text_fsizes[i];
fwrite(&emr_selectobject_font2, sizeof(emr_selectobject_t), 1, emf_file);
}
if (text_haligns[i] != current_halign) {
current_halign = text_haligns[i];
if (current_halign == 0) {
fwrite(&emr_settextalign, sizeof(emr_settextalign_t), 1, emf_file);
} else if (current_halign == 1) {
fwrite(&emr_settextalign1, sizeof(emr_settextalign_t), 1, emf_file);
} else {
fwrite(&emr_settextalign2, sizeof(emr_settextalign_t), 1, emf_file);
}
}
fwrite(&text[i], sizeof(emr_exttextoutw_t), 1, emf_file);
fwrite(this_string[i], bump_up(text[i].w_emr_text.chars) * 2, 1, emf_file);
free(this_string[i]);
}
2017-10-24 08:37:52 +13:00
fwrite(&emr_eof, sizeof(emr_eof_t), 1, emf_file);
2017-10-24 08:37:52 +13:00
if (ferror(emf_file)) {
sprintf(symbol->errtxt, "644: Incomplete write to output (%d: %.30s)", errno, strerror(errno));
if (!output_to_stdout) {
(void) fclose(emf_file);
}
return ZINT_ERROR_FILE_WRITE;
}
if (output_to_stdout) {
if (fflush(emf_file) != 0) {
sprintf(symbol->errtxt, "940: Incomplete flush to output (%d: %.30s)", errno, strerror(errno));
return ZINT_ERROR_FILE_WRITE;
}
} else {
if (fclose(emf_file) != 0) {
sprintf(symbol->errtxt, "941: Failure on closing output file (%d: %.30s)", errno, strerror(errno));
return ZINT_ERROR_FILE_WRITE;
}
}
return error_number;
}
/* vim: set ts=4 sw=4 et : */