2019-10-17 22:06:21 +13:00
/*
libzint - the open source barcode library
2020-05-06 09:28:25 +12:00
Copyright ( C ) 2019 - 2020 Robin Stuart < rstuart114 @ gmail . com >
2019-10-17 22:06:21 +13:00
Redistribution and use in source and binary forms , with or without
modification , are permitted provided that the following conditions
are met :
1. Redistributions of source code must retain the above copyright
notice , this list of conditions and the following disclaimer .
2. Redistributions in binary form must reproduce the above copyright
notice , this list of conditions and the following disclaimer in the
documentation and / or other materials provided with the distribution .
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission .
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS " AS IS " AND
ANY EXPRESS OR IMPLIED WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED . IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT , INDIRECT , INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL
DAMAGES ( INCLUDING , BUT NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES ; LOSS OF USE , DATA , OR PROFITS ; OR BUSINESS INTERRUPTION )
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT
LIABILITY , OR TORT ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE .
*/
/* vim: set ts=4 sw=4 et : */
# include "testcommon.h"
2020-03-27 11:17:37 +13:00
# include <fcntl.h>
# include <sys/stat.h>
# include <unistd.h>
2019-10-17 22:06:21 +13:00
2020-05-06 09:28:25 +12:00
static void test_checks ( int index , int debug ) {
2019-10-17 22:06:21 +13:00
testStart ( " " ) ;
int ret ;
struct item {
int symbology ;
2020-10-04 10:51:08 +13:00
char * data ;
2019-10-17 22:06:21 +13:00
int length ;
int input_mode ;
int eci ;
float dot_size ;
2020-11-02 07:32:55 +13:00
int warn_level ;
2019-10-17 22:06:21 +13:00
int ret ;
2020-05-06 09:28:25 +12:00
char * expected ;
2019-10-17 22:06:21 +13:00
} ;
2020-11-02 07:32:55 +13:00
// s/\/\*[ 0-9]*\*\//\=printf("\/*%3d*\/", line(".") - line("'<"))
2019-10-17 22:06:21 +13:00
struct item data [ ] = {
2020-11-02 07:32:55 +13:00
/* 0*/ { BARCODE_CODE128 , " 1234 " , - 1 , - 1 , 3 , - 1 , - 1 , ZINT_ERROR_INVALID_OPTION , " Error 217: Symbology does not support ECI switching " } ,
/* 1*/ { BARCODE_CODE128 , " 1234 " , - 1 , - 1 , 0 , - 1 , - 1 , 0 , " " } ,
/* 2*/ { BARCODE_QRCODE , " 1234 " , - 1 , - 1 , 3 , - 1 , - 1 , 0 , " " } ,
/* 3*/ { BARCODE_QRCODE , " 1234 " , - 1 , - 1 , 999999 + 1 , - 1 , - 1 , ZINT_ERROR_INVALID_OPTION , " Error 218: Invalid ECI mode " } ,
/* 4*/ { BARCODE_CODE128 , " 1234 " , - 1 , - 1 , - 1 , 20.1 , - 1 , ZINT_ERROR_INVALID_OPTION , " Error 221: Invalid dot size " } ,
/* 5*/ { BARCODE_CODE128 , " 1234 " , - 1 , GS1_MODE , - 1 , - 1 , - 1 , ZINT_ERROR_INVALID_OPTION , " Error 220: Selected symbology does not support GS1 mode " } ,
/* 6*/ { BARCODE_GS1_128 , " [21]12 \000 4 " , 8 , GS1_MODE , - 1 , - 1 , - 1 , ZINT_ERROR_INVALID_DATA , " Error 262: NUL characters not permitted in GS1 mode " } ,
/* 7*/ { BARCODE_GS1_128 , " [21]12é4 " , - 1 , GS1_MODE , - 1 , - 1 , - 1 , ZINT_ERROR_INVALID_DATA , " Error 250: Extended ASCII characters are not supported by GS1 " } ,
/* 8*/ { BARCODE_GS1_128 , " [21]12 \007 4 " , - 1 , GS1_MODE , - 1 , - 1 , - 1 , ZINT_ERROR_INVALID_DATA , " Error 251: Control characters are not supported by GS1 " } ,
/* 9*/ { BARCODE_GS1_128 , " [21]1234 " , - 1 , GS1_MODE , - 1 , - 1 , - 1 , 0 , " " } ,
/* 10*/ { 0 , " 1 " , - 1 , - 1 , - 1 , - 1 , - 1 , ZINT_WARN_INVALID_OPTION , " Warning 206: Symbology out of range " } ,
/* 11*/ { 0 , " 1 " , - 1 , - 1 , - 1 , - 1 , WARN_FAIL_ALL , ZINT_ERROR_INVALID_OPTION , " Error 206: Symbology out of range " } ,
/* 12*/ { 0 , " 1 " , - 1 , - 1 , 1 , - 1 , - 1 , ZINT_ERROR_INVALID_OPTION , " Error 217: Symbology does not support ECI switching " } , // Not supporting beats invalid ECI
/* 13*/ { 0 , " 1 " , - 1 , - 1 , 1 , - 1 , WARN_FAIL_ALL , ZINT_ERROR_INVALID_OPTION , " Error 206: Symbology out of range " } ,
/* 14*/ { 0 , " 1 " , - 1 , - 1 , - 1 , 0.009 , - 1 , ZINT_ERROR_INVALID_OPTION , " Error 221: Invalid dot size " } ,
/* 15*/ { 0 , " 1 " , - 1 , - 1 , - 1 , 0.009 , WARN_FAIL_ALL , ZINT_ERROR_INVALID_OPTION , " Error 206: Symbology out of range " } ,
/* 16*/ { 0 , " 1 " , - 1 , - 1 , 1 , 0.009 , - 1 , ZINT_ERROR_INVALID_OPTION , " Error 221: Invalid dot size " } , // Invalid dot size beats invalid ECI
2019-10-17 22:06:21 +13:00
} ;
int data_size = sizeof ( data ) / sizeof ( struct item ) ;
for ( int i = 0 ; i < data_size ; i + + ) {
2020-05-06 09:28:25 +12:00
if ( index ! = - 1 & & i ! = index ) continue ;
struct zint_symbol * symbol = ZBarcode_Create ( ) ;
2019-10-17 22:06:21 +13:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
symbol - > symbology = data [ i ] . symbology ;
if ( data [ i ] . input_mode ! = - 1 ) {
symbol - > input_mode = data [ i ] . input_mode ;
}
if ( data [ i ] . eci ! = - 1 ) {
symbol - > eci = data [ i ] . eci ;
}
if ( data [ i ] . dot_size ! = - 1 ) {
symbol - > dot_size = data [ i ] . dot_size ;
}
2020-11-02 07:32:55 +13:00
if ( data [ i ] . warn_level ! = - 1 ) {
symbol - > warn_level = data [ i ] . warn_level ;
}
2020-05-06 09:28:25 +12:00
symbol - > debug | = debug ;
2020-04-05 03:53:29 +12:00
int length = data [ i ] . length = = - 1 ? ( int ) strlen ( data [ i ] . data ) : data [ i ] . length ;
2019-10-17 22:06:21 +13:00
2020-10-04 10:51:08 +13:00
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
2019-10-17 22:06:21 +13:00
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode(%d) ret %d != %d (%s) \n " , i , data [ i ] . symbology , ret , data [ i ] . ret , symbol - > errtxt ) ;
ret = strcmp ( symbol - > errtxt , data [ i ] . expected ) ;
assert_zero ( ret , " i:%d (%d) strcmp(%s, %s) %d != 0 \n " , i , data [ i ] . symbology , symbol - > errtxt , data [ i ] . expected , ret ) ;
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2020-05-06 09:28:25 +12:00
static void test_input_mode ( int index , int debug ) {
2019-11-28 05:16:14 +13:00
testStart ( " " ) ;
int ret ;
struct item {
2020-10-04 10:51:08 +13:00
char * data ;
2019-11-28 05:16:14 +13:00
int input_mode ;
int ret ;
int expected_input_mode ;
} ;
// s/\/\*[ 0-9]*\*\//\=printf("\/*%3d*\/", line(".") - line("'<"))
struct item data [ ] = {
/* 0*/ { " 1234 " , DATA_MODE , 0 , DATA_MODE } ,
/* 1*/ { " 1234 " , DATA_MODE | ESCAPE_MODE , 0 , DATA_MODE | ESCAPE_MODE } ,
/* 2*/ { " 1234 " , UNICODE_MODE , 0 , UNICODE_MODE } ,
/* 3*/ { " 1234 " , UNICODE_MODE | ESCAPE_MODE , 0 , UNICODE_MODE | ESCAPE_MODE } ,
/* 4*/ { " [01]12345678901234 " , GS1_MODE , 0 , GS1_MODE } ,
/* 5*/ { " [01]12345678901234 " , GS1_MODE | ESCAPE_MODE , 0 , GS1_MODE | ESCAPE_MODE } ,
/* 6*/ { " 1234 " , 4 | ESCAPE_MODE , 0 , DATA_MODE } , // Unknown mode reset to bare DATA_MODE
/* 7*/ { " 1234 " , - 1 , 0 , DATA_MODE } ,
/* 8*/ { " 1234 " , DATA_MODE | 0x10 , 0 , DATA_MODE | 0x10 } , // Unknown flags kept (but ignored)
/* 9*/ { " 1234 " , UNICODE_MODE | 0x10 , 0 , U NICODE_MODE | 0x10 } ,
/* 10*/ { " [01]12345678901234 " , GS1_MODE | 0x20 , 0 , GS1_MODE | 0x20 } ,
} ;
int data_size = sizeof ( data ) / sizeof ( struct item ) ;
for ( int i = 0 ; i < data_size ; i + + ) {
2020-05-06 09:28:25 +12:00
if ( index ! = - 1 & & i ! = index ) continue ;
struct zint_symbol * symbol = ZBarcode_Create ( ) ;
2019-11-28 05:16:14 +13:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
symbol - > symbology = BARCODE_CODE49 ; // Supports GS1
symbol - > input_mode = data [ i ] . input_mode ;
2020-05-06 09:28:25 +12:00
symbol - > debug | = debug ;
2019-11-28 05:16:14 +13:00
int length = strlen ( data [ i ] . data ) ;
2020-10-04 10:51:08 +13:00
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
2019-11-28 05:16:14 +13:00
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
assert_equal ( symbol - > input_mode , data [ i ] . expected_input_mode , " i:%d symbol->input_mode %d != %d \n " , i , symbol - > input_mode , data [ i ] . expected_input_mode ) ;
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2020-05-16 21:22:33 +12:00
static void test_escape_char_process ( int index , int generate , int debug ) {
testStart ( " " ) ;
int ret ;
struct item {
2020-05-22 05:22:28 +12:00
int input_mode ;
2020-10-04 10:51:08 +13:00
char * data ;
2020-05-16 21:22:33 +12:00
int ret ;
int expected_width ;
char * expected ;
char * comment ;
} ;
struct item data [ ] = {
2020-05-22 05:22:28 +12:00
/* 0*/ { DATA_MODE , " \\ 0 \\ E \\ a \\ b \\ t \\ n \\ v \\ f \\ r \\ e \\ G \\ R \\ x81 \\ \\ " , 0 , 200 , " (18) 103 64 68 71 72 73 74 75 76 77 91 93 94 101 65 60 44 106 " , " " } ,
/* 1*/ { DATA_MODE , " \\ c " , ZINT_ERROR_INVALID_DATA , 0 , " Error 234: Unrecognised escape character in input data " , " " } ,
/* 2*/ { DATA_MODE , " \\ " , ZINT_ERROR_INVALID_DATA , 0 , " Error 236: Incomplete escape character in input data " , " " } ,
/* 3*/ { DATA_MODE , " \\ x " , ZINT_ERROR_INVALID_DATA , 0 , " Error 232: Incomplete escape character in input data " , " " } ,
/* 4*/ { DATA_MODE , " \\ x1 " , ZINT_ERROR_INVALID_DATA , 0 , " Error 232: Incomplete escape character in input data " , " " } ,
/* 5*/ { DATA_MODE , " \\ x1g " , ZINT_ERROR_INVALID_DATA , 0 , " Error 233: Corrupt escape character in input data " , " " } ,
/* 6*/ { UNICODE_MODE , " \\ xA01 \\ xFF " , 0 , 90 , " (8) 104 100 0 17 100 95 100 106 " , " " } ,
2020-10-01 00:19:12 +13:00
/* 7*/ { UNICODE_MODE , " \\ u00A01 \\ u00FF " , 0 , 90 , " (8) 104 100 0 17 100 95 100 106 " , " " } ,
/* 8*/ { DATA_MODE , " \\ xc3 \\ xbF " , 0 , 79 , " (7) 104 100 35 100 31 80 106 " , " " } ,
/* 9*/ { DATA_MODE , " \\ u00fF " , 0 , 79 , " (7) 104 100 35 100 31 80 106 " , " " } ,
/* 10*/ { DATA_MODE , " \\ u " , ZINT_ERROR_INVALID_DATA , 0 , " Error 235: Incomplete unicode escape character in input data " , " " } ,
/* 11*/ { DATA_MODE , " \\ uF " , ZINT_ERROR_INVALID_DATA , 0 , " Error 235: Incomplete unicode escape character in input data " , " " } ,
/* 12*/ { DATA_MODE , " \\ u0F " , ZINT_ERROR_INVALID_DATA , 0 , " Error 235: Incomplete unicode escape character in input data " , " " } ,
/* 13*/ { DATA_MODE , " \\ uFG " , ZINT_ERROR_INVALID_DATA , 0 , " Error 235: Incomplete unicode escape character in input data " , " " } ,
/* 14*/ { DATA_MODE , " \\ u00F " , ZINT_ERROR_INVALID_DATA , 0 , " Error 235: Incomplete unicode escape character in input data " , " " } ,
/* 15*/ { DATA_MODE , " \\ u00FG " , ZINT_ERROR_INVALID_DATA , 0 , " Error 236: Corrupt unicode escape character in input data " , " " } ,
2020-05-16 21:22:33 +12:00
} ;
int data_size = ARRAY_SIZE ( data ) ;
char escaped [ 1024 ] ;
for ( int i = 0 ; i < data_size ; i + + ) {
if ( index ! = - 1 & & i ! = index ) continue ;
struct zint_symbol * symbol = ZBarcode_Create ( ) ;
assert_nonnull ( symbol , " Symbol not created \n " ) ;
symbol - > debug = ZINT_DEBUG_TEST ; // Needed to get codeword dump in errtxt
2020-05-22 05:22:28 +12:00
int length = testUtilSetSymbol ( symbol , BARCODE_CODE128 , data [ i ] . input_mode | ESCAPE_MODE , - 1 /*eci*/ , - 1 /*option_1*/ , - 1 , - 1 , - 1 /*output_options*/ , data [ i ] . data , - 1 , debug ) ;
2020-05-16 21:22:33 +12:00
2020-10-04 10:51:08 +13:00
ret = ZBarcode_Encode ( symbol , ( unsigned char * ) data [ i ] . data , length ) ;
2020-05-16 21:22:33 +12:00
assert_equal ( ret , data [ i ] . ret , " i:%d ZBarcode_Encode ret %d != %d (%s) \n " , i , ret , data [ i ] . ret , symbol - > errtxt ) ;
if ( generate ) {
2020-05-22 05:22:28 +12:00
printf ( " /*%3d*/ { %s, \" %s \" , %s, %d, \" %s \" , \" %s \" }, \n " ,
i , testUtilInputModeName ( data [ i ] . input_mode ) , testUtilEscape ( data [ i ] . data , length , escaped , sizeof ( escaped ) ) ,
testUtilErrorName ( data [ i ] . ret ) , symbol - > width , symbol - > errtxt , data [ i ] . comment ) ;
2020-05-16 21:22:33 +12:00
} else {
if ( ret < 5 ) {
assert_equal ( symbol - > width , data [ i ] . expected_width , " i:%d symbol->width %d != %d (%s) \n " , i , symbol - > width , data [ i ] . expected_width , data [ i ] . data ) ;
assert_zero ( strcmp ( symbol - > errtxt , data [ i ] . expected ) , " i:%d strcmp(%s, %s) != 0 \n " , i , symbol - > errtxt , data [ i ] . expected ) ;
}
}
ZBarcode_Delete ( symbol ) ;
}
testFinish ( ) ;
}
2020-10-04 10:51:08 +13:00
static void test_cap ( int index ) {
2020-10-01 00:19:12 +13:00
testStart ( " " ) ;
unsigned int ret ;
struct item {
int symbology ;
unsigned cap_flag ;
unsigned int expected ;
} ;
// s/\/\*[ 0-9]*\*\//\=printf("\/*%2d*\/", line(".") - line("'<"))
struct item data [ ] = {
/* 0*/ { BARCODE_CODE128 , ZINT_CAP_HRT , ZINT_CAP_HRT } ,
/* 1*/ { BARCODE_CODE128 , ZINT_CAP_HRT | ZINT_CAP_STACKABLE | ZINT_CAP_GS1 , ZINT_CAP_HRT | ZINT_CAP_STACKABLE } ,
/* 2*/ { BARCODE_PDF417 , ZINT_CAP_HRT | ZINT_CAP_ECI | ZINT_CAP_GS1 | ZINT_CAP_READER_INIT | ZINT_CAP_FULL_MULTIBYTE , ZINT_CAP_ECI | ZINT_CAP_READER_INIT } ,
/* 3*/ { BARCODE_QRCODE , ZINT_CAP_HRT | ZINT_CAP_ECI | ZINT_CAP_GS1 | ZINT_CAP_DOTTY | ZINT_CAP_READER_INIT | ZINT_CAP_FULL_MULTIBYTE , ZINT_CAP_ECI | ZINT_CAP_GS1 | ZINT_CAP_DOTTY | ZINT_CAP_FULL_MULTIBYTE } ,
/* 4*/ { BARCODE_EANX_CC , ZINT_CAP_HRT | ZINT_CAP_COMPOSITE | ZINT_CAP_EXTENDABLE | ZINT_CAP_ECI | ZINT_CAP_GS1 , ZINT_CAP_HRT | ZINT_CAP_COMPOSITE | ZINT_CAP_EXTENDABLE | ZINT_CAP_GS1 } ,
/* 5*/ { BARCODE_HANXIN , ZINT_CAP_DOTTY | ZINT_CAP_FIXED_RATIO | ZINT_CAP_FULL_MULTIBYTE , ZINT_CAP_DOTTY | ZINT_CAP_FIXED_RATIO | ZINT_CAP_FULL_MULTIBYTE } ,
/* 6*/ { BARCODE_CODE11 , ZINT_CAP_DOTTY | ZINT_CAP_FIXED_RATIO | ZINT_CAP_READER_INIT | ZINT_CAP_FULL_MULTIBYTE , 0 } ,
/* 7*/ { BARCODE_POSTNET , ZINT_CAP_HRT | ZINT_CAP_STACKABLE | ZINT_CAP_EXTENDABLE | ZINT_CAP_COMPOSITE | ZINT_CAP_ECI | ZINT_CAP_GS1 | ZINT_CAP_DOTTY | ZINT_CAP_FIXED_RATIO | ZINT_CAP_READER_INIT | ZINT_CAP_FULL_MULTIBYTE , 0 } ,
/* 8*/ { 0 , 0 , 0 } ,
} ;
int data_size = ARRAY_SIZE ( data ) ;
for ( int i = 0 ; i < data_size ; i + + ) {
if ( index ! = - 1 & & i ! = index ) continue ;
ret = ZBarcode_Cap ( data [ i ] . symbology , data [ i ] . cap_flag ) ;
assert_equal ( ret , data [ i ] . expected , " i:%d ZBarcode_Cap(%s, 0x%X) 0x%X != 0x%X \n " , i , testUtilBarcodeName ( data [ i ] . symbology ) , data [ i ] . cap_flag , ret , data [ i ] . expected ) ;
}
testFinish ( ) ;
}
2020-03-27 11:17:37 +13:00
// #181 Nico Gunkel OSS-Fuzz
2020-05-06 09:28:25 +12:00
static void test_encode_file_zero_length ( void ) {
2020-03-27 11:17:37 +13:00
testStart ( " " ) ;
int ret ;
char filename [ ] = " in.bin " ;
int fd ;
2020-05-06 09:28:25 +12:00
struct zint_symbol * symbol = ZBarcode_Create ( ) ;
2020-03-27 11:17:37 +13:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
( void ) remove ( filename ) ; // In case junk hanging around
fd = creat ( filename , S_IRUSR ) ;
assert_nonzero ( fd , " Input file not created \n " ) ;
assert_zero ( close ( fd ) , " close(%s) != 0 \n " , filename ) ;
ret = ZBarcode_Encode_File ( symbol , filename ) ;
assert_equal ( ret , ZINT_ERROR_INVALID_DATA , " ret %d != ZINT_ERROR_INVALID_DATA \n " , ret ) ;
assert_zero ( remove ( filename ) , " remove(%s) != 0 \n " , filename ) ;
ZBarcode_Delete ( symbol ) ;
testFinish ( ) ;
}
// #181 Nico Gunkel OSS-Fuzz (buffer not freed on fread() error) Note: unable to reproduce fread() error using this method
2020-05-06 09:28:25 +12:00
static void test_encode_file_directory ( void ) {
2020-03-27 11:17:37 +13:00
testStart ( " " ) ;
int ret ;
char dirname [ ] = " in_dir " ;
2020-05-06 09:28:25 +12:00
struct zint_symbol * symbol = ZBarcode_Create ( ) ;
2020-03-27 11:17:37 +13:00
assert_nonnull ( symbol , " Symbol not created \n " ) ;
( void ) rmdir ( dirname ) ; // In case junk hanging around
assert_zero ( mkdir ( dirname , 0700 ) , " mkdir(%s, 0700) != 0 \n " , dirname ) ;
ret = ZBarcode_Encode_File ( symbol , dirname ) ;
assert_equal ( ret , ZINT_ERROR_INVALID_DATA , " ret %d != ZINT_ERROR_INVALID_DATA (%s) \n " , ret , symbol - > errtxt ) ;
assert_zero ( rmdir ( dirname ) , " rmdir(%s) != 0 \n " , dirname ) ;
ZBarcode_Delete ( symbol ) ;
testFinish ( ) ;
}
2020-10-01 00:19:12 +13:00
static void test_bad_args ( void ) {
testStart ( " " ) ;
int ret ;
char * data = " 1 " ;
char * filename = " 1.png " ;
char * empty = " " ;
// These just return, no error
ZBarcode_Clear ( NULL ) ;
ZBarcode_Delete ( NULL ) ;
ret = ZBarcode_Version ( ) ;
assert_nonzero ( ret > = 20901 , " ZBarcode_Version() %d <= 20901 \n " , ret ) ;
assert_zero ( ZBarcode_ValidID ( 0 ) , " ZBarcode_ValidID(0) non-zero \n " ) ;
assert_zero ( ZBarcode_ValidID ( 10 ) , " ZBarcode_ValidID(10) non-zero \n " ) ; // Note 10 remapped to BARCODE_EANX in ZBarcode_Encode() for tbarcode compat but not counted as valid
ret = ZBarcode_Cap ( 0 , ~ 0 ) ;
assert_zero ( ret , " ZBarcode_Cap(0, ~0) ret 0x%X != 0 \n " , ret ) ;
ret = ZBarcode_Cap ( 10 , ~ 0 ) ;
assert_zero ( ret , " ZBarcode_Cap(10, ~0) ret 0x%X != 0 \n " , ret ) ;
// NULL symbol
2020-10-04 10:51:08 +13:00
assert_equal ( ZBarcode_Encode ( NULL , ( unsigned char * ) data , 1 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode(NULL, data, 1) != ZINT_ERROR_INVALID_DATA \n " ) ;
2020-10-01 00:19:12 +13:00
assert_equal ( ZBarcode_Print ( NULL , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Print(NULL, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_equal ( ZBarcode_Buffer ( NULL , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Buffer(NULL, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_equal ( ZBarcode_Buffer_Vector ( NULL , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Buffer_Vector(NULL, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
2020-10-04 10:51:08 +13:00
assert_equal ( ZBarcode_Encode_and_Print ( NULL , ( unsigned char * ) data , 1 , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_and_Print(NULL, data, 1, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_equal ( ZBarcode_Encode_and_Buffer ( NULL , ( unsigned char * ) data , 1 , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_and_Buffer(NULL, data, 1, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
2020-10-01 00:19:12 +13:00
assert_equal ( ZBarcode_Encode_File ( NULL , filename ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File(NULL, filename) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_equal ( ZBarcode_Encode_File_and_Print ( NULL , filename , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File_and_Print(NULL, filename, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_equal ( ZBarcode_Encode_File_and_Buffer ( NULL , filename , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File_and_Buffer(NULL, filename, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
struct zint_symbol * symbol = ZBarcode_Create ( ) ;
assert_nonnull ( symbol , " Symbol not created \n " ) ;
// NULL data/filename
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode ( symbol , NULL , 1 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode(symbol, NULL, 1) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode(symbol, NULL, 1) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_and_Print ( symbol , NULL , 1 , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_and_Print(symbol, NULL, 1, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_and_Print(symbol, NULL, 1, 0) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_and_Buffer ( symbol , NULL , 1 , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_and_Buffer(symbol, NULL, 1, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_and_Buffer(symbol, NULL, 1, 0) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_File ( symbol , NULL ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File(symbol, NULL) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_File(symbol, NULL) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_File_and_Print ( symbol , NULL , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File_and_Print(symbol, NULL, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_File_and_Print(symbol, NULL, 0) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_File_and_Buffer ( symbol , NULL , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File_and_Buffer(symbol, NULL, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_File_and_Buffer(symbol, NULL, 0) no errtxt \n " ) ;
// Empty data/filename
symbol - > errtxt [ 0 ] = ' \0 ' ;
2020-10-04 10:51:08 +13:00
assert_equal ( ZBarcode_Encode ( symbol , ( unsigned char * ) empty , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode(symbol, empty, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
2020-10-01 00:19:12 +13:00
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode(symbol, empty, 0) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
2020-10-04 10:51:08 +13:00
assert_equal ( ZBarcode_Encode_and_Print ( symbol , ( unsigned char * ) empty , 0 , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_and_Print(symbol, empty, 0, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
2020-10-01 00:19:12 +13:00
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_and_Print(symbol, empty, 0, 0) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
2020-10-04 10:51:08 +13:00
assert_equal ( ZBarcode_Encode_and_Buffer ( symbol , ( unsigned char * ) empty , 0 , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_and_Buffer(symbol, empty, 0, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
2020-10-01 00:19:12 +13:00
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_and_Buffer(symbol, empty, 0, 0) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_File ( symbol , empty ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File(symbol, empty) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_File(symbol, empty) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_File_and_Print ( symbol , empty , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File_and_Print(symbol, empty, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_File_and_Print(symbol, empty, 0) no errtxt \n " ) ;
symbol - > errtxt [ 0 ] = ' \0 ' ;
assert_equal ( ZBarcode_Encode_File_and_Buffer ( symbol , empty , 0 ) , ZINT_ERROR_INVALID_DATA , " ZBarcode_Encode_File_and_Buffer(symbol, empty, 0) != ZINT_ERROR_INVALID_DATA \n " ) ;
assert_nonzero ( strlen ( symbol - > errtxt ) , " ZBarcode_Encode_File_and_Buffer(symbol, empty, 0) no errtxt \n " ) ;
ZBarcode_Delete ( symbol ) ;
testFinish ( ) ;
}
2020-11-02 07:32:55 +13:00
static void test_valid_id ( void ) {
testStart ( " " ) ;
int ret ;
const char * name ;
for ( int symbol_id = - 1 ; symbol_id < 160 ; symbol_id + + ) {
ret = ZBarcode_ValidID ( symbol_id ) ;
name = testUtilBarcodeName ( symbol_id ) ;
assert_nonnull ( name , " testUtilBarcodeName(%d) NULL \n " , symbol_id ) ;
if ( ret ) {
assert_equal ( ret , 1 , " ZBarcode_Valid(%d) != 1 \n " , symbol_id ) ;
assert_nonzero ( * name ! = ' \0 ' , " testUtilBarcodeName(%d) empty when ZBarcode_Valid() true \n " , symbol_id ) ;
} else {
assert_zero ( ret , " ZBarcode_Valid(%d) != 0 \n " , symbol_id ) ;
assert_zero ( * name , " testUtilBarcodeName(%d) non-empty when ZBarcode_Valid() false \n " , symbol_id ) ;
}
}
testFinish ( ) ;
}
2020-05-06 09:28:25 +12:00
int main ( int argc , char * argv [ ] ) {
testFunction funcs [ ] = { /* name, func, has_index, has_generate, has_debug */
{ " test_checks " , test_checks , 1 , 0 , 1 } ,
{ " test_input_mode " , test_input_mode , 1 , 0 , 1 } ,
2020-05-16 21:22:33 +12:00
{ " test_escape_char_process " , test_escape_char_process , 1 , 1 , 1 } ,
2020-10-04 10:51:08 +13:00
{ " test_cap " , test_cap , 1 , 0 , 0 } ,
2020-05-06 09:28:25 +12:00
{ " test_encode_file_zero_length " , test_encode_file_zero_length , 0 , 0 , 0 } ,
{ " test_encode_file_directory " , test_encode_file_directory , 0 , 0 , 0 } ,
2020-10-01 00:19:12 +13:00
{ " test_bad_args " , test_bad_args , 0 , 0 , 0 } ,
2020-11-02 07:32:55 +13:00
{ " test_valid_id " , test_valid_id , 0 , 0 , 0 } ,
2020-05-06 09:28:25 +12:00
} ;
testRun ( argc , argv , funcs , ARRAY_SIZE ( funcs ) ) ;
2019-10-17 22:06:21 +13:00
testReport ( ) ;
return 0 ;
}